Tsunami damage to coastal defences and buildings in the March 11th 2011 M w 9.0 Great East Japan earthquake and tsunami

On March 11th 2011 a M _w 9.0 mega-thrust interface subduction earthquake, the Great East Japan Earthquake, occurred 130 km off the northeast coast of Japan in the Pacific Ocean at the Japan Trench, triggering tsunami which caused damage along 600 km of coastline. Observations of damage to buildings (including vertical evacuation facilities) and coastal defences in Tōhoku are presented following investigation by the Earthquake Engineering Field Investigation Team (EEFIT) at 10 locations in Iwate and Miyagi Prefectures. Observations are presented in the context of the coastal setting and tsunami characteristics experienced at each location. Damage surveys were carried out in Kamaishi City and Kesennuma City using a damage scale for reinforced concrete (RC), timber and steel frame buildings adapted from an earlier EEFIT tsunami damage scale. Observations show that many sea walls and breakwaters were overtopped, overturned, or broken up, but provided some degree of protection. We show the extreme variability of damage in a local area due to inundation depth, flow direction, velocity variations and sheltering. Survival of many RC shear wall structures shows their high potential to withstand local earthquake and significant tsunami inundation but further research is required into mitigation of scour, liquefaction, debris impact, and the prevention of overturning failure. Damage to steel and timber buildings are also discussed. These observations are intended to contribute to mitigation of future earthquake and tsunami damage by highlighting the key features which influence damage level and local variability of damage sustained by urban coastal infrastructure when subjected to extreme tsunami inundation depths.     

Short time scales of magma-mixing processes prior to the 2011 eruption of Shinmoedake volcano, Kirishima volcanic group, Japan

We estimated time scales of magma-mixing processes just prior to the 2011 sub-Plinian eruptions of Shinmoedake volcano to investigate the mechanisms of the triggering processes of these eruptions. The sequence of these eruptions serves as an ideal example to investigate eruption mechanisms because the available geophysical and petrological observations can be combined for interpretation of magmatic processes. The eruptive products were mainly phenocryst-rich (28 vol%) andesitic pumice (SiO₂ 57 wt%) with a small amount of more silicic pumice (SiO₂ 62–63 wt%) and banded pumice. These pumices were formed by mixing of low-temperature mushy silicic magma (dacite) and high-temperature mafic magma (basalt or basaltic andesite). We calculated the time scales on the basis of zoning analysis of magnetite phenocrysts and diffusion calculations, and we compared the derived time scales with those of volcanic inflation/deflation observations. The magnetite data revealed that a significant mixing process (mixing I) occurred 0.4 to 3 days before the eruptions (pre-eruptive mixing) and likely triggered the eruptions. This mixing process was not accompanied by significant crustal deformation, indicating that the process was not accompanied by a significant change in volume of the magma chamber. We propose magmatic overturn or melt accumulation within the magma chamber as a possible process. A subordinate mixing process (mixing II) also occurred only several hours before the eruptions, likely during magma ascent (syn-eruptive mixing). However, we interpret mafic injection to have begun more than several tens of days prior to mixing I, likely occurring with the beginning of the inflation (December 2009). The injection did not instantaneously cause an eruption but could have resulted in stable stratified magma layers to form a hybrid andesitic magma (mobile layer). This hybrid andesite then formed the main eruptive component of the 2011 eruptions of Shinmoedake.     

Performance of dry-separation processes in the recovery of cenospheres from fly ash and their implementation in a recovery unit

Cenospheres recovery is one of the coal fly ash beneficiations, providing economic as well as environmental benefits. Current techniques, such as lagoon or other wet-separation processes, consume large amounts of water and add to water pollution due to leaching of toxic materials from fly ash. The other possible disadvantage is the need for a wide operational area, which is unsuitable for densely populated countries. As wet-separation processes have some disadvantages, an improved and/or sustainable alternative recovery technique is required. An air classifier is one of the alternative techniques. In this study, two types of air classifiers, namely a closed-type pneumatic separator and a micron separator, have been investigated. In terms of separation efficiency, it was found that the micron separator has the potential to be applied in cenospheres recovery from coal fly ash, giving a Newton's efficiency of 0.44, as compared to a value of about 0.26 for the closed-type pneumatic separator. The cenospheres recoveries of both pieces of equipment at their optimum Newton's efficiencies were similar at over 60 wt.%. The separation performance was further assessed from the particle distributions of the overflow and underflow products obtained from both pieces of equipment, as well as from SEM images. It was found that the lower Newton's efficiency of the closed-type pneumatic separator was due to the re-concentration of fine particles in the underflow product at air-flow rates higher than 2.2 m/s (the underflow product yield was about 55 wt.%).In order to further confirm the applicability of this technique, the micron separator, which had provided higher separation efficiency and cenospheres recovery, was deployed in a cenospheres recovery unit prior to the use of a wet-separation process (float and sink tank). About 80% of the cenospheres was recovered, with an 87.8% reduction in the total mass of fly ash to be separated in the float and sink tank. Consequently, much less water was needed for the process of cenospheres recovery. Moreover, it was also confirmed that the micron separator could yield higher quality fly ashes, that is, fly ash types I and II, from lower feed quality of fly ash type IV, which is the lowest category in commercial classification of fly ash according to JIS A6201.     

Empirical ocean-color algorithms to retrieve chlorophyll-a, total suspended matter, and colored dissolved organic matter absorption coefficient in the Yellow and East China Seas

A bio-optical dataset collected during the 1998?C2007 period in the Yellow and East China Seas (YECS) was used to provide alternative empirical ocean-color algorithms in the retrieval of chlorophyll-a (Chl-a), total suspended matter (TSM), and colored dissolved organic matter (CDOM) absorption coefficients at 440 nm (ag₄₄₀). Assuming that remote-sensing reflectance (Rrs) could be retrieved accurately, empirical algorithms for T_Chl (regionally tuned Tassan??s Chl-a algorithm) in case-1 waters (T_Chl2i in case-2 waters), T_TSM (regionally tuned Tassan??s TSM algorithm), and T_ag440 or C_ag440 (regionally tuned Tassan??s or Carder??s ag₄₄₀ algorithm) were able to retrieve Chl-a, TSM, and ag₄₄₀ with uncertainties as high as 35, 46, and 35%, respectively. Applying the standard SeaWiFS Rrs, T_Chl was not viable in the eastern part of the YECS, which was associated with an inaccurate SeaWiFS Rrs retrieval because of improper atmospheric correction. T_Chl behaved better than other algorithms in the turbid case-2 waters, although overestimation was still observed. To retrieve more reliable Chl-a estimates with standard SeaWiFS Rrs in turbid water (a proxy for case-2 waters), we modified T_Chl for data with SeaWiFS normalized water-leaving radiance at 555 nm (nLw₅₅₅) > 2 mW cm^?2 ??m^?1 sr^?1 (T_Chl2s). Finally, with standard SeaWiFS Rrs, we recommend switching algorithms from T_Chl2s (for case-2 waters) to MOC_Chl (SeaWiFS-modified NASA OC4v4 standard algorithm for case-1 waters) for retrieving Chl-a, which resulted in uncertainties as high as 49%. To retrieve TSM and ag₄₄₀ using SeaWiFS Rrs, we recommend empirical algorithms for T_TSM (pre-SeaWiFS-modified form) and MT_ag440 or MC_ag440 (SeaWiFS Rrs-modified forms of T_ag440 or C_ag440). These could retrieve with uncertainties as high as 82 and 52%, respectively.     

Modelling the impact of a hypothetical sub-Plinian eruption at La Soufrière of Guadeloupe (Lesser Antilles)

This paper describes the development and application of an impact model for a future hypothetical sub-Plinian eruption of La Soufrière of Guadeloupe. The model was designed to assess the impact from either a single or multiple eruption scenarios, each defined in terms of a map of the intensity of three volcanic hazards; volcanogenic earthquake, tephra fallout and pyroclastic density currents. The impact from the three hazards can be assessed independently or alternatively the joint impact of the three hazards can be assessed. The outputs that are produced from the model are; the number of buildings with collapsed roofs, and the number of fatal and non-fatal casualties.     

Rapid evolution of the Eocene accretionary complex (Hyuga Group) of the Shimanto terrane in southeastern Kyushu, southwestern Japan

Abstract   Detailed geologic examination of the Eocene accretionary complex (Hyuga Group) of the Shimanto terrane in southeastern Kyushu revealed that the oceanic plate was composed of Paleocene to Lower Eocene mudstone and siliceous mudstone, lower Middle Eocene red mudstone, and mid-Middle Eocene trench-fill turbidite with siltstone breccia, successively overlying the pre-Eocene oceanic plate. This oceanic plate sequence was overlain by Upper Eocene siltstone. Deposition of the lower Middle Eocene red mudstone was accompanied by basalt flows and it is interbedded with continental felsic tuff, which indicates that the basalt and red mudstone were deposited near the trench just before accretion. The Hyuga Group has very similar geological structure to that of the chert–clastic complexes found in the Jurassic accretionary complexes in Japan: that is, a decollement fault formed in the middle of an oceanic plate sequence, and an imbricate structure formed only in the upper part of the sequence. Thus, it appears that the Hyuga Group was formed by the same accretionary process as the Jurassic accretionary complexes. No accretion occurred before the Middle Eocene, and the rapid accretion of the Hyuga Group was commenced by the supply of coarse terrigenous sediments in the mid-Middle Eocene, when the direction of movement of the Pacific Plate changed. The pre-Eocene oceanic basement and lower Middle Eocene volcanic activity suggest that the oceanic plate partly preserved in the Hyuga Group was very similar to the northern part of the present West Philippine Sea Plate.     

A study on three-dimensional structures of the ionospheric dynamo currents induced by the neutral winds simulated by the Kyushu-GCM

Three-dimensional structures of the ionospheric dynamo currents are examined using the neutral winds in a general circulation model of the middle atmosphere at Kyushu University. A quasi-three-dimensional ionospheric dynamo model is constructed assuming an infinite parallel conductivity in the ionosphere. This model is able to simulate both the equatorial electrojet and the global Sq current system successfully. The simulated results reveal that the equatorial electrojet is confined in quite narrow latitudes around the equator accompanied with meridional current circulations and satisfies a non-divergent structure mainly within the E region. A vertically stratified double layered structure is seen in the east–west current density near the focus latitude of the global Sq current system. It is shown that the stratified structure mainly consists of the east–west Hall current associated with the eastward wind of zonal wavenumbers 1 and 2 in the lower altitudes and the westward wind of zonal wavenumber 2 in the upper altitudes. The day-to-day variation of the neutral winds can significantly vary the induced ionospheric dynamo current system, which is recognized as changes of the focus latitude and/or the maximum value of the equatorial electrojet.     

Titanium- and water-rich metamorphic olivine in high-pressure serpentinites from the Voltri Massif (Ligurian Alps,Italy): evidence for deep subduction of high-field strength and fluid-mobile elements

Titanium- and water-rich metamorphic olivine (Fo 86–88) is reported from partially dehydrated serpentinites from the Voltri complex, Ligurian Alps. The rocks are composed of mostly antigorite and olivine in addition to magnetite, chlorite, clinopyroxene and Ti-clinohumite. In situ secondary ion mass spectrometry (SIMS) data show that metamorphic olivine has very high and strongly correlated H₂O (up to 0.7 wt%) and TiO₂ contents (up to 0.85 wt%). Ti-rich olivine shows colourless to yellow pleochroism. Olivine associated with Ti-clinohumite contains low Ti, suggesting that Ti-rich olivine is not the breakdown product of Ti-clinohumite. Fourier transform infrared spectroscopy (FTIR) absorption spectra show peaks of serpentine, Ti-clinohumite and OH-related Si vacancies. Combining FTIR and SIMS data, we suggest the presence of clustered planar defects or nanoscale exsolutions of Ti-clinohumite in olivine. These defects or exsolutions contain more H₂O (x ~ 0.1 in the formula 4Mg₂SiO₄·(1?x)Mg(OH,F)₂·xTiO₂) than Ti-clinohumite in the sample matrix (x = 0.34–0.46). In addition to TiO₂ and H₂O, secondary olivine contains significant Li (2–60 ppm), B (10–20 ppm), F (10–130 ppm) and Zr (0.9–2.1 ppm). It is enriched in ¹¹B (δ¹¹B = +17 to +23 ‰). Our data indicate that secondary olivine may play a significant role in transporting water, high-field strength and fluid-mobile elements into the deeper mantle as well as introduce significant B isotope anomalies. Release of hydrogen from H₂O-rich olivine subducted into the deep mantle may result in strongly reduced mantle domains.     

Variability of surface characteristics and energy flux patterns of sunn hemp (Crotalaria juncea L.) under well-watered conditions

There is not much information in the literature about the energy partitioning and micrometeorological features of sunn hemp. Therefore, in this study, the variations in the energy-balance components and plant characteristics such as aerodynamic and surface conductance, crop coefficient, albedo, short- and long wave down- and upward radiation have been measured and estimated for the time period from August to October 2004 over an irrigated sand field at the Arid Land Research Center in Tottori, Japan. The Bowen ratio energy-balance method was used to calculate the partitioning of heat fluxes of sunn hemp. The Bowen ratio values at the first growing stages in August were found to be higher than the Bowen ratio values at the latest growing stages in September and October because of the heavy rain and high soil-water content. The daytime averaged Bowen ratio was 0.19. During the measurement period, the daytime average net radiation, and soil, latent and sensible heat fluxes were approximately 231, 28, 164, and 39 W m^–2, respectively. The net radiation and soil heat flux showed decreasing trends from the beginning to the end of the experiment period due to the atmospheric and crop growth conditions. The daytime averages of aerodynamic and surface conductance for sunn hemp were around 31 and 17 mm s^–1, respectively. Also, the daytime average albedo of sunn hemp was around 19%. Finally, the high precipitation amount due to typhoons, high soil-water content, low available energy and low vapor-pressure deficit lead to decreasing trend of the energy fluxes during the generative phase of sunn hemp.     

长江口沉积物210Pb分布及沉积环境解释

在长江河口潮滩、分流河道和水下三角洲共获得18个柱样,进行沉积学分析和210Pb测定,并对其中6根柱样进行137Cs测定。经研究发现,长江口外在水深25～30m,122°30′N,31°00′E附近存在一个泥质沉积中心,沉积速率达2.0～6.3cm/yr。另外,在潮滩和涨潮槽也获得较高沉积速率,其中南汇和横沙岛潮滩沉积速率(1.03～1.94cm/yr)高于崇明东滩(0.51～0.76cm/yr),涨潮槽沉积速率也达0.86cm/yr。此外,在石洞口、南汇、九段沙潮滩和三角洲前缘有部分柱样未获沉积速率,推测为沉积环境不稳定或沉积速率过快所致。