Application of an optimum design technique for determining the coefficient of consolidation by using piezocone test data

For normally consolidated clay, several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation from piezocone test results. However, depending on assumptions and analytical techniques, it could vary considerably, even for a specific degree of consolidation. In this paper a method is proposed to determine a consistent coefficient of consolidation by applying the concept of an optimum design technique over all ranges of the degree of consolidation. Initial excess pore pressure distribution is assumed to be capable of being obtained by the successive spherical cavity expansion theory. The dissipation of pore pressure is simulated by means of a two-dimensional linear-uncoupled axi-symmetric consolidation analysis. The minimization of differences between measured and predicted excess pore pressure was carried out by the BFGS unconstrained optimum design algorithm with a one-dimensional golden section search technique. By analyzing numerical examples and in-situ test results, it was found that the adopted optimum design technique gives consistent and convergent results.     

Regime interplay: the case of biodiversity and climate change

In this paper, the interplay between the biodiversity and climate change regimes is examined in the context of a case study. An understanding of how the regimes interact is crucial to their successful operation, since it provides insight into how policy options might be drawn up to create synergy rather than conflict among the respective regimes’ objectives. Despite the increasing importance of the study of regime interplay, due to its potential influence on regime effectiveness, there is limited understanding of why regimes interact and how their interplay may affect their successful operation, since few empirical studies have been conducted in this area. By analysing the causes of the regime interplay and the potential effects thereof, this paper draws policy implications regarding how the interacting regimes might be better co-ordinated to create synergy.     

Influence of the total atmospheric optical depth and cloud cover on solar irradiance components

Broadband solar irradiance data obtained in the spectral range 400–940 nm at Kwangju, South Korea from 1999–2000 have been analyzed to investigate the effects of cloud cover and atmospheric optical depth on solar radiation components. Results from measurements indicate that the percentage of direct and diffuse horizontal components of solar irradiance depend largely on total optical depth (TOD) and cloud cover. During summer and spring, the percentages of diffuse solar irradiance relative to the global irradiance were 5.0% and 4.9% as compared to 2.2% and 3.0% during winter and autumn. The diffuse solar irradiance is higher than the direct in spring and summer by 24.2%, and 40.6%, respectively, which may largely be attributed to the attenuation (scattering) of radiation by heavy dust pollution and large cloud amount. In cloud-free conditions with cloud cover ≤2/10, the fraction of the direct and diffuse components were 66.0% and 34.0%, respectively, with a mean daily global irradiance value of 7.92±2.91 MJ m⁻² day⁻¹. However, under cloudy conditions (with cloud cover ≥8/10), the diffuse and direct fractions were 97.9% and 2.2% of the global component, respectively. The annual mean TOD under cloudless conditions (cloud cover≤2/10) yields 0.74±0.33 and increased to as much as 3.15±0.67 under cloudy conditions with cloud amount ≥8/10. An empirical formula is derived for estimating the diffuse and direct components of horizontal solar irradiance by considering the total atmospheric optical depth (TOD). Results from statistical models are shown for the estimation of solar irradiance components as a function of TOD with sufficient accuracy as indicated by low standard error for each solar zenith angle (SZA).     

Use of microtremor measurement for assessing site effects in Northern Belgium – interpretation of the observed intensity during the MS = 5.0 June 11 1938 earthquake

To provide quantitative information on site effects in the northern part of Belgium, forty-seven H/V microtremor measurements were performed with 5 second seismometers over an area of about 15.000 km². Most of the results show a northward regular increase of the fundamental period in agreement with the augmentation of the Mesozoic and Cainozoic soft sedimentsthickness from a few meters 40 km south of Brussels to 900 m at the Netherlands-Belgium border. The measured resonance frequency values wereconsistent with theoretical computations performed at different sites onthe basis of existing information and shallow seismic experiments. At oneparticular site (Uccle) where borehole data were available, microtremor measurements using an array of four seismological stations with differentapertures allowed to obtain the low frequency part of the Rayleigh wave dispersion curve, extending the range covered by the analysis of surfacewaves artificially generated. The Vs profile derived from the surface waveinversion corroborates the 1 Hz natural frequency of the site. Comparison of these results with the macroseismic information concerning the M_S = 5.0 1938 earthquake which occurred 50 km west of Brussels,confirmed the hypothesis that the geological structure of the Brabant massifis likely to control damage distribution during such an earthquake. Comparisonbetween the intensity map of the 1938 earthquake and the resonance period ofsediments obtained by our microtremor study shows a clear relation betweenthe two parameters. During the 1938 earthquake, site effects played a prominent role due to the dimension of the source whose corner frequency wasabout 1 Hz.     

Similarities between strike-slip faults at different scales and a simple age determining method for active faults

Abstract Several differently scaled strike‐slip faults were examined. The faults shared many geometric features, such as secondary fractures and linkage structures (damage zones). Differences in fault style were not related to specific scale ranges. However, it was recognized that differences in style may occur in different tectonic settings (e.g. dilational/contractional relays or wall/linkage/tip zones), different locations along the master fault or different fault evolution stages. Fractal dimensions were compared for two faults (Gozo and San Andreas), which supports the idea of self‐similarity. Fractal dimensions for traces of faults and fractures of damage zones were higher (D ～1.35) than for the main fault traces (D ～1.005) because of increased complexity due to secondary faults and fractures. Based on the statistical analysis of another fault evolution study, single event movements in earthquake faults typically have a maximum earthquake slip : rupture length ratio of approximately 10^?4, although this has only been established for large earthquake faults because of limited data. Most geological faults have a much higher maximum cumulative displacement : fault length ratio; that is, approximately 10^?2 to 10^?1 (e.g. Gozo, ～10^?2; San Andreas, ～10^?1). The final cumulative displacement on a fault is produced by accumulation of slip along ruptures. Hence, using the available information from earthquake faults, such as earthquake slip, recurrence interval, maximum cumulative displacement and fault length, the approximate age of active faults can be estimated. The lower limit of estimated active fault age is expressed with maximum cumulative displacement, earthquake slip and recurrence interval as T ? (d_max /u) · I(M).     

On the Effects of Non-planar Geometry for Blind Thrust Faults on Strong Ground Motion

— We quantify the effects of complex fault geometry on low-frequency (<1 Hz) strong ground motion using numerical modeling of dynamic rupture. Our tests include the computation of synthetic seismograms for several simple rupture scenarios with planar and curved fault approximations of the 1994 Northridge earthquake. We use the boundary integral equation method (BIEM) to compute the dynamic rupture process, which includes the normal stress effects along the curved fault geometries. The wave propagation and computation of synthetic seismograms are modeled using a fourth-order finite-difference method (FDM). The near-field ground motion is significantly affected by the acceleration, deceleration and arrest of rupture due to the curvature of the faults, as well as the variation in directivity of the rupture. For example, a 6-km-long hanging-wall or footwall splay with a maximum offset of 1 km can change 1-Hz peak velocities by up to a factor of 2-3 near the fault. Our tests suggest that the differences in waveform are larger on the hanging wall compared to those on the footwall, although the differences in amplitude are larger in the forward rupture direction (footwall). The results imply that kinematic ground motion estimates may be biased by the omission of dynamic rupture effects and even relatively gentle variation in fault geometry, and even for long-period waves.     

Optimal design of viscoelastic dampers using eigenvalue assignment

In this study a procedure for determining the optimum size and location of viscoelastic dampers is proposed using the eigenvalue assignment technique. Natural frequencies and modal damping ratios, required to realize a given target response, are determined first by the convex model. Then the desired dynamic structural properties are realized by optimally distributing the damping and stiffness coefficients of viscoelastic dampers using non‐linear programming based on the gradient of eigenvalues. This optimization method provides information on the optimal location as well as the magnitude of the damper parameters. The proposed procedure is applied to the retrofit of a 10‐story shear frame, and to a three‐dimensional structure with an asymmetric plan. The analysis results confirm that the responses of model structures retrofitted by the proposed method correspond well with the given target response. Copyright © 2003 John Wiley & Sons, Ltd.     

潍坊"5.19"强对流天气过程分析

利用常规气象资料、T213实况分析资料、全国雷达拼图资料、济南多普勒雷达和潍坊本市雷达资料及自动站资料，对2003年5月19日一次强对流天气过程进行分析，结果表明，快速东移南下的横槽极其槽后的冷空气使不稳定层结加强，是触发此次对流发生的原因。而低层暖湿气流的存在为其发展提供了必要的动力和水汽条件。