仿生高效切削齿试验研究

在仿生高效耐磨理论的指导下,以鼹鼠爪趾为仿生原型,引入了其经长期进化而具有的高效、耐磨的特性。选用CVD多晶金刚石为切削齿的切削单元,采用真空热压烧结工艺制备仿生高效切削齿,并将其与常规PDC齿、仿生PDC齿的耐磨性和切削效率进行对比试验,结果显示：仿生高效切削齿的耐磨性较常规PDC齿提高23%;切削效率较常规PDC齿提高1.49倍,较仿生PDC齿提高48%。初步证明了仿生高效切削齿工艺的可行性,为下一步高效切削钻头的研究奠定了坚实的基础。     

Detachment folding in a Lower Cambrian–Upper Permian karst reservoir: 3D model of the Yubei 3D area (eastern Markit Slope,Tarim Basin,Northwest China)

A three-dimensional (3D) structural modeling of the Lower Cambrian–Upper Permian Yubei 3D area was performed to understand its structural evolution. This model reproduces the present-day structure of the basin and comprises 11 horizons within Lower Cambrian to Upper Permian rocks. The analysis is based on 3D depth views and faults. The results image salt movements due to tectonics and/or burial. From these observations, this paper deduces that salt structures are correlated to the main faults and tectonic events. From the model analysis, we interpret the timing and geometry of Tarim Basin tectonics. The fault geometry can be resolved based on the strike of the fault, the morphology of hanging wall strata, and the stratigraphic distribution. Emphasis is placed on gypsum rock detachment, considering its movements during the Middle Caledonian event and decoupling effects during tectonic evolution. Moreover, we point to the structural control of the Paleozoic basement and the crustal architecture (Yubei 3D Zone) on the geometry of the Tarim Basin.     

MASNUM-WAM海浪模式集合Kalman滤波同化研究-I.风场扰动对海浪模拟影响

模式集合样本的代表性和观测信息的可靠性是制约数据同化效果的重要因素,而前者对海浪模式同化的影响尤为显著。由于海浪模式对初始场的敏感性较弱,来自大气的风输入源函数是海浪的重要能量输入,如何合理地对风输入进行扰动,构造海浪的集合模式运行,是实现和改进海浪模式集合Kalman滤波同化的关键问题。为了实现海浪模式集合运行,本文提出了风场的三种集合扰动方案,分别为：纯随机数、随机场和时间滞后的风场扰动方法。本研究利用2014年1月ECMWF全球风场,基于这三种风场扰动方法开展了集合海浪模式的集合运行实验,并统计分析了海浪特征要素（有效波高）和二维波数谱对风场扰动的响应。结果表明,随机场集合扰动方案所构造的风场集合效果最佳,所得海浪模拟结果的集合样本发散度适中,能够较为合理地反映背景误差的统计特征,可用于进一步的集合Kalman滤波海浪数据同化实验。     

小入射角下海浪后向散射系数不对称性和各向异性分析验证

基于北京遥测技术研究所机载波谱仪实测数据以及ECMWF提供的风场数据,分析了不同风速条件下小入射角海浪平均后向散射系数不对称性与各向异性随入射角的变化特性,并对导致这一现象的原因进行了初步分析。结果表明:小入射角下,海浪平均后向散射系数随入射角增大呈现递减趋势并在18°时达到某一稳定值,之后基本维持不变;海浪后向散射系数不对称性与各向异性均随入射角增大呈现递增趋势,同样在18°增大至某一稳定值,之后基本维持不变;低风速条件下,海浪不对称性和各向异性与风速有关,且风速越大不对称性与各向异性越明显。     

放养密度对大杂交鲟生长性能的影响及生理应答机制

为探讨放养密度对鱼类生长及生理应答机制的影响规律和作用,作者以大规格大杂交鲟(达氏鳇(Huso dauricus)♀×施氏鲟(Acipenser schrenckii)♂)为实验材料,研究了平均初始体质量约为243 g/尾,放养密度分别为6(SD1组)、9(SD2组)、12(SD3组)、15 kg/m3(SD4组)条件下,不同放养密度处理70 d后的实验鱼生长性能变化及生理应答机制。结果显示,放养密度对大杂交鲟肥满度影响不显著,SD2组鱼类具有最大的特定生长率和生长效率,随着放养密度增加,日增质量显著降低(P0.05),特定生长率和生长效率下降。测定了血液甲状腺素(T4)、三碘甲腺原氨酸(T3)和皮质醇水平变化,发现放养密度能引起大杂交鲟3个血液生理指标发生显著改变;随着养殖时间推移,T3和皮质醇浓度显著升高,T4浓度显著下降(P0.05)。这些结果说明神经内分泌活动的变化引起大杂交鲟血液生理指标变化,进而影响实验鱼生长性能。因此,在该养殖条件下推荐的养殖密度为9 kg/m3。     

海洋产业结构与海域承载力的匹配关系探讨——以辽宁省为例

海洋产业结构和海域承载力之间存在多种耦合匹配关系,其匹配程度是影响海洋经济健康持续发展的重要因素,而准确地定量化评价这种匹配关系是准确把握海洋产业结构是否失衡的关键环节。文章将海域承载力引入海洋产业结构问题研究中,首先对海洋产业结构水平和海域承载力定量化测算,在此基础上运用基于数列的匹配度计算方法测度辽宁省海域承载状况与海洋产业结构水平的匹配度,探讨海洋产业结构与海域承载力之间的匹配关系。结果表明:辽宁省海域承载力与海洋产业结构水平匹配度数值较高,二者之间存在较匹配的关系。     

Antialgal and antilarval activities of bioactive compounds extracted from the marine dinoflagellate <Emphasis Type="Italic">Amphidinium carterae</Emphasis>

With the global ban on the application of organotin-based marine coatings by the International Maritime Organization, the development of environmentally friendly, low-toxic and nontoxic antifouling compounds for marine industries has become an urgent need. Marine microorganisms have been considered as a potential source of natural antifoulants. In this study, the antifouling potential of marine dinoflagellate Amphidinium carterae, the toxic and red-tide microalgae, was investigated. We performed a series of operations to extract the bioactive substances from Amphidinium carterae and tested their antialgal and antilarval activities. The crude extract of Amphidinium carterae showed significant antialgal activity and the EC₅₀ value against Skeletonema costatum was 55.4 μg mL^?1. After purification, the isolated bioactive substances (the organic extract C) exhibited much higher antialgal and antilarval activities with EC₅₀ of 12.9 μg mL^?1 against Skeletonema costatum and LC₅₀ of 15.1 μg mL^?1 against Amphibalanus amphitrite larvae. Subsequently, IR, Q-TOFMS, and GC-MS were utilized for the structural elucidation of the bioactive compounds, and a series of unsaturated and saturated 16- to 22-carbon fatty acids were detected. The data suggested the bioactive compounds isolated from Amphidinium carterae exhibited a significant inhibiting effect against the diatom Skeletonema costatum and Amphibalanus amphitrite larvae, and could be substitutes for persistent, toxic antifouling compounds.     

黄铁矿ReOs法测年在胶东金矿中的应用初探

该次工作为黄铁矿Re-Os法测年在胶东金矿中的首次应用。在大尹格庄金矿中获得了由3件黄铁矿样品组成的(144.8±1.8)Ma等时线年龄,暗示着大尹格庄金矿区可能存在一期晚侏罗世的Au成矿事件。通过对大尹格庄、夏甸、土堆金矿黄铁矿Re-Os同位素年代学的研究,表明黄铁矿的Re-Os同位素特征在胶东金矿中具有一定的复杂性。该文总结了影响黄铁矿Re-Os同位素测年结果的因素,认为在利用该方法进行金矿床定年时,应当将不同期次黄铁矿分别送样,适当拉大采样间距,并尽可能降低实验测试误差,以期获得更精确可靠的年龄。     

Testing and modeling of the mechanical behavior of dolomite in the Wudongde hydropower plant

In order to understand the mechanical behaviours of the surrounding rocks in the underground caverns of the Wudongde hydropower plant, triaxial tests are performed on a type of dolomite. It is revealed that damage induced by crack development is the main factor controlling the nonlinear plastic deformation and failure behaviour of the dolomite in both pre- and post-peak regimes. Based on this understanding, a coupled elastoplastic damage model is developed for capturing the dolomite’s mechanical behaviours. In the model, the effects of plasticity and damage on rocks is described by introducing plastic hardening and damage softening commonly in the plastic yield surface. Which are both derived from a suitable Helmholtz free energy function. The model is used to simulate the triaxial tests. Comparisons between test results and the numerical modelling show that the developed model is capable of describing the macro mechanical behaviours of the Wudongde dolomite.