3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

Velocity structure in the South Yellow Sea basin based on first-arrival tomography of wide-angle seismic data and its geological implications

The South Yellow Sea basin is filled with Mesozoic–Cenozoic continental sediments overlying pre-Palaeozoic and Mesozoic–Palaeozoic marine sediments. Conventional multi-channel seismic data cannot describe the velocity structure of the marine residual basin in detail, leading to the lack of a deeper understanding of the distribution and lithology owing to strong energy shielding on the top interface of marine sediments. In this study, we present seismic tomography data from ocean bottom seismogra...     

Factors influencing the oxidation,reduction, methylation and demethylation of mercury species in coastal waters

The objective of this study was to examine the redox reactions and other transformations of mercury (Hg) species in surface waters, and the factors determining the rates of these reactions. For the redox studies completed at the Chesapeake Biological Laboratory (CBL), two isotopes (¹⁹⁹Hg^II and ²⁰²Hg⁰) were added into different types of filtered water (fresh to seawater) to examine the oxidation and reduction reactions. Further studies of both the redox reactions and methylation/demethylation reactions of Hg were conducted with unfiltered water on board research vessels during cruises in May and July 2005 on the Chesapeake Bay and shelf. While CH₃¹⁹⁹Hg^II was added to allow the examination of demethylation, ²⁰¹Hg^II was used to examine both reduction and methylation, and ²⁰²Hg⁰ was used to examine oxidation. Overall, the results showed that both Hg oxidation and reduction were simultaneously occurring and were photochemically mediated in the waters investigated. In contrast to the previously assumed “unreactive” nature of Hg⁰, the studies found that the magnitude of the rate constant for Hg⁰ oxidation was greater than that for reduction, indicating its importance in estuarine and coastal waters. In addition, both experiments at CBL and on board ship showed that Hg^II reduction was similar in magnitude, suggesting that biotic processes were relatively unimportant. While no measurable methylation occurred during the incubation period during the on board studies, concentration of CH₃¹⁹⁹Hg^II decreased over the time during the experiments. It appeared that the demethylation processes were not dominantly photochemically driven, but could be microbially mediated. Further studies are needed in order to help better understand Hg redox and transformations in natural water systems.     

Three‐dimensional simulation of tsunami run‐up around conical island

At the circular Babi Island in the Flores tsunami (1992) and pear shaped island in the Okushiri event (1993), unexpectedly large tsunami run‐up heights in the lee of conic islands were observed. The flume and basin physical model studies were conducted in the Coastal Hydraulic Laboratory, Engineering Research and Development Center, U.S. Army Corps of Engineers to provide a better understanding of the physical phenomena and verify numerical models used in predicting tsunami wave run‐up on beaches, islands, and vertical walls. Reasonably accurate comparison of run‐up height of solitary waves on a circular island has been obtained between laboratory experimental results and two‐dimensional computation model results. In this study we apply three‐dimensional RANS model to simulate wave run‐up on conical island. In the run‐up computation we obtain that 3D calculations are in very good comparison with laboratory and 2D numerical results. A close examination of the three‐dimensional velocity distribution around conical island to compare with depth‐integrated model is performed. It is shown that the velocity distribution along the vertical coordinate is not uniform: and velocity field is weaker in the bottom layer and higher on the sea surface. The maximum difference (about 40%) appears at the time when solitary wave reached the circular island.     

Expanded adaptive fuzzy sliding mode controller using expert knowledge and fuzzy basis function expansion for UFV depth control

Generally, the underwater flight vehicle (UFV) depth control system operates with the following problems: it is a multi-input multi-output (MIMO) system, it requires robustness, a continuous control input, and further, it has the speed dependency of controller parameters. To solve these problems, an expanded adaptive fuzzy sliding mode controller (EAFSMC), which is based on the decomposition method designed by using an expert knowledge and the decoupled sub-controllers and composition method designed by using the fuzzy basis function expansions (FBFEs), is proposed. To verify the performance of the EAFSMC, the depth control of UFV in various operating conditions is performed. Simulation results show that the EAFSMC solves all problems experienced in the UFV depth control system online.     

Internal generation of waves: Delta source function method and source term addition method

In this study, we investigate two internal wave generation methods in numerical modeling of time-dependent equations for water wave propagation, i.e., delta source function method and source term addition method, the latter of which has been called the line source method in literatures. We derive delta source functions for the Boussinesq-type equations and extended mild-slope equations. By applying the fractional step splitting method, we show that the delta source function method is equivalent to the source term addition method employing the energy velocity. This suggests that the energy velocity should be used rather than the phase velocity for the transport of incident wave energy in the source term addition method. Finally, the performance of the delta source function method is verified by accurately generating nonlinear cnoidal waves as well as linear waves for horizontally one-dimensional cases.     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.     

Effects of an Artificial Breakwater on the Distributions of Planktonic Microbial Communities

The summer distributions of planktonic microbial communities (heterotrophic and phtosynthetic bacteria, phtosynthetic and heterotrophic nanoflagellates, ciliate plankton, and microphytoplankton) were compared between inner and outer areas of Lake Sihwa, divided by an artificial breakwater, located on the western coast of Korea, in September 2003. The semienclosed, inner area was characterized by hyposaline surface water (<17 psu), and by low concentrations of dissolved oxygen (avg. 0.4 mg L¹) and high concentrations of inorganic nutrients (nitrogenous nutrients >36 μM, phosphate <4 μM) in the bottom layer. Higher densities of heterotrophic bacteria and nanoflagellates also occurred in the inner area than did in the outer area, while microphytoplankton (mainly diatoms) occurred abundantly in the outer area. A tiny tintinnid ciliate, Tintinnopsis nana, bloomed into more than 10⁶ cells L¹ at the surface layer of the inner area, while its abundance was much lower (10³-10⁴ cells L¹) in the outer area of the breakwater. Ciliate abundance was highly correlated with heterotrophic bacteria (r = 0.886, p < 0.001) and heterotrophic flagellates (r = 0.962, p < 0.001), indicating that rich food availability may have led to theT. nana bloom. These results suggest that the breakwater causes the eutrophic environment in artificial lakes with limited flushing of enriched water and develops into abundant bacteria, nanoflagellates, and ciliates.     

Empirical ocean-color algorithms to retrieve chlorophyll-a, total suspended matter, and colored dissolved organic matter absorption coefficient in the Yellow and East China Seas

A bio-optical dataset collected during the 1998?C2007 period in the Yellow and East China Seas (YECS) was used to provide alternative empirical ocean-color algorithms in the retrieval of chlorophyll-a (Chl-a), total suspended matter (TSM), and colored dissolved organic matter (CDOM) absorption coefficients at 440 nm (ag₄₄₀). Assuming that remote-sensing reflectance (Rrs) could be retrieved accurately, empirical algorithms for T_Chl (regionally tuned Tassan??s Chl-a algorithm) in case-1 waters (T_Chl2i in case-2 waters), T_TSM (regionally tuned Tassan??s TSM algorithm), and T_ag440 or C_ag440 (regionally tuned Tassan??s or Carder??s ag₄₄₀ algorithm) were able to retrieve Chl-a, TSM, and ag₄₄₀ with uncertainties as high as 35, 46, and 35%, respectively. Applying the standard SeaWiFS Rrs, T_Chl was not viable in the eastern part of the YECS, which was associated with an inaccurate SeaWiFS Rrs retrieval because of improper atmospheric correction. T_Chl behaved better than other algorithms in the turbid case-2 waters, although overestimation was still observed. To retrieve more reliable Chl-a estimates with standard SeaWiFS Rrs in turbid water (a proxy for case-2 waters), we modified T_Chl for data with SeaWiFS normalized water-leaving radiance at 555 nm (nLw₅₅₅) > 2 mW cm^?2 ??m^?1 sr^?1 (T_Chl2s). Finally, with standard SeaWiFS Rrs, we recommend switching algorithms from T_Chl2s (for case-2 waters) to MOC_Chl (SeaWiFS-modified NASA OC4v4 standard algorithm for case-1 waters) for retrieving Chl-a, which resulted in uncertainties as high as 49%. To retrieve TSM and ag₄₄₀ using SeaWiFS Rrs, we recommend empirical algorithms for T_TSM (pre-SeaWiFS-modified form) and MT_ag440 or MC_ag440 (SeaWiFS Rrs-modified forms of T_ag440 or C_ag440). These could retrieve with uncertainties as high as 82 and 52%, respectively.     

Numerical analysis and validation of weakly nonlinear ship motions and structural loads on a modern containership

This paper aims to validate a numerical seakeeping code based on a 3D Rankine panel method by comparing its results with experimental data. Particularly, the motion response and hull-girder loads on a real modern ship, a 6500 TEU containership, are considered in this validation study. The method of solution is a 3D Rankine panel method which adopts B-spline basis function in the time domain. The numerical code is based on the weakly nonlinear scheme which considers nonlinear Froude-Krylov and restoring forces. The main focus of this study is given to investigate the nonlinear characteristics of wave-induced loads, and to validate this present scheme for industrial use in the range of low Froude number. The comparisons show that the nonlinear motions and hull-girder loads, computed by the present numerical code, have good overall agreements with experimental results. It is found that, for the better accuracy of computational results, particularly at extreme waves in oblique seas, the careful treatment of soft-spring (or compatible) system is recommended to the control of non-restoring motions such as surge, sway, and yaw.