Epithermal Gold-Silver Mineralization of the Asachinskoe Deposit in South Kamchatka, Russia

The Asachinskoe epithermal Au‐Ag deposit is a representative low‐sulfidation type of deposit in Kamchatka, Russia. In the Asachinskoe deposit there are approximately 40 mineralized veins mainly hosted by dacite–andesite stock intrusions of Miocene–Pliocene age. The veins are emplaced in tensional cracks with a north orientation. Wall‐rock alteration at the bonanza level (170–200 m a.s.l.) consists of the mineral assemblage of quartz, pyrite, albite, illite and trace amounts of smectite. Mineralized veins are well banded with quartz, adularia and minor illite. Mineralization stages in the main zone are divided into stages I–IV. Stage I is relatively barren quartz–adularia association formed at 4.7 ± 0.2 Ma (K‐Ar age). Stage II consists of abundant illite, Cu‐bearing cryptomelane and other manganese oxides and hydroxides, electrum, argentite, quartz, adularia and minor rhodochrosite and calcite. Stage III, the main stage of gold mineralization (4.5–4.4 ± 0.1–3.1 ± 0.1 Ma, K‐Ar age), consists of a large amount of electrum, naumannite and Se‐bearing polybasite with quartz–adularia association. Stage IV is characterized by hydrothermal breccia, where electrum, tetrahedrite and secondary covellite occur with quartz, adularia and illite. The concentration of Au+Ag in ores has a positive correlation with the content of K₂O + Al₂O₃, which is controlled by the presence of adularia and minor illite, and both Hg and Au also have positive correlations with the light rare‐earth elements. Fluid inclusion studies indicate a salinity of 1.0–2.6 wt% NaCl equivalent for the whole deposit, and ore‐forming temperatures are estimated as approximately 160–190°C in stage III of the present 218 m a.s.l. and 170–180°C in stage IV of 200 m a.s.l. The depth of ore formation is estimated to be 90–400 m from the paleo‐water table for stage IV of 200 m a.s.l., if a hydrostatic condition is assumed. An increase of salinity (>C_NaCl≈ 0.2 wt%) and decrease of temperature (>T ≈ 30°C) within a 115‐m vertical interval for the ascending hydrothermal solution is calculated, which is interpreted as due to steam loss during fluid boiling. Ranges of selenium and sulfur fugacities are estimated to be logfSe2 = ?17 to ?14.5 and logfS2 = ?15 to ?12 for the ore‐forming solution that was responsible for Au‐Ag‐Se precipitation in stage III of 200 m a.s.l. Separation of Se from S‐Se complex in the solution and its partition into selenides could be due to a relatively oxidizing condition. The precipitation of Au‐Ag‐Se was caused by boiling in stage III, and the precipitation of Au‐Ag‐Cu was caused by sudden decompression and boiling in stage IV.     

Geochemical Changes in Spring Water Associated with the 2000 Eruption of the Miyakejima Volcano, Japan

Water was sampled from eight springs and a lake in volcanic Miyakejima Island of Japan after the 2000 eruption. Major chemical and isotopic compositions of the water were analyzed. Significant increases of sulfate ion are observed in several springs where the thickness of ejecta exceeds 32 mm. A good relationship of Cl/S mole ratios between spring water and leachate of the ejecta is observed. Sulfur isotopic compositions of the spring water become close to that of leachate of the ejecta as time elapses after the eruption. Consequently the sources of the added sulfate ion in the spring water after the eruption are interpreted to be anhydrite and adhered sulfur of the ejecta.     

Software framework for distributed experimental–computational simulation of structural systems

Supported by the recent advancement of experimental test methods, numerical simulation, and high‐speed communication networks, it is possible to distribute geographically the testing of structural systems using hybrid experimental–computational simulation. One of the barriers for this advanced testing is the lack of flexible software for hybrid simulation using heterogeneous experimental equipment. To address this need, an object‐oriented software framework is designed, developed, implemented, and demonstrated for distributed experimental–computational simulation of structural systems. The software computes the imposed displacements for a range of test methods and co‐ordinates the control of local and distributed configurations of experimental equipment. The object‐oriented design of the software promotes the sharing of modules for experimental equipment, test set‐ups, simulation models, and test methods. The communication model for distributed hybrid testing is similar to that used for parallel computing to solve structural simulation problems. As a demonstration, a distributed pseudodynamic test was conducted using a client–server approach, in which the server program controlled the test equipment in Japan and the client program performed the computational simulation in the United States. The distributed hybrid simulation showed that the software framework is flexible and reliable. Copyright © 2005 John Wiley & Sons, Ltd.     

Concentrations of 222 Rn, Its Short-Lived Daughters And 212 Pb And Their Ratios Under Complex Atmospheric Conditions And Topography

Atmospheric activity concentrations of ²¹²Pb and short-lived ²²²Rndaughters, together with meteorological elements, have been observed continuously atthree sites at Kamisaibara Village in Japan. In addition, atmospheric activity concentrationof ²²²Rn, equilibrium-equivalent concentration of ²²²Rn and conditionsof the lower atmosphere were observed for three intensive observation periods at Akawase,one of the three sites in Kamisaibara Village. The equilibrium-equivalent concentration of²²²Rn is almost the same as the atmospheric activity concentration of short-lived²²²Rn daughters.The activity concentrations of ²¹²Pb and the short-lived ²²²Rn daughtersand their ratio were low in the daytime owing to convective mixing, and high at nightowing to the surface-based inversion during periods of no precipitation. Their variationshave several patterns corresponding to the scale of the drainage wind or weak mixing.Mechanical mixing due to strong winds through both day and night during the first andsecond observation periods made the atmospheric activity concentrations of ²¹²Pb and the short-lived ²²²Rn daughters continuously low. However, their ratios werecontinuously high during the first period yet continuously low during the second period.This difference can be explained by the effect ofextraction of ²²⁰Rn and ²²²Rndue to strong winds and snow cover. There were also cases in which the ratio of theatmospheric activity concentration of ²¹²Pb to that of the short-lived ²²²Rndaughters at night was equal to or less than the ratio in the daytime. Thisinverse trend, asin the periods of no precipitation mentioned above, is considered to be due to near-neutralconditions on these nights.We find a difference in the ratio of the equilibrium-equivalent concentration of²²²Rn (the activity concentration of short-lived ²²²Rn daughters) tothe activity concentration of ²²²Rn during the first observation period and thatduring the second. The difference can be explained by snow cover on the ground. Wealso find differences among the ratios of the activity concentration of the short-lived²²²Rn daughters to that of ²²²Rn during the three observation periods.These differences can be explained by the submergence of paddy fields.     

Study of quantization effects on rainfall rate estimation from GPM dual-frequency radar

The effect of quantization on rainfall rate estimation from the Global Precipitation Measurement dual-frequency radar is studied quantitatively through numerical simulations. The error generated by a deterministic quantization or by a dithered quantization on rainfall rate estimation is combined with the errors from statistical fluctuation of the signal and the receiver noise. The preliminary results for the rain-rate range of 1-10 mmh/sup -1/ are presented.     

Seismological structure and implications of collision between the Ontong Java Plateau and Solomon Island Arc from ocean bottom seismometer–airgun data

A seismic refraction–reflection experiment using ocean bottom seismometers and a tuned airgun array was conducted around the Solomon Island Arc to investigate the fate of an oceanic plateau adjacent to a subduction zone. Here, the Ontong Java Plateau is converging from north with the Solomon Island Arc as part of the Pacific Plate. According to our two-dimensional P-wave velocity structure modeling, the thickness of the Ontong Java Plateau is about 33 km including a thick (15 km) high-velocity layer (7.2 km/s). The thick crust of the Ontong Java Plateau still persists below the Malaita Accreted Province. We interpreted that the shallow part of the Ontong Java Plateau is accreted in front of the Solomon Island Arc as the Malaita Accreted Province and the North Solomon Trench are not a subduction zone but a deformation front of accreted materials. The subduction of the India–Australia Plate from the south at the San Cristobal Trench is confirmed to a depth of about 20 km below sea level. Seismicity around our survey area shows shallow (about 50 km) hypocenters from the San Cristobal Trench and deep (about 200 km) hypocenters from the other side of the Solomon Island Arc. No earthquakes occurred around the North Solomon Trench. The deep seismicity and our velocity model suggest that the lower part of the Ontong Java Plateau is subducting. After the oceanic plateau closes in on the arc, the upper part of the oceanic plateau is accreted with the arc and the lower part is subducted below the arc. The estimation of crustal bulk composition from the velocity model indicates that the upper portion and the total of the Solomon Island Arc are SiO₂ 58% and 53%, respectively, which is almost same as that of the Izu–Bonin Arc. This means that the Solomon Island Arc can be a contributor to growing continental crust. The bulk composition of the Ontong Java Plateau is SiO₂ 49–50%, which is meaningfully lower than those of continents. The accreted province in front of the arc is growing with the convergence of the two plates, and this accretion of the upper part of the oceanic plateau may be another process of crustal growth, although the proportion of such contribution is not clear.     

Cenozoic lithospheric extension induced magmatism in Southwest Japan

Island chains off western Kyushu are the surface exposure in the northern margin of the Taiwan–Sinzi Folded Zone that spreads along the arc–trench system in the back-arc side from SW Japan to Taiwan. Intermittent igneous activity between the Middle Miocene and Holocene occurred on these islands and widely covered or intruded sedimentary rocks of Early–Middle Miocene. Geochemistry of the volcanic rocks from the Hirado, Ikitsuki and Takushima islands believed to relate to the back-arc opening along the East China and Japan Seas shows a temporal change in source material. Submarine to sub-aerial volcanism occurred on Hirado Island at 15 Ma during the final opening stage of the East China Sea producing tholeiitic basalt and associated andesite–dacite. These eruptives show low incompatible element contents and high FeO*/MgO ratios and reflect a tholeiitic differentiation trend. High Sr and Pb and low Nd isotopic ratios suggest the involvement of EM2-like lithospheric mantle and crustal material in the formation of these syn-opening volcanic rocks. Post-opening alkali basalt volcanism occurred at 9–6 Ma on the islands is characterized by OIB-like higher large ionic lithophile elements (LILE) and high field strength elements (HFSE) compared to 15 Ma basalts in this region and Quaternary basalts along the volcanic front. They have variable range of incompatible element concentrations and ratios along with variable Sr, Pb and Nd isotopic ratios suggesting the involvement of both lithospheric and asthenospheric sources at variable melting degrees (from 4% to less than 15%). The observation that the isotopic compositions of Quaternary alkali basalts south of the studied area are even more depleted suggests an increase in the involvement of asthenospheric source with time.     

Growth of quartz crystals twinned after Japan Law

The flattened or elongated morphology often observed in contact twinned crystals has been referred to the so-called re-entrant corner effect at twin junctions. To re-investigate the validity of this mechanism, natural quartz crystals twinned after Japan Law have been subjected to re-growth in a commercial synthetic quartz autoclave, and the change in their morphology and surface microtopography by re-growth studied. It is found that although twin re-entrant corners may play a role of preferential growth sites, this role can be weakened considerably and in fact can become almost negligible when crystals grow under high supersaturation condition. Preferential growth at the re-entrant corner of a twin junction is probably due to clusters of dislocations concentrated in the composition plane, and not due to the so-called re-entrant corner effect in its original sense.     

Ar and Sr isotopes of mantle-derived rocks from the Japanese Islands

⁴⁰Ar-³⁰Ar and Sr isotope analyses have been made for ultramatic nodules in basaltic rocks from Itinome-gata and the Oki-Dōgo Island, northeast and southwest of Japan respectively, in order to examine the state of the upper mantle under the Japanese Islands. ⁴⁰Ar-³⁰Ar analyses have revealed that ultramafic nodules from Oki-Dōgo Island were involved in events which caused Ar redistribution in these rocks and probably were related to their formation not older than several tens of millions of years ago. These nodules are relatively depleted in both Rb and Sr contents together with some other incompatible elements compared to similar nodules from the other regions in the world. This may be typical for ultramafic nodules from the Japanese Islands. Ultramafic nodules show mostly a little higher⁸⁷Sr/⁸⁶Sr ratios (0.704–0.706) than those of host basaltic rocks (0.703–0.705) indicating the accidental origin for these nodules. Present results also suggest both horizontal and vertical inhomogeneities of the uppermost part of the mantle with respect to Sr isotopes on a regional scale. Hence, the ultramafic nodules in volcanic rocks may not always directly represent the upper mantle materials from which the magma is produced at present. Such ultramafic nodules might be relatively old material from the uppermost part of the mantle under the Japanese Islands.