Fluid inclusion and stable isotope characteristics of the Karalar (Gazipaşa,Antalya) barite-galena deposits,Southern Turkey

The Karalar galena-barite deposits are typical examples of the carbonate-hosted barite-galena deposits widely occurring in the Central Tauride Belt. These deposits are located in Permian limestones as ore veins along fault zones that are discordant to the bedding planes and as thin veinlets within hardly brecciated bottom zones of Permian limestones. The ore deposits contain mainly barite and galena and small amounts of sphalerite, pyrite, fahlore, limonite, quartz, and calcite. Barites occur during the earlier episode of mineralization and were mylonitized before the formation of galena. Galena and other minerals occur epigenetically with barite along porous zones between brecciated barite crystals and are especially abundant in the hardly mylonitized zones. Fluid inclusion studies indicate that the ore deposits of the area were developed by hydrothermal fluids with following characteristics: they contained NaCl, CaCl₂, and MgCl₂; the salinity of the fluids was relatively high and their temperature was low during the crystallization of barites in the earlier episode of mineralization; and the salinity of the fluids decreased and their temperature increased during the crystallization of sulfide minerals through the later episode of mineralization. δ₁₈O and the δD results indicate that the water in the mineralizing fluid was of meteoric origin. The deposits were formed by deep meteoric water circulating through marine sediments. Shallow circulating and slightly warmed fluids dissolved Ba and sulfate from marine sediments of the basement and transported them to the mineralization environment during the early episode, while deep circulating and more heated fluids dissolved Pb, Zn, and other elements from the basement and reached the environment during the later episode of mineralization. The text was submitted by the authors in English.     

Stable isotope study of antimony deposits in the Muratdagi region,western Turkey

The Muratdagi region is rich in antimony deposits having the following common characteristics: post Miocene age, location on the down-thrown blocks next to normal faults, in the vicinity of active or fossil thermal springs, and in contact with carbonate rocks. The isotopic composition of — 7. SMOW of the mineralizing fluid calculated from the measured ° ¹⁸O of quartz and the fluid inclusion microthermometry, is indicative of meteoric water origin. The ° ¹³C of the inclusion CO₂ of — 19.1 to — 25.4 PDB is indicative of interaction with organic material-graphite. The ° ³⁴S of stibnite — 3.6 to — 0.7 is, in view of the mineral assemblage, indicative of magmatic origin of the sulphur. A tightly confined set of structural, lithological, hydrological and geochemical features define a sequence of geochemical processes; formation of acid and reducing fluid, leaching and transport of antimony complexes and precipitation of stibnite within defined lithological units. The set of processes seems to have taken place within a space of 5000 m lateral and 1000 m vertical extension.     

Damage risk assessment of breakwaters under tsunami attack

Turkey was struck by two major events on 17 August and 12 November 1999, named Izmit (M _w = 7.4) and Düzce (M _w = 7.2) earthquakes, respectively. Rubble mound breakwaters in Izmit Bay experienced little damage, as forecasted by the new risk assessment model in which tsunami occurrence risk was included in the damage estimations. In order to determine the occurrence probability of structural damage under design conditions, including the environmental loading parameters of tsunami and storm waves, tidal range and storm surge, the Conditional Expections Monte Carlo simulation was applied in the risk assessment model developed in this study for the Esenköy Fishery Harbour, Turkey. A tsunami was not the key design parameter when compared to storm waves for the main breakwater of the harbour, however, in places with great seismic activity, the tsunami risk should be important depending on the occurrence probability and magnitude of the tsunami.     

Weathering characteristics of arctic islands in northern Norway

The arctic islands of the Lofoten-Vesterålen archipelago in northern Norway have a wide distribution of weathered land surfaces commonly located above 250 m with several apparent similarities. In order to investigate the characteristics of (deep) weathering in this region, northern Langøya and Hadseløya were chosen for in-depth analyses. Eight weathering profiles were excavated from various surfaces, and the stratigraphies were logged in detail. Material was collected throughout the weathering horizons, and all samples were subsequently analysed for clay mineralogy (< 63 μm fraction) and grain size distribution. The sampling strategy was complemented by samples from additional saprolites and other landforms such as moraines and rock glaciers. The XRD results indicate that the presence of secondary minerals, such as gibbsite (Al(OH)₃) and kaolinite (Al₂Si₂O₅(OH)₄), are very common throughout the profiles. Gibbsite is an extreme end product of silicate weathering and usually associated with a warmer and more humid climate, as found in Scandinavia during the Tertiary. The grain size analyses (< 63 μm) show that the finer silt fractions (< 8 μm) tend to be high in the profiles (20–40%), with significant amounts of clay (5–15%) demonstrating that the regolith itself is susceptible to frost sorting mechanisms.¹⁰Be exposure dates from in situ quartz knobs on tors and boulders of local origin suggest > 40,000 years of subaerial conditions. Considering the steady surface erosion, this figure should be viewed as an absolute minimum age estimate. Mapping of the superficial sediments and geomorphological features of the study areas has revealed several common morphological features, which indicate dominance of glacial and periglacial processes in the areas lying below the lower boundary of blockfields (c. 250 m). The weathering mantles are not a periglacial end product, but rather a relict tertiary landform that were modulated by permafrost processes as well as biological processes at later stages. The regolith cover constrain the vertical extension of warm-based Quaternary ice sheets challenging the notion of a parabolic ice mass consuming every mountain top of Lofoten and Vesterålen.     

Patterns in the Turkish reinsurance claim data, 1998–2002: An application of the extreme value theory

The devastating 1999 Marmara and Düzce earthquakes led to a significant increase in the earthquake studies in Turkey in geological, engineering and financial aspects. Extreme Value Theory (EVT) has a range of applications from stock market changes to natural disasters like floods and hurricanes. Here EVT is fitted to the ordinary and earthquake reinsurance claims of Turkey.     

Back-analysis of a seismically induced highway embankment failure during the 1999 Düzce earthquake

An earthquake of magnitude 7.2 on the Richter scale occurred on 12 November 1999 in the Düzce-Bolu region of Turkey. The region was also hit approximately 3 months before during the devastating Kocaeli earthquake of 17 August 1999. Besides high casualties and damage to various engineering structures and buildings, slope and embankment failures on the highway and the country roads occurred. In this study, the authors are concerned with the back-analysis of an embankment failure that occurred on the four lanes E-5 highway connecting Ankara to Gstanbul at Bakacak in the Bolu Province during the 1999 Düzce earthquake. Both pseudo-dynamic and dynamic limiting equilibrium methods are used to back analyse the conditions for the initiation of failure and also displacement responses of the embankment during the earthquake shaking. After having given a brief summary of the investigations on the post-failure state, the geology and geotechnical characteristics of the site, and the dynamic limiting equilibrium method developed and used for analyses are described. The results of the back-analysis based on a pseudo-dynamic approach, revealed that the maximum ground acceleration to initiate the failure of the embankment was probably about 0.125 g. On the other hand, the application of a method for computing the displacement and velocity responses of the failed embankment showed that the failure was possible when the embankment was subjected to ground accelerations similar to that recorded at the Düzce station. In addition, the computations also revealed that the time history of accelerations could be very important for the failure of slopes and embankments.     

The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.     

基于DEM的分布式水文模型构建方法

基于 DEM的分布式水文模型是现代水文学同高科技 (如计算机技术、 3S技术等 )相结合的产物 ,是研究变化环境下水文循环与水资源演化规律的理想工具 ,代表了水文模型的最新发展方向。从 DEM的特性出发 ,本文探讨并总结了分布式水文模型的特点、建模思路和模型基本结构框图。在流域离散化方面 ,重点介绍了分布式水文模型常用的三种单元划分方法 ;最后 ,针对分布式水文模型构建问题 ,从“输入模块”、“单元水文模型”、“河网汇流模型”三方面 ,阐述了分布式水文模型微结构构建方法。