Equivalent linear method considering frequency dependent characteristics of stiffness and damping

Equivalent linear dynamic response analysis of ground is based on complex moduli and Fourier series expansion; therefore, it is not an equivalent method but an approximate method. Two deficiencies in the conventional equivalent linear method represented by SHAKE are described first. The maximum shear strength is overestimated, resulting in overestimation of the peak acceleration under a strong ground motion, and the amplification is underestimated at high frequency. The latter sometimes results in underestimation of the peak acceleration under weak ground shaking, and gives an incident wave with unrealistic large accelerations or a divergence of analysis in deconvolution analysis under strong ground motion. Both deficiencies are shown to come from the same cause, i.e. computing the effective strain as a constant fraction of the maximum strain. Since this is a key concept of the equivalent linear analysis, one cannot overcome both deficiencies at the same time in the conventional method. An apparent frequency dependence in stiffness and damping is shown to appear in the dynamic response, although soil itself does not show frequency dependent characteristics. Following this observation, the effective strain is expressed in terms of frequency from the similarity concept of the strain–frequency relationship between time domain and frequency domain. This enables the reduction of both deficiencies at the same time, resulting in a marked improvement in the equivalent linear analysis. The accuracy of the proposed method is examined by the simulations of three vertical array records during large earthquakes. The proposed method always gives much better prediction than conventional equivalent linear methods for both convolution and deconvolution analyses, and it is confirmed to be applicable at more than 1% shear strain.     

Volcanic Sequences Related to Kuroko Mineralization in the Hokuroku District, Northeast Japan

Abstract. Kuroko deposits are a representative volcanic‐hosted massive sulfide deposit and the Hokuroku district is economically the most important Kuroko containing province in Japan. There are two cycles of the bimodal volcanic sequence in the Hokuroku district. The pre‐ore volcanism started with basaltic activity and was followed by intensive felsic hyaloclas‐tic activity under bathyal conditions. The post‐ore sequence also began with basaltic activity intercalated with mudstone and was followed by alternating beds of pumice tuff with several lava flows and mudstone. Kuroko deposits are situated in the final period of the pre‐ore felsic volcanic sequence of the first bimodal volcanic cycle. Based on a detailed investigation of existing age data, it was concluded that the felsic volcanic sequences in the pre‐and post‐Kuroko formation can be divided into a pre‐ore dacite group (16–13.5 Ma), a D2 dacite group (lower unit of the post‐ore volcanic sequence, 12.7±0.6～ ll Ma) and a Dl dacite group (upper unit of the post‐ore sequence including quartz‐porphyry and granitoid, 11sim;10 Ma) in ascending order. Field and microscopic observations show that the pre‐ore dacite is characterized by aphyric to plagioclase‐phyric lava and the post‐ore dacitic rocks are characterized by quartz‐plagioclase‐phyric aphanitic lava and dome. These three dacite groups are petrochemically discriminated by SiO₂‐Al₂O₃ and CaO‐TiO₂ diagrams, excluding altered specimens. The distribution of the normative compositions on the Q‐An‐Ab‐Or diagram suggests that the pre‐ore dacites trend on the 5 kb cotectic line (equilibrated to 10—15 km deep) and those of the post‐ore trend along the 1 kb line (a few km deep). The secular variation of the major elements indicates that the rhyolitic members genetically related to the Kuroko formation could be the most differentiated products in the pre‐ore felsic volcanism. The distribution of Nb against SiO₂ content in the pre‐ and post‐ore bimodal volcanic cycles indicates that these two volcanisms could have been generated by different magmatic origins. The difference would have been caused by the tectonic conversion from a back‐arc to an island‐arc setting.     

Long-term stability of flow-path structure in crystalline rocks distributed in an orogenic belt, Japan

Most evaluations of the contaminant retardation processes likely to be important in geological disposal (e.g. for high level radioactive waste (HLW)) consider only the present characteristics of fractures and associated mineral infills. Relatively little attention has been given to possible long-term changes in these features, and their influence on groundwater flow. The work reported here seeks to provide analogous evidence that such changes are not likely to be important and hence to improve confidence in the presently adopted evaluation methodology and its long-term applicability.

In the orogenic belt that is formed by the Japanese islands, there are wide areas of crystalline rock. The rocks in each area have a distinctive age sequence which is partly reflected in the characteristics of the fracture systems and associated mineral fillings that occur. These characteristics generally imply that groundwater and solutes can be conducted through fracture networks, except in the cases of fault zones or crushed zones. The structural and mineralogical features of these networks readily illustrate how certain contaminants might react and be retarded by the fracture fillings and open pore geometry, due to chemical sorption and/or physical retardation.

Here, we describe the fracture systems developed in crystalline rocks with different ages that are intruded into the Japanese orogenic belt. The aim is to build a model for the long-term fracturing process and hence to evaluate fracture ‘stability’. In particular, the comparisons are made between the fracture geometries and the frequencies observed in the 1.9–0.8 Ma Takidani Granodiorite (the youngest exposed pluton in the world), the ca. 67 Ma Toki Granite and the ca. 117 Ma Kurihashi Granodiorite located in central to northwest Japan. The observations show that all these crystalline rocks have similar fracture frequencies, with 1 to 2 fractures per meter in the massive part of rock bodies. Mineralogical studies and dating analyses of fracture fillings also suggest that fractures are relatively physically stable. Major new fractures tend not to be created in the massive part of rock bodies even when a pluton has been subjected to the regional stresses of plate movements with a duration of about 100 Ma. The results show the unique characteristics of the fracture forming process and the relatively stable geometries of fracture network systems in crystalline rocks distributed within the orogenic belt. This analogue also enables us to provide a model to build confidence in a technical approach applicable for modeling of hydrogeology and geology over long time scales under the orogenic stress field present in Japan. The model may also be useful for other stable tectonic settings as well as for a characterizing sites in crystalline rocks for the possible geological disposal of HLW and other toxic wastes.     

Damage to Residential Fills in the 1995 Hanshin-Awaji Earthquake

This paper summarizes the features of ground damage toresidential fills due to the 1995 Hyogo-ken NanbuEarthquake in Japan. Many residential lands sufferedground damage to various extents in the earthquakeevent. Permanent deformation took place ingently-sloping residential fills. Some slopes asgentle as four degrees exhibited landslide-likedownward movements from dozens to hundreds ofcentimeters, so on. It is suggested that liquefactionmight be a dominant factor for displacements ingently-inclined residential fills.     

Change in seismic activity in the Tokai region related to weakening and strengthening of the interplate coupling

We investigate the relationship between changes in seismicity and crustal deformations in the Tokai region. We describe how seismicity in the subducted slab increased remarkably in the fall of 2000 and decreased in the fall of 2001, while in contrast, the crust seismicity decreased in the fall of 2000 and increased in the fall of 2001. We note that the trend of horizontal displacement at GPS stations changed coincidentally and we propose interpreting the increase and decrease in seismic activities and the changes in crustal deformations in a unified way based on changes in the state of the interplate coupling, i.e., the back-slip rate was reduced in the fall of 2000 and was partially restored in the fall of 2001. We explain why reduction of the back-slip rate increases seismogenic stress in the slab and decreases stress in the crust. We also describe the substantial positive dilatation observed in the region around Mt. Fuji in the fall of 2000 and suggest that the remarkable increase of low-frequency earthquakes beneath Mt. Fuji in October 2000 may have been caused by deceleration of the converging motion of the Izu micro-plate with the Eurasian plate. The decrease of the subduction velocity of the Izu micro-plate on the Suruga Trough in late 2000 would also have contributed to weakening of the interplate coupling beneath the Tokai region, since reduction of the relative velocity between overriding and subducting plates produces the same effect on the plate interface as a diminishing back-slip rate. However, subduction of the Izu micro-plate on the Suruga Trough was accelerated in early 2003, which may have caused increases in both slab and crust seismicities in that period.     

Mussel watch of PCBs and persistent pesticide residues in Perna viridis Linnaeus from Malaysian and Singapore waters

Mussel watch pollution monitoring programmes, performed at six predetermined stations on the Island of Penang, Malaysia, showed that levels of the pollutant pp′-DDE ranged between 3·7 and 17·4 ppb, while PCBs ranged between 99·9 and 599·9 ppb on a dry weight basis. Similar studies on samples from three stations in the Republic of Singapore varied from 7·11 to 8·12 and 139·8 to 256·4 ppb, respectively, for pp′-DDE and PCBs.The study further indicated that other organic chlorinated hydrocarbons were not detectable in this marine bivalve at either locality. Their absence in this instance could be a feature of the tropics, resulting perhaps from a high rate of degradation, purification or a geographical separation between the source of the pollution and the population investigated.