Simulating the effects of land use changes on soil erosion using RUSLE model

The aim of this paper is to evaluate the impacts of land use change on soil loss. Soil loss was quantified using the revised universal soil loss equation model in Darabkola catchment. Land use maps of 1992, 1998 and 2012 were derived from Landsat Thematic Mapper data. The mean annual soil loss was therefore determined for these years. The results showed open-canopy forest area decreased by 36% between 1992 and 1998. Likewise, the decreasing trend of forest lands which are near to residential areas has continued from 1795 ha in 1998 to 1765 ha in 2012. Also the results indicate that the maximum annual soil loss ranged from 5.06, 6.19 and 15.23 ton h^?1 y^?1 in 1992, 1998 and 2012, respectively. Also, by assuming that all watershed conditions and land uses be constant in the future, then the area of close- and open-canopy forest and dry agricultural lands will be 23.23, 2.88 and 29.89 ha in 2040, respectively.     

Evaluation of compression index of marine fine-grained soils by the use of index tests

Marine fine-grained soils are well known for their compressibility, which is typically measured and reported in terms of compression index, C_c. The difficulties associated with measuring C_c have resulted in growing research interest in statistics-based estimates (i.e., correlation equations). Although many empirical and semiempirical correlations exist for estimating C_c, most available correlations are based on either data from nonmarine soils or data collected from Japanese and Korean marine clays. Thus, there are few correlations for marine clays from other parts of the world. In the present study, two independent databases which contain a total of 1,000 data points from 170 different sites worldwide are used to build and validate statistically significant correlations for estimating compression index of marine soils. The results of this study suggest that (1) the proposed correlation equations provide quite good estimates of C_c for marine soils with different stress histories and sensitivities and (2) most of the existing models have unacceptable performance when they are applied to marine soils.     

Fish assemblages and rapid colonization after enlargement of an artificial reef off the Algarve coast (Southern Portugal)

Artificial reefs (ARs) have been deployed in Algarve (Southern Portugal) coastal waters to contribute to the sustainability of local nearshore fisheries. Herein, we describe the colonization process of the recently deployed Faro/Ancão AR, and assess the time until the fish assemblage reaches stability and their seasonal patterns. In addition, we compare the results from the present study with those previously reported for an older AR. The fish assemblages were monitored monthly over a 2‐year period by means of visual census. A rapid increase in fish colonization occurred within the first 4 months. After this initial period the assemblage structure showed high similarity (> 73%). The high rate of colonization of the AR was related to the maturity already achieved by the nearby 14‐year‐old AR and to the fish migration from the Ria Formosa lagoon, a nearby nursery habitat. The reef fish assemblage structure showed a seasonal pattern, mainly associated with recruitment episodes of occasional demersal species (Boops boops, Trachurus trachurus and Pagellus spp.) in spring and summer. A total of 66% of the species found in AR are of commercial and recreational importance. The overall mean density and biomass were 2.8 ind·m^?3 and 207 g·m^?3. The occasional demersal species accounted for 42% of the fish density. The most important species in terms of biomass belong to the Sparidae family along with Dicentrarchus labrax. The fish assemblage of the new ARs showed higher mean number of species, diversity, density and biomass values than those reported for the older AR. This result was associated with enlargement of the AR area and with the fishing exploitation of the isolated, small and patchy old AR. Moreover, the high biomass values recorded in the new ARs were mainly due to the increased density of D. labrax after AR enlargement. The results of the present study are used to define guidelines for suitable management strategies for the AR areas that are exploited by the local commercial and recreational fisheries.     

Long-Term and Short-Term Variations of Sea Level in Eastern Canada: A Review

This is a review of sea level data performed at three selected stations (Québec-Lauzon, Harrington Harbour,and Halifax) in eastern Canada in order to investigate the seasonal trends and other long-term and short-term changes which occurred since the beginning of the 20th century. Stations situated in riverine or estuarine regions (e.g., Québec-Lauzon) are significantly affected by freshwater flow in their annual cycle of sea level changes and exhibit a definite maximum in spring and minimum in autumn-winter. Other stations situated in the eastern half of the Gulf of St. Lawrence (e.g., Harrington Harbour) or near the open Atlantic coast (Halifax) mainly follow the general cycle of subarctic regions, with lows in spring-summer and highs in autumn-winter. Such seasonal variations appear to be related to the atmospheric pressure and baroclinic current variations. Secular trends in mean sea level in eastern Canadian waterbodies show a mean rise of about 2.56 mm/yr -1 due to tectonic motions, that is, land subsidence. At several stations in eastern Canada, evidence is found for the influence of the nodal tide (18.6 years), the sunspot cycle (10.8 years), the lunar perigee (8.47 years), the pole tide (14.5 months), the annual cycle (12 months), and semiannual tidal cycle (6 months) in sea level records. Beside long-term oscillations with periods of more than one year, evidence is found for high energetic semidiurnal and diurnal tides where they contribute largely (from 90-95%) to short term variability of sea level. In the residual signal (variations of sea level--tidal variations), short-term variations between 2 to 30 days can be attributed to meterological forcing (atmospheric pressure and winds), longitudinal seiches (2-10 h), atmospheric tides (12 h and 24 h) and inertial oscillations (16-18 h). A regressive model showed that the water discharge from the St. Lawrence River contributes 29% to the monthly residual sea level at Québec-Lauzon. The atmospheric pressure and winds contribute respectively 8.1% and 8.9% at this station. They contribute 52.1% and 7.7% at Harrington Harbour and 41.8% and 14.3% at Halifax. The regression coefficients of residual sea level on atmospheric pressure are respectively estimated to be -1.507 cm. ( hPa ) -1 ( - 0.345 cm. ( hPa ) -1 ), -0.776 cm. ( hPa ) -1 ( - 0.112 cm. ( hPa ) -1 ) and -0.825 cm. ( hPa ) -1 ( - 0.008 cm. ( hPa ) -1 ) at the three stations. Compared to the coefficient of the inverted barometer, estimated to be -1 cm. ( hPa ) -1 , these effects of the atmospheric pressure on sea level variations seem to be amplified at Que´bec-Lauzon by the wind effects (and water discharge) while they are reduced at Harrington Harbour and Halifax.     

A coupled numerical model for simulation of wave breaking and hydraulic performances of a composite seawall

A numerical model is developed by combining a porous flow model and a two-phase flow model to simulate wave transformation in porous structure and hydraulic performances of a composite type low-crest seawall. The structure consists of a wide submerged reef, a porous terrace at the top and an impermeable rear wall. The porous flow model is based on the extended Navier-Stokes equations for wave motion in porous media and k−ε turbulence equations. The two-phase flow model combines the water domain with the air zone of finite thickness above water surface. A unique solution domain is established by satisfying kinematic boundary condition at the interface of air and water. The free surface advection of water wave is modeled by the volume of fluid method with newly developed fluid advection algorithm. Comparison of computed and measured wave properties shows reasonably good agreement. The influence of terrace width and structure porosity is investigated based on numerical results. It is concluded that there exist optimum value of terrace width and porosity that can maximize hydraulic performances. The velocity distributions inside and in front of the structure are also investigated.     

Quantifying the role of sandy–silty sediments in generating slope failures during earthquakes: example from the Algerian margin

The Algerian margin is a seismically active region, where during the last century, several large magnitude earthquakes took place. This study combines geotechnical and sedimentological data with numerical modelling to quantitatively assess the present-day slope stability of the Algerian margin. Geotechnical laboratory tests, such as cyclic triaxial tests, oedometric tests and vane shear tests were carried out on sediment cores collected on the study area. The liquefaction potential of a sediment column located about 30 km from the Boumerdès earthquake epicentre of 21st May 2003 was evaluated theoretically for an earthquake of M _w  = 6.8. We show that thin sand and silt beds such as those described on recovered sediment cores are the main cause of sediment deformation and liquefaction during earthquakes. Numerical calculations showed that the slope failure may occur during an earthquake characterised by a PGA in excess of 0.1g, and also that, under a PGA of 0.2g liquefaction could be triggered in shallow silty–sandy deposits. Moreover, comparison of the predicted slope failure with failure geometries inferred from seafloor morphology showed that earthquakes and subsequent mass movements could explain the present-day morphology of the study area.     

Sexual reproduction of Hippospongia communis (Lamarck, 1814) (Dictyoceratida,Demospongiae): comparison of two populations living under contrasting environmental conditions

The study of the reproductive processes of benthic invertebrates is essential to the understanding of their population dynamics and is also important in formulating conservation plans, especially for exploited species. The sexual reproduction of Hippospongia communis, the ‘honeycomb’ bath sponge, was studied at two locations in the Mediterranean Sea: the Kerkennah Islands (Tunisia, South Mediterranean), where the mean annual seawater temperature is 19 °C, and Marseille (France, Northwestern Mediterranean Sea), where the mean annual water temperature is 16 °C. The aim of this comparative study was to determine whether different environmental conditions could affect reproduction patterns. At both locations, H. communis was found to contain sexual reproductive elements year‐round. Oogenesis and embryogenesis occurred throughout the year, whereas spermatogenesis occurred during shorter periods between October and November, in both populations. While gametogenesis seemed to be synchronized, indicating that fertilization could occur at the same time at both locations, spawning was observed in late summer in Marseille, whereas it started in late spring for the Kerkennah population. Larval development of H. communis seems to take longer for sponges living at cooler locations such as Marseille. Reproductive effort calculated for both sexes showed significantly higher values for specimens from Kerkennah Islands. By comparing sexual reproductive patterns of populations living in two contrasted environments, we suggest that a change of thermal regime can affect H. communis phenology.     

Implementation of method of lines to predict water levels due to a storm along the coastal region of Bangladesh

In this study, the method of lines (MOL) has been applied to solve two-dimensional vertically integrated shallow water equations in Cartesian coordinates for the prediction of water levels due to a storm surge along the coast of Bangladesh. In doing so, the partial derivatives with respect to the space variables were discretized by the finite difference (central) method to obtain a system of ordinary differential equations (ODEs) with time as independent variable. The classical fourth-order Runge–Kutta method was used to solve the obtained system of the ODEs. We used a nested finite difference scheme, where a high resolution fine grid model (FGM) capable of incorporating all major islands along the coastal region of Bangladesh was nested into a coarse grid model (CGM) covering up to 15°N latitude of the Bay of Bengal. The boundaries of the coast and islands were approximated through proper stair step. Appropriate tidal condition over the model domain was generated by forcing the sea level to be oscillatory with the constituent M ₂ along the southern open boundary of the CGM omitting wind stress. Along the northeast corner of the FGM, the Meghna River discharge was taken into account. The developed model was applied to estimate water levels along the coast of Bangladesh due to the interaction of tide and surge associated with the April 1991 storm. We also computed our results employing the standard finite difference method (FDM). Simulated results show the MOL performs well in comparison with the FDM with regard to CPU time and stability, and ensures conformity with observations.     

Metasomatism and graphite formation at a lithological interface in Malaspina (Alpine Corsica, France)

Multiple pieces of geologic evidence suggest that interfaces between contrasted lithologies exert a strong control on the fate of volatiles in subduction zones. Here we present results from a contact between serpentinites and sediments, located in Corsica and metamorphosed in the blueschist facies during the alpine orogeny. It was shown previously that carbonates in the sediments have been reduced to graphitic carbonaceous material within a 5–10-cm-thick reaction zone at the contact with serpentinites. In an effort to investigate the mechanisms governing this unusual process, bulk rock geochemical analyses incorporating a statistical analysis of compositional data are presented. Observations show that the fate of C was decoupled from that of other elements such as O, H, and large-ion lithophile elements—e.g. K, Sr, Ba...,As—that were extensively leached from the reaction zone. Notably, Na is strongly enriched in the reaction zone and structurally linked to pectolite. Reducing conditions, manifested by the depletion of O in the reaction zone compared to the bulk metasediment, were likely maintained by the presence of Fe(II) in the serpentinite. Moreover, thermodynamic calculations show that the low solubility of carbon in COH fluids at high-pressure and low-temperature conditions was the main driver for graphite precipitation synchronously with carbonate destabilization. This may have been kinetically favored by the presence of already existing graphitized carbonaceous material and phengite in the metasediment. Limited lateral flow might have contributed as well to the geochemical and petrological patterns observed in these rocks.     

Hydrological modelling of the Chaohe Basin in China: Statistical model formulation and Bayesian inference

Calibration of hydrologic models is very difficult because of measurement errors in input and response, errors in model structure, and the large number of non-identifiable parameters of distributed models. The difficulties even increase in arid regions with high seasonal variation of precipitation, where the modelled residuals often exhibit high heteroscedasticity and autocorrelation. On the other hand, support of water management by hydrologic models is important in arid regions, particularly if there is increasing water demand due to urbanization. The use and assessment of model results for this purpose require a careful calibration and uncertainty analysis. Extending earlier work in this field, we developed a procedure to overcome (i) the problem of non-identifiability of distributed parameters by introducing aggregate parameters and using Bayesian inference, (ii) the problem of heteroscedasticity of errors by combining a Box–Cox transformation of results and data with seasonally dependent error variances, (iii) the problems of autocorrelated errors, missing data and outlier omission with a continuous-time autoregressive error model, and (iv) the problem of the seasonal variation of error correlations with seasonally dependent characteristic correlation times. The technique was tested with the calibration of the hydrologic sub-model of the Soil and Water Assessment Tool (SWAT) in the Chaohe Basin in North China. The results demonstrated the good performance of this approach to uncertainty analysis, particularly with respect to the fulfilment of statistical assumptions of the error model. A comparison with an independent error model and with error models that only considered a subset of the suggested techniques clearly showed the superiority of the approach based on all the features (i)–(iv) mentioned above.