Temperature-Dependent Bifurcated Seasonal Shift of Phytoplankton Community Composition in the Coastal Water off Southwestern Korea

Ocean Science Journal - Coastal water around the archipelago off southwestern Korea has been bathed in an unprecedented pool of warm water in summer in recent years. Here, we examined phytoplankton...     

Effects of flexibility on propulsive force acting on a heaving foil

The hybrid Cartesian/immersed boundary method is applied to simulate effects of flexibility on propulsive force acting on a heaving foil in a viscous flow. Immersed boundary nodes are distributed inside an instantaneous fluid domain. Velocity vector is reconstructed at the immersed boundary node based on an interpolation along a local normal line. Using the staggered/non-staggered grid method, the demand for pressure at boundary nodes is removed. Elastic deformation of the flexible foil is modelled based on the dynamic thin-plate mechanics. The developed code is validated through comparisons with other computations on flow fields around a flapping foil. The generation of the reverse Karman vortex street is investigated. Forces acting on heaving foils are compared for flexible and rigid cases and the increased thrust of the flexible foil is attributed to the deformed configuration near the tip. The flexibility of the heaving foil decreases vertical force and improves propulsion efficiency. The variations of force and deformation are investigated according to bending stiffness of the foil.     

湖南省柿竹园矽卡岩矿床中石榴石特征

通过野外与显微镜观察和电子探针分析, 对柿竹园多金属矿床矽卡岩中石榴石的特征进行了研究.根据石榴石的产出状态、矿物的共生组合, 矽卡岩可分为4个带: 磁铁矿-辉石-石榴石带、辉石-石榴石带、符山石-石榴石带、矽卡岩化大理岩带.从成分上的变化, 探讨了石榴石在各矽卡岩带中的特征.柿竹园矿床矽卡岩中的石榴石可分为早、晚两期, 早期形成的石榴石颜色为暗棕色, 并且在垂直和水平方向上有明显的变化规律.从磁铁矿-辉石-石榴石带到矽卡岩化大理石带, 随着石榴石中Fe₂O₃含量的减少, Al₂O₃含量的增加, 由钙铁榴石向钙铝榴石变化; 石榴石晶体具有从核部向边缘由均质性向非均质性变化的规律.早期石榴石形成于较氧化的条件下, 温度为520~620℃, 压力为1000×105Pa, 由富含Si, Al, Fe, Cl, F组分的热液和泥盆纪佘田桥组灰岩反应交代形成.当温度降至450~ 540℃, pH, Eh值降低时, 晚期石榴石形成的同时使白钨矿沉淀.晚期石榴石颜色比早期形成的石榴石浅, 为红色.结晶颗粒较大, 并且, 普遍可以观察到石榴石环带结构.      

The Kyonggi Shear Zone of the Central Korean Peninsula: Late Orogenic Imprint of the North and South China Collision

The crustal-scale Kyonggi shear zone of central Korea has been identified as a major boundary between the Precambrian Kyonggi massif in the south and the Imjingang belt in the north. The latter is an eastward extension of the Qinling-Dabie-Sulu collisional belt of China. Field observations and microstructural analysis indicate that the extensional shear zone evolved from a deep crustal ductile regime to a shallow crustal brittle regime, associated with a rapid uplift of the Kyonggi massif following the Late Permian-Early Triassic collision between the Sino-Korean and Yangtze cratons. A Rb-Sr muscovite age (226+/-1.2 Ma) of the mylonite suggests that the extensional ductile shearing occurred during the Late Triassic.     

Lower palaeozoic and precambrian petroleum source rocks and the coalification path of alginite

Organic-rich samples derived from a Middle Cambrian Formation in the Georgina Basin, and from the Middle Proterozoic of the McArthur Basin in northern and central Australia, yielded alginite ranging from immature oil shale material to overmature residue. A maturation scale has been developed based on the thermal evolution of alginite as determined from reflectance and fluorescence. The coalification path of alginite is marked by jumps in contrast to the linear path of wood-derived vitrinite. Six zones have been recognised, ranging from undermature (zone I), through the mature (zones II/III), followed by a stable stage of no change (zone IV) to the overmature (zones V and VI). The onset of oil generation in alginite as evident from the present study is at 0.3% R_{o Alg.} and is expressed in a change of fluorescence from yellow to brown, and a coalification jump from 0.3 to 0.6% R_o of Alg. In many boreholes zone III can be distinguished between 0.6 and 0.8% R_o of Alg. where subsequent oil generation occurs. Zones II and III represent the oil window.A zone of little or no change designated zone IV, at of alginite follows zones II/III. A marked coalification jump characterises zone V, where a pronounced change in reflectance occurs to >1.0% R_{o Alg.}, signifying peak gas generation. The border of oil preservation lies at the transition of zone V and VI, at 1.6% R_{o Alg.} In zone VI gas generation only occurs.Comparison of reflectance results with experimental and geochemical pyrolysis data supports high activation energies for hydrocarbon generation from alginite, and therefore a later onset of oil generation than other liptinite macerals (i.e. cutinite, exinite, resinite) as well as a narrow oil window.Transmission electron microscopy (TEM) confirms that alginite does not go through a distinct intermediate stage but that the percentage of unreacted organic matter decreases as maturation proceeds. A clear distinction can be made in TEM between immature alginite, alginite after oil generation, and alginite residue following gas generation. Alginite beyond 1.6% R_o acquires very high densities and the appearance of inertinite in TEM.Bitumens/pyrobitumens make a pronounced contribution to the organic matter throughout the basins and have been shown to effect pyrolysis results by suppressing T_max. The bitumens/pyrobitumens have been divided into four groups, based on their reflectance and morphology, which in turn appears to be an expression of their genetic history. Their significance is in aiding the understanding of the basins' thermal history, and the timing of oil and gas generation.     

Quantitative Assessment of Extrinsic Damage in Rock Materials

Summary   Comminution (crushing and grinding) of rock materials is energy-intensive and expensive. Much effort has been directed to improve the efficiency of conventional milling practice, but relatively little attention has been given to the potential benefits of blast-induced (extrinsic) damage on comminution processes. The objective of this research is to investigate the effect of shock-induced “crack-like” damage on rock properties for three petrologically distinct rock materials under laboratory conditions. In order to evaluate the effect of shock-induced damage, a quantitative measure of rock damage is needed. Shock loading of rock material was accomplished with an explosively driven split Hopkinson pressure bar. Laboratory measurements show that the average uniaxial compressive strengths for damaged specimens are slightly lower than those for intact specimens. Based on damage mechanics, the scalar damage variable () was experimentally determined as the relative reduction in ultrasonic wave velocity of damaged versus intact rock. increases as the shock energy dissipated in rock material increases. A crack density was determined by confocal image analysis. Measurements following shock loading indicate that ultrasonic wave velocity in rock partially recovers with time. Ultrasonic wave velocity and confocal image analysis may be useful in quantitatively assessing the internal crack-like damage in rock materials.     

The practicalities of using CFCs and SF6 for groundwater dating and tracing

Knowledge of groundwater residence time is important in understanding key issues in the evolution of water quality, whether this occurs due to water–rock interaction or simply by mixing or contamination. The build-up in the atmosphere of the trace gases chlorofluorocarbons (CFCs) and sulphur hexafluoride (SF₆) from the middle of the last century offers a convenient way of dating waters up to ∼60 a old. The gases are well-mixed in the atmosphere so their input functions are not area-specific as is the case with ³H. While any one of these trace gases can in principle provide a groundwater age, when two or more are measured on water samples the potential exists to distinguish between different modes of flow including piston flow, exponential flow and simple end-member mixing. As with all groundwater dating methods, caveats apply. Factors such as recharge temperature and elevation must be reasonably well-constrained. Primarily for SF₆, the phenomenon of ‘excess air’ also requires consideration. Primarily for the CFCs, local sources of contamination need to be considered, as do redox conditions. For both SF₆ and the CFCs, the nature and thickness of the unsaturated zone need to be factored into residence time calculations. However, as an inexpensive dating method, the trace gases can be applied to a wide range of groundwater problems where traditional age indicators might once have been used more sparingly. Examples include tracing flowlines, detecting small modern inputs in ‘old’ waters, and pollution risk assessment. In the future, with the main CFCs already declining in the atmosphere, new anthropogenic trace gases are likely to take their place.     

Crustal structure of the continental margin of Korea in the East Sea (Japan Sea) from deep seismic sounding data: evidence for rifting affected by the hotter than normal mantle

Despite the various opening models of the southwestern part of the East Sea (Japan Sea) between the Korean Peninsula and the Japan Arc, the continental margin of the Korean Peninsula remains unknown in crustal structure. As a result, continental rifting and subsequent seafloor spreading processes to explain the opening of the East Sea have not been adequately addressed. We investigated crustal and sedimentary velocity structures across the Korean margin into the adjacent Ulleung Basin from multichannel seismic (MCS) reflection and ocean bottom seismometer (OBS) data. The Ulleung Basin shows crustal velocity structure typical of oceanic although its crustal thickness of about 10 km is greater than normal. The continental margin documents rapid transition from continental to oceanic crust, exhibiting a remarkable decrease in crustal thickness accompanied by shallowing of Moho over a distance of about 50 km. The crustal model of the margin is characterized by a high-velocity (up to 7.4 km/s) lower crustal (HVLC) layer that is thicker than 10 km under the slope base and pinches out seawards. The HVLC layer is interpreted as magmatic underplating emplaced during continental rifting in response to high upper mantle temperature. The acoustic basement of the slope base shows an igneous stratigraphy developed by massive volcanic eruption. These features suggest that the evolution of the Korean margin can be explained by the processes occurring at volcanic rifted margins. Global earthquake tomography supports our interpretation by defining the abnormally hot upper mantle across the Korean margin and in the Ulleung Basin.     

Discovery of Pyrrhotite-Chalcopyrite-Bearing Amphibole Megacrysts in Tongling Area, Anhui Province

Some pyrrhotite-chalcopyrite-bearing amphibole megacrysts (including pyroxene megacrysts) were discovered in Mesozoic augite diorite-porphyrite at Caoshan in Tongling area, Anhui Province. The amphibole megacrysts, belonging mainly to pargasite and magnesiohastingsite, are characteristic of the amphibole composition derived from mantle and crystallized in lower crust. In general, the aggregates of pyrrhotite-chalcopyrite take the shapes of cylinder and sphere. Three occurrences have been recognized in the amphibole megacrysts: parallel linear, bunchy and scattered. The unique cylinder-like shape of the aggregates and remarkable Ni-poor sulfides in Caoshan are distinctively different from the spherical Ni-rich sulfides in pyroxene megacrysts and any other kinds of megacrysts. In terms of composition, the amphibole megacrysts and their sulfides in Caoshan are similar to those in the pyroxenite xenoliths in Qilin, Guangdong Province. In terms of origin, the pyrrhotite-chalcopyrites as exsolution products resulted from the subsolidus re-equilibration of sulfide solid solution within amphibole megacrysts.amphibole megacrysts were first discovered inside and outside China. This discovery is important for the study of regional magma evolution and its associated mineralizations and ore sources as well.