Evaluation of various satellite sensors for waterline extraction in a coral reef environment: Majuro Atoll, Marshall Islands

The ability of five satellite sensor bands (IKONOS band 4, Terra ASTER bands 3 and 4, and Landsat ETM+ bands 4 and 5) was examined to extract the waterline at coral reef coasts (Majuro Atoll, Marshall Islands) using different wavelength regions (near infrared [NIR] and shortwave infrared [SWIR]) and different spatial resolutions (4, 15, and 30 m). After performing georeferencing and normalization of the images, density slicing was used to extract the waterline. Comparisons of extracted waterline positions with ground-level data for eight transects and global positioning system (GPS) tracks of the island shorelines showed that NIR bands were superior to SWIR bands because of the characteristics of the coral reef coasts, including a lack of foam and suspended sediments (which can affect the NIR wavelength region, if present) and the presence of remnant water on reef flats during low tide (which can affect the SWIR wavelength region). A linear relationship was found between the estimation errors of waterline positions and the spatial resolutions of the NIR sensors. Analysis on estimation errors and image costs showed that Terra ASTER band 3 was the most cost-effective sensor for extracting waterlines with reasonable accuracy. The results serve as general guidelines for using satellite-derived data to estimate intertidal topography and detect and monitor shorelines in coral reef environments.     

Control algorithm for estimating future responses of active variable stiffness structure

A control algorithm has been developed for controlling Active Variable Stiffness (AVS) structures. This algorithm analyses information of an observed seismic excitation, estimates the future structural responses and determines how to alter the structure stiffness. An objective structure is assumed to possess N on-off elements whose states are controlled by the proposed algorithm. That is, at a given moment t_k, (1) seismic excitation information is expressed by an Auto Regressive (AR) model as the identification model; (2) future excitation information is predicted using the AR model; (3) future responses due to predicted excitation are estimated; (4) based on the initial condition at t_k, the responses of 2^N possible structural states from t_k, to t_k+L are calculated; (5) the state which minimizes the input energy during t_L is selected; and (6) immediately after t_k, on-off elements are set up and subjected to the selected states. The effectiveness of the induced algorithm is confirmed by numerical experiments on a model of a three-storey building under sine and seismic excitations.     

Control strategy for variable damping element considering near‐future excitation influence

A control strategy is proposed for variable damping elements (VDEs) used together with auxiliary stiffness elements (ASEs) that compose a time‐varying non‐linear Maxwell (NMW) element, considering near‐future excitation influence. The strategy first composes a state equation for the structural dynamics and the mechanical balance in the NMW elements. Next, it establishes a cost function for estimating future responses by the weighted quadratic norms of the state vector, the controlled force and the VDEs' damping coefficients. Then, the Euler equations for the optimum values are introduced, and also approximated by the first‐order terms under the autoregressive (AR) model of excitation information. Thus, at each moment t_k, the strategy conducts the following steps: (1) identify the obtained seismic excitation information to an AR model, and convert it to a state equation; and (2) determine VDEs' damping coefficients under the initial conditions at t_k and the final state at t_k+L, using the first‐order approximation of the Euler equations. The control effects are examined by numerical experiments. Copyright © 2000 John Wiley & Sons, Ltd.     

Paleoenvironmental interpretations of Quaternary reef deposits based on comparisons of 10 selected modern and fossil larger foraminifera from the Ryukyu Islands, Japan

Abstract A new method for reconstructing depositional environments of larger foraminifera‐bearing limestones is proposed. First, depth and spatial distributions of empty tests of 10 foraminiferal taxa in a 1–2 mm size fraction were examined using 32 surface sediment samples collected from depths shallower than 200 m, located to the west of Miyako Island, Ryukyu Islands, northwest Pacific. Distributional ranges of empty tests in the 1–2 mm size fraction appear to be more limited than those including other size fractions in previous reports, partly because larger empty tests of each taxon are less easily transported than smaller ones. Multivariate analyses (Q‐mode cluster analysis and non‐metric multidimensional scaling ordination) based on binary (presence/absence) data of the 10 taxa delineate four sample groups, each of which corresponds to different depositional environments: nearshore zone/bay inlet; back‐reef to fore‐reef; outer shelf to shelf slope; and shelf slope distant from coral reefs. Next, these modern data were applied to reconstruct the depositional environment of a rock section distributed in the Shiratorizaki area (Irabu Island, Ryukyu Islands), which consists of larger foraminiferal limestone of the Pleistocene Ryukyu Group. Multivariate analyses were performed on the fossil plus the modern foraminiferal data to explore the possible relationship of the fossil associations with variations in modern associations, demonstrating that the fossil foraminiferal associations resemble the modern outer shelf associations. The modern analog technique was also applied to estimate paleobathymetry using fossil foraminiferal data. The results indicate that the section studied was deposited in outer shelf environments at depths between 53.5 and 98.6 m. These paleoenvironmental interpretations are consistent with previous studies based on sedimentary facies and the computer‐based expert system. The modern dataset and methods used in our work would be particularly useful for paleoenvironmental reconstructions of Quaternary reef and shelf carbonates along active margins of the northwest Pacific.     

Bracketed and normalized durations of earthquake ground acceleration

Multiple regression analyses of the duration of earthquake ground acceleration are presented. Two types of duration are considered, i.e. bracketed duration and normalized duration. The bracketed duration t_a is defined as the elapsed time between the first and last acceleration excursions greater than a [cm/s²], and the normalized duration Tα is defined as the elapsed time between the first and last acceleration excursions greater than α times (0 < α < 1) the peak acceleration. Employed are 394 components of horizontal strong motion acceleration records obtained at 67 free field sites in Japan. With the use of multiple regression analysis, the dependence of the bracketed and normalized durations on earthquake magnitude and epicentral distance is studied.     

Clay Minerals in an Active Hydrothermal Field at Iheya‐North‐Knoll,Okinawa Trough

Iheya‐North‐Knoll is one of the small knolls covered with thick sediments in the Okinawa Trough back‐arc basin. At the east slope of Iheya‐North‐Knoll, nine hydrothermal vents with sulfide mounds are present. The Integrated Ocean Drilling Program (IODP) Expedition 331 studied Iheya‐North‐Knoll in September 2010. The expedition provided us with the opportunity to study clay minerals in deep sediments in Iheya‐North‐Knoll. To reveal characteristics of clay minerals in the deep sediments, samples from the drilling cores at three sites close to the most active hydrothermal vent were analyzed by X‐ray diffraction, scanning electron microscope and transmission electron microscope. The sediments are classified into Layer 0 (shallow), Layer 1 (deep), Layer 2 (deeper) and Layer 3 (deepest) on the basis of the assemblage of clay minerals. Layer 0 contains no clay minerals. Layer 1 contains smectite, kaolinite and illite/smectite mixed‐layer mineral. Layer 2 contains chlorite, corrensite and chlorite/smectite mixed‐layer mineral. Layer 3 is grouped into three sub‐layers, 3A, 3B and 3C; Sub‐layer 3A contains chlorite and illite/smectite mixed‐layer mineral, sub‐layer 3B contains chlorite/smectite and illite/smectite mixed‐layer minerals, and sub‐layer 3C contains chlorite and illite. Large amounts of di‐octahedral clay minerals such as smectite, kaolinite, illite and illite/smectite mixed‐layer mineral are found in Iheya‐North‐Knoll, which is rarely observed in hydrothermal fields in mid‐ocean ridges. Tri‐octahedral clay minerals such as chlorite, corrensite and chlorite/smectite mixed‐layer mineral in Iheya‐North‐Knoll have low Fe/(Fe + Mg) ratios compared with those in mid‐ocean ridges. In conclusion, the characteristics of clay minerals in Iheya‐North‐Knoll differ from those in mid‐ocean ridges; di‐octahedral clay minerals and Fe‐poor tri‐octahedral clay minerals occur in Iheya‐North‐Knoll but not in mid‐ocean ridges.     

Polycyclic aromatic hydrocarbons (PAHs) associated with atmospheric particles in Higashi Hiroshima, Japan: Influence of meteorological conditions and seasonal variations

This work studied the influence of meteorological conditions on particulate polycyclic aromatic hydrocarbons (PAHs) in the atmosphere of Higashi Hiroshima, Japan. The seasonal variation of particulate PAHs was also covered. It was found that ambient temperature, solar intensity and weekly rainfall had significant influence on the particulate PAH concentration based on correlation studies. Correlation of particulate PAHs with ambient temperature, solar intensity, weekly rainfall, wind speed and humidity was studied by using Pearson correlation analysis. Particulate PAHs had a strong negative correlation with ambient temperature and solar intensity. A moderate negative correlation with weekly rainfall was also observed. There was no significant correlation between particulate PAHs with wind speed as well as humidity. Besides, particulate PAHs were found to have significant positive correlation with sulfur dioxide and nitrogen dioxide while having a moderate negative correlation with ozone. The particulate PAHs in Higashi Hiroshima exerted distinct seasonal variation with a higher concentration in winter and lower concentration in summer. When compared among PAHs with different numbers of aromatic rings; 5-ring PAHs was found to exert the most distinct seasonal variation. The contribution of carcinogenic PAHs to total particulate PAH concentration was fairly constant at about 50% throughout the year.     

A role for a superficial sediment layer in upward nutrient fluxes across the overlying water–sediment interface

A superficial sediment layer (SL) is the top 2–3 mm layer of surface sediment that may contribute to high upward nutrient flux. To study the characteristics and the biogeochemical processes in the superficial layer, the seasonal variation in the total phytopigments (chlorophyll a and pheo-pigments), total organic carbon (TOC), and total nitrogen (TN) of the surface sediments in a shallow coastal area, Shido Bay, were measured, and the influence of the superficial sediment layer on nutrient flux at the sediment–water interface was investigated. TOC and TN content were relatively constant for the SL and subsurface layers (0–1 and 1–2 cm) during the study period. In contrast, total phytopigments content was higher in the SL layer than in the subsurface layers. The results of upward nutrient flux experiments showed higher nutrient release within the whole sediment core (SL remaining) than the SL-less (SL removed) core. Moreover, high nutrient fluxes were observed during the high temperature season, indicating that seasonal variation in nutrient flux was regulated by temperature. Moreover, in the low temperature season, the SL seemed to absorb nutrients, probably because of microphytobenthos photosynthesis that took up the nutrients under the sufficient light penetration to the sea floor.