Model suggested for an important part of the hydro-mechanical behaviour of a water unsaturated bentonite

The hydro-mechanical behaviour of a clay-based buffer material for nuclear waste disposal has been investigated in a laboratory program. In this program, the main focus was on the influence of confinement on water uptake and swelling pressure during suction decrease. The laboratory program and some of the results are presented by Dueck [Dueck, A., 2006. Laboratory results from hydro-mechanical tests on a water unsaturated bentonite. submitted for publication.].

The results from the laboratory tests were used to find a relationship between water content, void ratio, swelling pressure and suction. Two equations for swelling pressure represent the outline of the model.

In the first equation, the swelling pressure developed during water uptake is normalised by a pressure corresponding to the swelling pressure at saturation. This is done in order to be independent of void ratio. A relationship between the normalised swelling pressure and the degree of saturation is suggested.

The second equation describes a relationship between the swelling pressure, the water content and the actual suction (or relative humidity). The equation is based on a thermodynamic relationship and includes the retention curve (i.e. water content vs. suction under free swelling conditions).

The model can be used for a state where two of the four variables; water content, void ratio, swelling pressure and suction are known and can thus be useful to evaluate field measurements and model late stages of the wetting process. An example of an application is given. The equations are mainly based on results from tests with increasing degrees of saturation under constant void ratio but are also suggested for use with increasing void ratio.     

Carbon-isotopic analysis of individual pollen grains from C3 and C4 grasses using a spooling-wire microcombustion interface

Pollen grains from grasses using the C₃ and C₄ photosynthetic pathways have distinct ranges of δ¹³C values that may be used to estimate their relative abundance in paleorecords. We evaluated a spooling-wire microcombustion device interfaced with an isotope-ratio mass spectrometer (SWiM-IRMS) for δ¹³C analysis of individual grass-pollen grains. Pollen from four C₃ and four C₄ grass species was isolated through micromanipulation and analyzed as single grains suspended in water. A carbon yield greater than the 2σ range of the carbon content of blanks containing only water was used to distinguish samples containing pollen (“pollen present”) from those not containing pollen. This criterion resulted in the exclusion of ∼45% of the 946 samples applied to the wire. The average δ¹³C values (±1σ) of the remaining samples were −26.9‰ (±6.3‰) and −11.5‰ (±9.6‰) for C₃ grasses and C₄ grasses, respectively, after blank-correcting the δ¹³C data. These results suggest that the SWiM-IRMS system can be used to distinguish C₃ from C₄ grass pollen. The high variability in measured δ¹³C values is likely caused by a combination of factors. These include natural isotopic variability among individual pollen grains; the relatively poor precision that can be obtained when determining δ¹³C values of such small samples; and the uncertainty in the magnitude, isotopic composition, and stability of the analytical blank. Nonetheless, high percentages of individual pollen grains were correctly classified as being of either C₃ or C₄ origin. On average, 90% (range = 78-100%) of pollen grains from C₃ grasses had δ¹³C values more negative than the cutoff threshold of −19.2‰; while 84% (range = 77-90%) of pollen grains from C₄ grasses had δ¹³C values more positive than −19.2‰. Compared with analysis using an elemental analyzer interfaced with an IRMS (EA-IRMS), the number of pollen grains required for δ¹³C-based evaluation of C₃/C₄ grass composition is many times lower with the SWiM-IRMS. Additionally, δ¹³C data from the SWiM-IRMS does not need to be incorporated into a mixing model to derive estimates of the abundance of C₃ and C₄ grass pollen. Carbon-isotopic analysis of individual grass-pollen grains using the SWiM-IRMS system may help improve our understanding of the evolutionary and ecological significance of grass taxa in the paleorecord.     

NanoSIMS isotopic analysis of small presolar grains: Search for Si3N4 grains from AGB stars and Al and Ti isotopic compositions of rare presolar SiC grains

We report isotopic ratio measurements of small SiC and Si₃N₄ grains, with special emphasis on presolar SiC grains of type Z, and new nucleosynthesis models for ²⁶Al/²⁷Al and the Ti isotopic ratios in asymptotic giant branch (AGB) stars. With the NanoSIMS we analyzed 310 SiC grains from Murchison (carbonaceous CM2 chondrite) separate KJB (diameters 0.25-0.45 μm) and 153 SiC grains from KJG (diameters 1.8-3.7 μm), 154 SiC and 23 Si₃N₄ grains from Indarch (enstatite EH4 chondrite) separate IH6 (diameters 0.25-0.65 μm) for their C and N isotopic compositions, 549 SiC and 142 Si₃N₄ grains from IH6 for their C and Si isotopic compositions, 13 SiC grains from Murchison and 66 from Indarch for their Al-Mg compositions, and eight SiC grains from Murchison and 10 from Indarch for their Ti isotopic compositions. One of the original objectives of this effort was to compare isotopic analyses with the NanoSIMS with analyses previously obtained with the Cameca IMS 3f ion microprobe. Many of the Si₃N₄ grains from Indarch have isotopic anomalies but most of these apparently originate from adjacent SiC grains. Only one Si₃N₄ grain, with ¹³C and ¹⁴N excesses, has a likely AGB origin. The C, N, and Si isotopic data show that the percentage of SiC grains of type Y and Z increase with decreasing grain size (from ∼1% for grains >2 μm to ∼5-7% for grains of 0.5 μm), providing an opportunity for isotopic analyses in these rare grains. Our measurements expand the number of Al-Mg analyses on SiC Z grains from 4 to 23 and the number of Ti analyses on Z grains from 2 to 11. Inferred²⁶Al/²⁷Al ratios of Z grains are in the range found in mainstream and Y grains and do not exceed those predicted by models of AGB nucleosynthesis. Cool bottom processing (CBP) has been invoked to explain the low ¹²C/¹³C ratios of Z grains, but this process apparently does not lead to increased ²⁶Al production in the parent stars of these grains. This finding is in contrast to presolar oxide grains where CBP is needed to explain their high ²⁶Al/²⁷Al ratios. The low ^46,47,49Ti/⁴⁸Ti ratios found in Z grains and their correlation with low ²⁹Si/²⁸Si ratios extend the trend seen in mainstream grains and confirm an origin in low-metallicity AGB stars. The relatively large excesses in ³⁰Si and ⁵⁰Ti in Z grains are predicted by our models to be the result of increased production of these isotopes by neutron-capture nucleosynthesis in low-metallicity AGB stars. However, the predicted excesses in ⁵⁰Ti (and ⁴⁹Ti) are much larger than those found. Even lowering the strength of the ¹³C pocket cannot solve this discrepancy in a consistent way.     

Desert Potholes: Ephemeral Aquatic Microsystems

An enigma of the Colorado Plateau high desert is the “pothole”, which ranges from shallow ephemeral puddles to deeply carved pools. The existence of prokaryotic to eukaryotic organisms within these pools is largely controlled by the presence of collected rainwater. Multivariate statistical analysis of physical and chemical limnologic data variables measured from potholes indicates spatial and temporal variations, particularly in water depth, manganese, iron, nitrate and sulfate concentrations and salinity. Variation in water depth and salinity are likely related to the amount of time since the last precipitation, whereas the other variables may be related to redox potential. The spatial and temporal variations in water chemistry affect the distribution of organisms, which must adapt to daily and seasonal extremes of fluctuating temperature (0–60 °C), pH changes of as much as 5 units over 12 days, and desiccation. For example, many species become dormant when potholes dry, in order to endure intense heat, UV radiation, desiccation and freezing, only to flourish again upon rehydration. But the pothole organisms also have a profound impact on the potholes. Through photosynthesis and respiration, pothole organisms affect redox potential, and indirectly alter the water chemistry. Laboratory examination of dried biofilm from the potholes revealed that within 2 weeks of hydration, the surface of the desiccated, black biofilm became green from cyanobacterial growth, which supported significant growth in heterotrophic bacterial populations. This complex biofilm is persumably responsible for dissolving the cement between the sandstone grains, allowing the potholes to enlarge, and for sealing the potholes, enabling them to retain water longer than the surrounding sandstone. Despite the remarkable ability of life in potholes to persist, desert potholes may be extremely sensitive to anthropogenic effects. The unique limnology and ecology of Utah potholes holds great scientific value for understanding water–rock–biological interactions with possible applications to life on other planetary bodies.     

Comparison of benthic invertebrate assemblages at Spartina alterniflora marshes reestablished after an oil spill and existing marshes in the Arthur Kill (NY/NJ)

In January 1990, an oil spill damaged salt marshes along the banks of the Arthur Kill (New York and New Jersey, USA). In the years following the spill, Spartina alterniflora seedlings were planted at a number of the oil damaged sites and successfully reestablished at these sites. In 1996, the National Marine Fisheries Service began a study to compare the benthic invertebrate assemblages at the reestablished S. alterniflora marshes to those at nearby existing marshes in the Arthur Kill. Oligochaetes, nematodes, and the small tube-building polychaete, Manayunkia aestuarina were the dominant taxa in the study. Significant differences were found in the abundances of all invertebrate individuals, oligochaetes, and nematodes between the September and May sampling times but not between reestablished and existing marshes. Although benthic invertebrate community structure was similar at reestablished and existing marshes three to four years after planting, the functional similarity of these marshes was not assessed in this study.     

Assessment of carbon in woody plants and soil across a vineyard-woodland landscape

Background

Quantification of ecosystem services, such as carbon (C) storage, can demonstrate the benefits of managing for both production and habitat conservation in agricultural landscapes. In this study, we evaluated C stocks and woody plant diversity across vineyard blocks and adjoining woodland ecosystems (wildlands) for an organic vineyard in northern California. Carbon was measured in soil from 44 one m deep pits, and in aboveground woody biomass from 93 vegetation plots. These data were combined with physical landscape variables to model C stocks using a geographic information system and multivariate linear regression.

Results

Field data showed wildlands to be heterogeneous in both C stocks and woody tree diversity, reflecting the mosaic of several different vegetation types, and storing on average 36.8 Mg C/ha in aboveground woody biomass and 89.3 Mg C/ha in soil. Not surprisingly, vineyard blocks showed less variation in above- and belowground C, with an average of 3.0 and 84.1 Mg C/ha, respectively.

Conclusions

This research demonstrates that vineyards managed with practices that conserve some fraction of adjoining wildlands yield benefits for increasing overall C stocks and species and habitat diversity in integrated agricultural landscapes. For such complex landscapes, high resolution spatial modeling is challenging and requires accurate characterization of the landscape by vegetation type, physical structure, sufficient sampling, and allometric equations that relate tree species to each landscape. Geographic information systems and remote sensing techniques are useful for integrating the above variables into an analysis platform to estimate C stocks in these working landscapes, thereby helping land managers qualify for greenhouse gas mitigation credits. Carbon policy in California, however, shows a lack of focus on C stocks compared to emissions, and on agriculture compared to other sectors. Correcting these policy shortcomings could create incentives for ecosystem service provision, including C storage, as well as encourage better farm stewardship and habitat conservation.

     

Tidal boundary conditions in SEAWAT

SEAWAT, a U.S. Geological Survey groundwater flow and transport code, is increasingly used to model the effects of tidal motion on coastal aquifers. Different options are available to simulate tidal boundaries but no guidelines exist nor have comparisons been made to identify the most effective approach. We test seven methods to simulate a sloping beach and a tidal flat. The ocean is represented in one of the three ways: directly using a high hydraulic conductivity (high-K) zone and indirect simulation via specified head boundaries using either the General Head Boundary (GHB) or the new Periodic Boundary Condition (PBC) package. All beach models simulate similar water fluxes across the upland boundary and across the sediment-water interface although the ratio of intertidal to subtidal flow is different at low tide. Simulating a seepage face results in larger intertidal fluxes and influences near-shore heads and salinity. Major differences in flow occur in the tidal flat simulations. Because SEAWAT does not simulate unsaturated flow the water table only rises via flow through the saturated zone. This results in delayed propagation of the rising tidal signal inland. Inundation of the tidal flat is delayed as is flow into the aquifer across the flat. This is severe in the high-K and PBC models but mild in the GHB models. Results indicate that any of the tidal boundary options are fine if the ocean-aquifer interface is steep. However, as the slope of that interface decreases, the high-K and PBC approaches perform poorly and the GHB boundary is preferable.