Sedimentary records of multidecadal-scale variability of diatom productivity in the Bungo Channel, Japan, associated with the Pacific Decadal Oscillation

In order to examine the responses of primary productivity in the southern coastal sea of Japan to the Pacific Decadal Oscillation (PDO) in the 20th century, sedimentary records of diatom productivity (diatom valve fluxes) were reconstructed using core samples from the Bungo Channel (BC) in southwest Japan. The record of the Thalassionema spp. flux—the best index of fall primary productivity in the BC—indicated a multidecadal-scale duration with a low flux (1943–1982) and those with a high flux (1913–1943 and 1982–2001); apparent shifts were recognized in 1943 and 1982. The shift in 1982 was also recognized in the flux records of other early summer to fall predominant genera in the BC and, previously, in the biogenic silica records from a broad region of the southeast BC. This indicates that in our records, this shift reflects a general trend in the primary production in the southeast BC. A comparison among the Thalassionema spp. flux records, meteorological data from an observatory adjacent to the core site, and the PDO index showed that the flux records were more similar to the PDO index than the other meteorological records, which suggests that the multidecadal-scale variability of the BC primary productivity may be associated with some marine-derived forcing. The bottom intrusions of nutrient-rich water that upwelled from the shelf slope into the BC, the axis movement or the transport of the Kuroshio Current off the BC, and a basin-scale wind stress in the North Pacific might play an important role in this forcing and mediate between the BC primary productivity and the PDO.     

Unquenchable high-pressure perovskite polymorphs of MnSnO3 and FeTiO3

New high-pressure orthorhombic (GdFeO₃-type) perovskite polymorphs of MnSnO₃ and FeTiO₃ have been observed using in situ powder X-ray diffraction in a diamond-anvil cell with synchrotron radiation. The materials are produced by the compression of the lithium niobate polymorphs of MnSnO₃ and FeTiO₃ at room temperature. The lithium niobate to perovskite transition occurs reversibly at 7 GPa in MnSnO₃, with a volume change of -1.5%, and at 16 GPa in FeTiO₃, with a volume change of -2.8%. Both transitions show hysteresis at room temperature. For MnSnO₃ perovskite at 7.35 (8) GPa, the orthorhombic cell parameters are a=5.301 (2) A, b=5.445 (2) Å, c=7.690 (8) Å and V= 221.99 (15) ų. Volume compression data were collected between 7 and 20 GPa. The bulk modulus calculated from the compression data is 257 (18) GPa in this pressure region. For FeTiO₃ perovskite at 18.0 (5) GPa, cell parameters are a=5.022 (6) Å, b=5.169 (5) Å, c=7.239 (9) Å and V= 187.94 (36) ų. Based on published data on the quench phases, the FeTiO₃ perovskite breaks down to a rocksalt + baddelyite mixture of FeO and TiO₂ at 23 GPa. This is the first experimental verification of the pressure-induced breakdown of a perovskite to simple oxides.     

Reconstruction of pollution history of organic contaminants in the upper Gulf of Thailand by using sediment cores: first report from Tropical Asia Core (TACO) project

This paper reports the first reconstruction of a pollution history in tropical Asia from sediment cores. Four sediment core samples were collected from an offshore transect in the upper Gulf of Thailand and were analyzed for organic micropollutants. The cores were dated by measurement of (137)Cs and geochronometric molecular markers (linear alkylbenzenes, LABs; and tetrapropylene-type alkylbenzenes, TABs). Polychlorinated biphenyl (PCB) concentrations showed a subsurface maximum in layers corresponding to the 1970s, indicating the effectiveness of regulation of PCBs in Thailand. LAB concentrations increased over time, indicating the increase in input of sewage into the Gulf during the last 30 years. Hopanes, biomarkers of petroleum pollution, also increased over time, indicating that the inputs of automobile-derived hydrocarbons to the coastal zone has been increasing owing to the increased number of cars in Thailand since the 1950s. Polycyclic aromatic hydrocarbons (PAHs) increased in the layers corresponding to the 1950s and 1960s, probably because of the increased inputs of automobile-derived PAHs. PAH concentrations in the upper layers corresponding to the 1970s and later remained constant or increased. The absence of a subsurface maximum of PAHs contrasts with results observed in industrialized countries. This can be explained by the facts that the Thai economy did not depend on coal as an energy source in the 1960s and that economic growth has continued since the 1970s to the present. The deposition flux of PAHs and hopanes showed a dramatic offshore decrease, whereas that of LABs was uniform.     

BSRs and Associated Reflections as an Indicator of Gas Hydrate and Free Gas Accumulation: An Example of Accretionary Prism and Forearc Basin System along the Nankai Trough, off Central Japan

Abstract. Multi-channel seismic data obtained from the Nankai accretionary prism and forearc basin system has been studied to elucidate the migration and accumulation process of gas to the BGHS and examine the distribution pattern of BSRs and characteristic reflections associated with them.
BSRs are distributed widely in the Nankai accretionary prism and associated forearc basins (33,000 km²) and 90 % of them have migration and recycling origins. The widest distribution of the BSRs can be seen at the prism. A correlation between the BSR distributions and prism size shows that the BSRs tend to be more well-developed in a prism of large size. This suggests that a large prism may produce much amount of gas-bearing fluids that migrate to the BGHS and form the BSRs (tectonic control), hi the forearc basins, the BSRs are identified at topographic highs, anticlines and basin margins (structural control).
The upward migration of gas-bearing fluids is carried out through permeable sand layers and as a result, the distribution of BSRs is confined to alternating beds of sand and mud facies (sedimentary control). However, if there is enough time for upward migration and accumulation of gas to the BGHS, the BSRs can be generated widely in low-permeable mud facies (time control).
Those results imply that structural, tectonic, sedimentary and time controls are primary factors to decide the distribution of BSRs in the Nankai Trough area.     

Experimental Study of Fe-Mg Exchange Reaction Between Orthopyroxene and Sapphirine and its Calibration as a Geothermometer

The exchange of Fe²⁺ and Mg²⁺ between orthopyroxene and sapphirine has been investigated at pressures 7-16 kbar and temperatures 850-1300°C using a piston cylinder apparatus for the synthetic and natural systems. This reaction is temperature-dependent and would be a good geothermometer. The equilibration temperature T is approximately expressed by the distribution coefficient as follows: T(°C)=1515/(ln K_D+0.943)-273.

This empirical equation was applied to some Antarctic granulites and associated rocks. The new orthopyroxene-sapphirine geothermometer gives consistent results with those estimated from the Fe-Mg orthopyroxene-garnet geothermometer.     

Phase transition in CaSiO3 perovskite

A phase transition in pure CaSiO₃ perovskite was investigated at 27 to 72 GPa and 300 to 819 K by in-situ X-ray diffraction experiments in an externally-heated diamond-anvil cell. The results show that CaSiO₃ perovskite takes a tetragonal form at 300 K and undergoes phase transition to a cubic structure above 490–580 K in a pressure range studied here. The transition boundary is strongly temperature-dependent with a slightly positive dT / dP slope of 1.1 (± 1.3) K/GPa. It is known that the transition temperature depends on Al₂O₃ content dissolved in CaSiO₃ perovskite [Kurashina et al., Phys. Earth Planet. Inter. 145 (2004) 67–74]. The phase transition in CaSiO₃(+ 3 wt.% Al₂O₃) perovskite therefore could occur in a cold subducted mid-oceanic ridge basalt (MORB) crust at about 1200 K in the upper- to mid-lower mantle. This phase transition is possibly ferroelastic-type and may cause large seismic anomalies in a wide depth range.     

High-pressure behavior of MnGeO3 and CdGeO3 perovskites and the post-perovskite phase transition

The stability and high-pressure behavior of perovskite structure in MnGeO₃ and CdGeO₃ were examined on the basis of in situ synchrotron X-ray diffraction measurements at high pressure and temperature in a laser-heated diamond-anvil cell. Results demonstrate that the structural distortion of orthorhombic MnGeO₃ perovskite is enhanced with increasing pressure and it undergoes phase transition to a CaIrO₃-type post-perovskite structure above 60 GPa at 1,800 K. A molar volume of the post-perovskite phase is smaller by 1.6% than that of perovskite at equivalent pressure. In contrast, the structure of CdGeO₃ perovskite becomes less distorted from the ideal cubic perovskite structure with increasing pressure, and it is stable even at 110 GPa and 2,000 K. These results suggest that the phase transition to post-perovskite is induced by a large distortion of perovskite structure with increasing pressure.     

Specific accumulation and temporal trends of organochlorine contaminants in Dall's porpoises (Phocoenoides dalli) from Japanese coastal waters

Organochlorine compounds (OCs) such as polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroethane and its metabolites (DDTs), chlordane related compounds, hexachlorocyclohexane isomers (HCHs), hexachlorobenzene (HCB), tris(4-chlorophenyl) methane (TCPMe) and tris(4-chlorophenyl) methanol were determined in the blubber of Dall's porpoises (Phocoenoides dalli) collected from Japanese coastal waters in 1998/1999. Among OCs analyzed, PCBs were the predominant contaminants with concentrations ranging from 1.5 to 39 microg/g on a wet weight basis. OCs concentrations were relatively low and less variable in mature females possibly due to the lactational excretion from their bodies, while in males the concentrations were increased with body length. Concentrations and compositions of DDTs and HCHs showed significant differences between the truei-type population off the Pacific coast of northern Japan and dalli-type from the Sea of Japan/Okhotsk, suggesting its usefulness to discriminate different populations. OCs levels detected in truei-type porpoises collected in 1998/1999 were lower than those collected in 1984, except TCPMe. On the other hand, except DDTs, the residue levels of other organochlorines in dalli-type porpoises showed no significant decrease since 1984.