Two modes of climatic control in the Holocene stalagmite record from the Japan Sea side of the Japanese islands

The Holocene stalagmite FG01 collected at the Fukugaguchi Cave in Itoigawa, central Japan provides a unique high‐resolution record of the East Asian winter monsoon. Because of the climate conditions on the Japan Sea side of the Japanese islands, the volume of precipitation during the winter is strongly reflected in the stalagmite δ¹⁸O signal. Examination of the carbon isotopes and the Mg/Ca ratio of FG01 provided additional information on the Holocene climate in Itoigawa, which is characterized by two different modes separated at 6.4 ka. Dripwater composition and the correlation between the δ¹³C and Mg/Ca data of FG01 indicate the importance of prior calcite precipitation (PCP), a process that selectively eliminated ¹²C and calcium ions from infiltrating water from CO₂ degassing and calcite precipitation. In an earlier period (10.0–6.4 ka), an increase in soil pCO₂ associated with warming and wetting climate trends was a critical factor that enhanced PCP, and resulted in an increasing trend in the Mg/Ca and δ¹³C data and a negative correlation between the δ¹³C and δ¹⁸O profiles. A distinct peak in the δ¹³C age profile at 6.8 ka could be a response to an increase of approximately 10% in C4 plants in the recharge area. At 6.4 ka, the climate mode changed to another, and correlation between δ¹⁸O and δ¹³C became positive. In addition, a millennial‐scale variation in δ¹⁸O and pulsed changes in δ¹³C and Mg/Ca became distinct. Assuming that δ¹⁸O and PCP were controlled by moisture in the later period, the volume of precipitation was high during 6.0–5.2, 4.4–4.0, and 3.0–2.0 ka. In contrast, the driest interval in Itoigawa was during 0.2–0.4 ka, and broadly corresponds to the Little Ice Age.     

Constraining tephra dispersion and deposition from three subplinian explosions in 2011 at Shinmoedake volcano,Kyushu, Japan

Constraining physical parameters of tephra dispersion and deposition from explosive volcanic eruptions is a significant challenge, because of both the complexity of the relationship between tephra distribution and distance from the vent and the difficulties associated with direct and comprehensive real-time observations. Three andesitic subplinian explosions in January 2011 at Shinmoedake volcano, Japan, are used as a case study to validate selected empirical and theoretical models using observations and field data. Tephra volumes are estimated using relationships between dispersal area and tephra thickness or mass/area. A new cubic B-spline interpolation method is also examined. Magma discharge rate is estimated using theoretical plume models incorporating the effect of wind. Results are consistent with observed plume heights (6.4–7.3 km above the vent) and eruption durations. Estimated tephra volumes were 15–34?×?10⁶ m³ for explosions on the afternoon of 26 January and morning of 27 January, and 5.0–7.6?×?10⁶ m³ for the afternoon of 27 January; magma discharge rates were in the range 1–2?×?10⁶ kg/s for all three explosions. Clast dispersal models estimated plume height at 7.1?±?1 km above the vent for each explosion. The three subplinian explosions occurred with approximately 12-h reposes and had similar mass discharge rates and plume heights but decreasing erupted magma volumes and durations.     

Diffuse volcanic degassing and thermal energy release from Hengill volcanic system, Iceland

We report the first detailed study of spatial variations on the diffuse emission of carbon dioxide (CO₂) and hydrogen sulfide (H₂S) from Hengill volcanic system, Iceland. Soil CO₂ and H₂S efflux measurements were performed at 752 sampling sites and ranged from nondetectable to 17,666 and 722?g?m^?2?day^?1, respectively. The soil temperature was measured at each sampling site and used to evaluate the heat flow. The chemical composition of soil gases sampled at selected sampling sites during this study shows they result from a mixing process between deep volcanic/hydrothermal component and air. Most of the diffuse CO₂ degassing is observed close to areas where active thermal manifestations occur, northeast flank of the Hengill central volcano close to the Nesjavellir power plant, suggesting a diffuse degassing structure with a SSW?CNNE trend, overlapping main fissure zone and indicating a structural control of the degassing process. On the other hand, H₂S efflux values are in general very low or negligible along the study area, except those observed at the northeast flank of the Hengill central volcano, where anomalously high CO₂ efflux and soil temperatures were also measured. The total diffuse CO₂ emission estimated for this volcanic system was about 1,526?±?160?t?day^?1 of which 453?t?day^?1 (29.7?%) are of volcanic/hydrothermal origin. To calculate the steam discharge associated with the volcanic/hydrothermal CO₂ output, we used the average H₂O/CO₂ mass ratio from 12 fumarole samples equal to 88.6 (range, 9.4?C240.2) as a representative value of the H₂O/CO₂ mass ratios for Hengill fumarole steam. The resulting estimate of the steam flow associated with the gas flux is equal to 40,154?t?day^?1. The condensation of this steam results in thermal energy release for Helgill volcanic system of 1.07?×?10¹⁴?J?day^?1 or to a total heat flow of 1,237?MW_t.     

Cyclic tests on a hybrid coupled wall utilizing a rocking mechanism

A new type of hybrid coupled wall system, consisting of rolled steel coupling beams, reinforced concrete (RC) wall piers, and concrete‐filled tube (CFT) short columns, is introduced. In this new system, the bases of the wall piers are connected to the base beams only through CFT short columns, unlike conventional coupled walls. Yield occurs in the coupling beams and the short columns; hence, in the RC wall piers, only minimum cracking appears. A total of four subassembly specimens, designed to fail in various collapse mechanisms, were cyclically loaded under constant axial force. A benchmark specimen showed ductile behavior with large energy dissipation until fracture occurred in the coupling beam. In the specimen designed to fail in shear in its CFT, substantial axial shortening was observed, but the overall behavior was ductile. Behavior of specimens with small amounts of section steel in the wall panel fringe, or with thin wall panels, also showed ductile behavior, but the strength and energy dissipation were significantly smaller than other two specimens. An analytical model was proposed for a frame analysis program using fiber elements to simulate elastic–plastic behavior of the system. Design methods to prevent shear failure of CFT and RC panels are suggested using the analytical and test results. Copyright © 2008 John Wiley & Sons, Ltd.     

Mineralogical and Geochemical Characteristics of the Utanobori Gold Deposit in Northern Hokkaido,Japan

The Utanobori gold deposit is a low‐sulfidation, epithermal vein‐type deposit located in northern Hokkaido, Japan. The deposit is hosted by conglomerate, sandstone, and tuff of the Middle to Late Miocene Esashi Formation. These rocks were hydrothermally altered. Silica sinters and quartz‐adularia veins are common in the deposit. The quartz‐adularia veins either contain a ginguro band, which corresponds to the main gold‐bearing vein (Type 1 Veins), or do not contain a ginguro band but contain minor adularia (Type 2 Veins). Type 1 Veins are divided into three stages with 12–14 substages. Ore minerals identified include electrum, naumannite, chlorargyrite, bromargyrite, an unidentified Fe‐Sb mineral, and an Fe‐(Sb)‐As mineral. These ore minerals formed in the main mineralization stages I (bands I‐b and I‐d) and II (band II‐a). Scanning electron microscopy with cathodoluminescence images show that cathodoluminescence‐dark microcrystalline quartz exhibiting colloform (ghost‐sphere) texture is closely associated with ore minerals in the Type 1 Vein and Type 2 Vein, and the Al and K contents of such quartz are commonly >1000 ppm. This indicates that the ore minerals were crystallized from alkaline, silica‐saturated fluids at temperatures <200°C, which initially deposited amorphous silica that was recrystallized to microcrystalline quartz. The average Au content of electrum is 52.5 at% Au (n = 10), 65.7 at% Au (n = 20), and 55.5 at% Au (n = 5) in bands I‐b, I‐d, and II‐a, respectively, of Type 1 Veins. The δ³⁴S_CDT values of two fine‐grained disseminated pyrites in the altered conglomerate and bedded tuff in the argillic altered zone are ?4.3 and ?4.2‰. Ar‐Ar dating on adularia yielded 13.6 ± 0.06 Ma, 13.6 ± 0.07 Ma, and 13.6 ± 0.06 Ma for the stages I, II, and III of the Type 1 Vein, respectively. K‐Ar ages determined on adularia in the silica sinter and on whole‐rock of glassy rhyolite of the Esashi Formation are 15.0 ± 0.4 Ma and 14.6 ± 0.4 Ma, respectively. These radiometric ages indicate that silica sinter associated with the rhyolitic volcanic rocks formed prior to the main gold mineralization.     

Experiment and simulation of turbulent flow in local scour around a spur dyke

The turbulent flow in the local scour hole around a single non-submerged spur dyke is investigated with both experimental and numerical methods. The experiments are conducted under clear-water scour regime with an impermeable spur dyke. The scour geometry and flow velocities are measured in details with a high-resolution laser displacement meter, electro-magnetic velocimetries and PIV （Particle image velocimetry）. A 3D non-linear k-ε model is developed to simulate the complex local flow field around the scour area. The numerical model is formulated using FVM （Finite volume method） on a collocated unstructured mesh, capable of resolving complex geometries and boundaries. It is found that the simulation results are reasonably consistent with those of the experimental measurements. Based on the study results, the nature of the flow structure around a spur dyke with local scour hole is analyzed.     

Electrical conductivities of pyrolitic mantle and MORB materials up to the lowermost mantle conditions

The electrical conductivities of natural pyrolitic mantle and MORB materials were measured at high pressure and temperature covering the entire lower mantle conditions up to 133 GPa and 2650 K. In contrast to the previous laboratory-based models, our data demonstrate that the conductivity of pyrolite does not increase monotonically but varies dramatically with depth in the lower mantle; it drops due to high-spin to low-spin transition of iron in both perovskite and ferropericlase in the mid-lower mantle and increases sharply across the perovskite to post-perovskite phase transition at the D″ layer. We also found that the MORB exhibits much higher conductivity than pyrolite. The depth–conductivity profile measured for pyrolite does not match the geomagnetic field data below about 1500-km depth, possibly suggesting the existence of large quantities of subducted MORB crust in the deep lower mantle. The observations of geomagnetic jerks suggest that the electrical conductivity may be laterally heterogeneous in the lowermost mantle with high anomaly underneath Africa and the Pacific, the same regions as large low shear-wave velocity provinces. Such conductivity and shear-wave speed anomalies are also possibly caused by the deep subduction and accumulation of dense MORB crust above the core–mantle boundary.     

Sedimentological features of Cretaceous--Tertiary (K/T) boundary section along Heilongjiang River,Northeast China

The Jiayin area along the Heilongjiang River in Northeast China has attracted stratigraphic and sedimentological interests recently because the Cretaceous--Tertiary (K/T) boundary should be located in this non-marine succession.Dinosaur remains disappear suddenly at the upper part of the Maastrichtian,whereas plants gradually evolved throughout the succession.Analysis of sedimentary facies has been carried out and paleo-environments through Upper Cretaceous to lower Paleocene sections are reconstructed.Fluvial to lacustrine sedimentary environments are inferred from the facies.Several debris flow events have been identified,and it is in these deposits that the dinosaur fossils are concentrated.     

Depositional Age of a Fossil Whale Bone from São Paulo Ridge,South Atlantic Ocean,Based on Os Isotope Stratigraphy of a Ferromanganese Crust

Whale carcasses (whale falls) deposited on the deep seafloor are associated with a distinctive biotic community. A fossil whale bone recovered from São Paulo Ridge, South Atlantic Ocean, during cruise YK13–04 Leg 1 of R/V Yokosuka was covered by a ferromanganese (Fe–Mn) crust approximately 9 mm thick. Here, we report an age constraint for this fossil bone on the basis of Os isotopic stratigraphy (¹⁸⁷Os/¹⁸⁸Os ratio) of the Fe–Mn crust. Major‐ and trace‐element compositions of the crust are similar to those of Fe–Mn crusts of predominantly hydrogenous origin. Rare earth element concentrations in samples of the crust, normalized with respect to Post‐Archean average Australian Shale, exhibit flat patterns with positive Ce and negative Y anomalies. These results indicate that the Fe–Mn crust consists predominantly of hydrogenous components and that it preserves the Os isotope composition of seawater at the time of its deposition. ¹⁸⁷Os/¹⁸⁸Os ratios of three Fe–Mn crust samples increased from 0.904 to 1.068 in ascending stratigraphic order. The value of 1.068 from the surface slice (0–3 mm depth in the crust) was identical to that of present‐day seawater within error (~1.06). The value of 0.904 from the basal slice (6–9 mm) equaled seawater values from ca. 4–5 Ma. Because it is unknown how long the bone lay on the seafloor before the Fe–Mn crust was deposited, the Os stratigraphic age of ca. 5 Ma is a minimum age of the fossil. This is the first application, to our knowledge, of marine Os isotope stratigraphy for determining the age of a fossil whale bone. Such data may offer valuable insights into the evolution of the whale‐fall biotic community.