The relationship between turbidity and spectral optical depth

Abstract

Spectral and spectrally integrated direct beam irradiances measured in Hamilton during the summer of 1981 were used to examine the relationship between the aerosol optical depth τ_a and Unsworth and Monteith's turbidity coefficient τ_A, which is a measure of spectrally averaged optical depth. Good correlation was obtained between τ_a at a wavelength of 0.67 μm and τ_A, thus confirming experimentally Blanchet's (1982) conclusion from a numerical study.     

Diatom assemblages and water depth in Lake 239 (Experimental Lakes Area,Ontario): implications for paleoclimatic studies

Diatom assemblages in surface sediments were sampled along three transects in Lake 239, from the Experimental Lakes Area (NW Ontario), and analyzed in order to explore the relationship between modern species distributions and water depth. Approximately 170 diatom species were identified in surficial sediments at lake depths from 2 to 30 m. The species composition varied with sample depth but remained highly similar across all three transects. The main patterns of variation in the diatom assemblages across transects, derived from a detrended correspondence analysis (DCA), showed that assemblages were highly correlated (r = 0.97 to 0.98). At depths > 8 m the pattern of predominantly benthic composition changed to a planktonic assemblage dominated by Cyclotella stelligera. This depth currently corresponds to the depth of 1% light penetration as assessed from extinction coefficient measurements. Diatom species diversity increases with the switch to the near-shore benthic taxa in all three transects. Additionally, there is a large decrease in the ratio of chrysophyte scales to diatoms at depths < 8 m. Light transmission data from wet and dry periods over the last 35 years suggests that during dry periods the extent of the littoral zone should change by over 2 m. We suggest that cores along a transect from 8 to 14 m should provide a highly sensitive location for detailed paleoclimatic study.     

Optimistic bias and the consistency of hurricane track forecasts

Forecast graphics depicting a hurricane track and uncertainty cone have become pervasive in the communication of hurricane risk. This study examined whether the effect of hurricane tracks on risk perception is influenced by the consistency and optimistic bias. Specifically, it focused on the differences between forecasts that remain consistent compared to those that veer away for a forecast period. To answer the research question, this study conducted online surveys in which respondents from two coastal universities were asked risk perception questions based on a series of forecast graphics. Other variables measured included dispositional optimism, general hurricane risk perception, and hurricane information use. Optimistic bias was calculated from two of the risk perception questions. Results did not indicate strong support for an influence of optimistic bias or changing forecast track on risk perception. There was limited evidence that a veering track scenario may lead to differences in risk judgments about another location, but most measures of personal risk estimation were not influenced by the track. Dispositional optimism was not related to optimistic bias or many of the risk perception variables tested, including general hurricane risk perception. There did appear to be an interaction between track scenario and optimistic bias with more relationships being significant among those who received the consistent track scenario.     

Using sedimentology to address the marine or continental origin of the Permian Hutchinson Salt Member of Kansas

The Permian Hutchinson Salt Member of the Wellington Formation of the Sumner Group of Kansas (USA) has multiple scientific and industrial uses. Although this member is highly utilized, there has not been a sedimentological study on these rocks in over 50 years, and no study has investigated the full thickness of this member. Past publications have inferred a marine origin as the depositional environment. Here, this marine interpretation is challenged. The goals of this study are to fully document sedimentological and stratigraphic characteristics of the Permian Hutchinson Salt Member in the Atomic Energy Commission Test Hole 2 core from Rice County, Kansas. This study documents colour, mineralogy, sedimentary textures, sedimentary structures, diagenetic features and stratigraphic contacts in core slab and thin sections. The Hutchinson Salt Member is composed of five lithologies: bedded halite, siliciclastic mudstone, displacive halite, bedded gypsum/anhydrite and displacive gypsum/anhydrite. These lithologies formed in shallow surface brines and mudflats that underwent periods of flooding, evapoconcentration and desiccation. Of note are the paucity of carbonates, lack of marine-diagnostic fossils, absence of characteristic marine minerals and lithofacies, and the stratigraphic context of the Hutchinson with associated continental deposits. The Hutchinson Salt Member was most likely deposited in an arid continental setting. This new interpretation offers a refined view of Pangaea during the middle Permian time.     

Geochemical characteristics of gold-related granitoids in southwestern New Brunswick, Canada

Two groups of granitoids associated with gold mineralization in the Appalachian orogen of southwestern New Brunswick are recognized: a Late Silurian to Early Devonian (423–396 Ma) granodioritic to monzogranitic series (GMS), and a Late Devonian (370–360 Ma) granitic series (GS). The GMS granitoids are relatively low in silica, calc-alkaline, metaluminous to weakly peraluminous, and show characteristics of normal (oxidized) to reduced I-type granites depending on the properties of country rocks. They may have been derived from partial melting of lower crustal rocks triggered by underplated basaltic magmas; and country rocks bearing reduced organic carbon and/or graphite may have played an important role in the reduction of normal I-type intrusions to reduced I-type, which is essential in the formation of intrusion-related gold systems. In contrast, the GS granites, although calc-alkaline and metaluminous to peraluminous, are relatively rich in silica, incompatible elements, and high field strength elements. They are fractionated I-type granites, and are probably related to the coeval Mount Douglas granite in the Saint George batholith through fractional crystallization. Their parental magmas may have been derived from partial melting of quartzofeldspathic sources at relatively low temperatures. Both GMS and GS intrusions are orogenic, although some of them display the affinity of those emplaced into a within-plate environment. The origin of intrusion-related gold systems in this region appears to be controlled by several factors, including magma sources, magmatic processes, redox conditions (country-rock nature), and local structural regimes.     

Surface texture analysis of southern Tuli Basin sediments: Implications for Limpopo Valley geoarchaeological contexts

The Hackthorne 1 site (southern Tuli Basin, South Africa) is situated on a sand-covered plateau adjacent to the Limpopo River Valley. Although the site is well known for its Stone Age archaeology, the past environmental contexts (particularly sedimentological/geomorphological) are not well known. We examine the Hackthorne sand grain surface textures, so as to provide some insight on the site specific and regional depositional history. Quartz sands at Hackthorne were collected from surface sands and from underlying weathered calcrete. SEM analysis was performed on sand grains, through which several mechanical and chemical microtextures were identified. Microtextures typical of fluvial environments were found only on grains derived from the plateau calcrete host sediment, whilst the surface sands exhibited only textures associated with aeolian environments. The results indicate that the calcrete host sediment is composed of alluvium, and that the surface sands mantling the Hackthorne Plateau are not deflated from the alluvial deposits in the Limpopo Valley, but may rather be derived from distant aeolian sources. The deposition of aeolian sands is consistent with OSL dates which place sand deposition, or remobilization, at 23 and 15 kya, periods in southern Africa associated with increased aridity.     

Selected chemical contaminants in surface sediments of Commencement Bay and the Tacoma Waterways, Washington, USA

Eight metals, 21 organic priority pollutants, and 11 other contaminants and contaminant-related sediment characteristics were measured in surface sediments (upper 2 cm) at 21 locations in Commencement Bay and the Tacoma Waterways, Washington. Summary statistics were calculated and statistical approaches (analysis of variance, multiple comparisons tests, cluster analysis and principal component analysis) were applied to subsets of the data to classify sediment contamination. Overall sediment contamination was highest in the Sitcum, City and Hylebos Waterways, intermediate in Commencement Bay, at the entrances to the Tacoma Waterways and in the outer reaches of the Blair and Hylebos Waterways, and lowest at the Blair Waterway turning basin, the mouth of the Puyallup River and at a reference site near Browns Point. High concentrations of some contaminants appeared to be related to proximity to sources of contaminants. Depositional vectors, and chemical adsorption processes may also influence the spatial distribution of sediment contamination in the study area.Results of simple and partial correlation analyses indicate that arsenic, iron and manganese may be more closely associated with the clay fraction, while cadmium, copper and polynuclear aromatic hydrocarbons may be more closely associated with the total organic carbon content of sediments. We were unable to discriminate statistically between the affinity of chromium, lead, zinc and phthalates with the % clay or the total organic carbon content of sediments.     

The role of the Spitsbergen shear zone in determining morphology,segmentation and evolution of the Knipovich Ridge

In 1989–1990 the SeaMARC II side-looking sonar and swath bathymetric system imaged more than 80 000 km² of the seafloor in the Norwegian-Greenland Sea and southern Arctic Ocean. One of our main goals was to investigate the morphotectonic evolution of the ultra-slow spreading Knipovich Ridge from its oblique (115° ) intersection with the Mohns Ridge in the south to its boundary with the Molloy Transform Fault in the north, and to determine whether or not the ancient Spitsbergen Shear Zone continued to play any involvement in the rise axis evolution and segmentation. Structural evidence for ongoing northward rift propagation of the Mohns Ridge into the ancient Spitsbergen Shear Zone (forming the Knipovich Ridge in the process) includes ancient deactivated and migrated transforms, subtle V-shaped-oriented flank faults which have their apex at the present day Molloy Transform, and rift related faults that extend north of the present Molloy Transform Fault. The Knipovich Ridge is segmented into distinct elongate basins; the bathymetric inverse of the very-slow spreading Reykjanes Ridge to the south. Three major fault directions are detected: the N-S oriented rift walls, the highly oblique en-echelon faults, which reside in the rift valley, and the structures, defining the orientation of many of the axial highs, which are oblique to both the rift walls and the faults in the axial rift valley. The segmentation of this slow spreading center is dominated by quasi stationary, focused magma centers creating (axial highs) located between long oblique rift basins. Present day segment discontinuities on the Knipovich Ridge are aligned along highly oblique, probably strike-slip faults, which could have been created in response to rotating shear couples within zones of transtension across the multiple faults of the Spitsbergen Shear Zone. Fault interaction between major strike slip shears may have lead to the formation of en-echelon pull apart basins. The curved stress trajectories create arcuate faults and subsiding elongate basins while focusing most of the volcanism through the boundary faults. As a result, the Knipovich Ridge is characterized by Underlapping magma centers, with long oblique rifts. This style of basin-dominated segmentation probably evolved in a simple shear detachment fault environment which led to the extreme morphotectonic and geophysical asymmetries across the rise axis. The influence of the Spitsbergen Shear Zone on the evolution of the Knipovich Ridge is the primary reason that the segment discontinuities are predominantly volcanic. Fault orientation data suggest that different extension directions along the Knipovich Ridge and Mohns Ridge (280° vs. 330°, respectively) cause the crust on the western side of the intersection of these two ridges to buckle and uplift via compression as is evidenced by the uplifted western wall province and the large 60 mGal free air gravity anomalies in this area. In addition, the structural data suggest that the northwards propagation of the spreading center is ongoing and that a `normal' pure shear spreading regime has not evolved along this ridge. This revised version was published online in November 2006 with corrections to the Cover Date.     

The distribution of geothermal fields along the East Pacific Rise from 13°10′ N to 8°20′ N: Implications for deep seated origins

In 1983 a combined SeaMARC I, Sea Beam swath mapping expedition traversed the East Pacific Rise from 13°20 N to 9°50 N, including most of the Clipperton Transform Fault at 10°15 N, and a chain of seamounts at 9°50 N which runs obliquely to both the ridge axis and transform fault trends. We collected temperature, salinity and magnetic data along the same track. These data, combined with Deep-Tow data and French hydrocasts, are used to construct a thermal section of the rise axis from 13°10 N to 8°20 N.Thermal data collected out to 25 km from the rise axis and along the Clipperton Transform Fault indicate that temperatures above the rise axis are uniformly warmer by 0.065°C than bottom water temperatures at equal depths off the axis. The rise axis thermal structure is punctuated by four distinct thermal fields with an average spacing of 155 km. All four of these fields are located on morphologic highs. Three fields are characterized by lenses of warmed water 20 km in length and 300 m thick. Additional clues to hydrothermal activity are provided in two cases by high concentrations of CH₄, dissolved Mn and ³He in the water column and in another case by concentrations of benthic animals commonly associated with hydrothermal regions.We use three methods to estimate large-scale heat loss. Heat flow estimates range from 1250 MW to 5600 MW for one thermal field 25 km in length. Total convective heat loss for the four major fields is estimated to lie between 2100 MW and 9450 MW. If we add the amount of heat it takes to warm the rest of the rise axis (489 km in length) by 0.065.°C, then the calculated axial heat loss is from 12,275 to 38,525 MW (19–61% of the total heat theoretically emitted from crust between 0 and 1 m.y. in age).