Management of shock loads wastewater produced from water heaters industry

Water heater manufacturing represents one sector of household electrical appliance industry. It includes several batch processes which resulted in a highly polluted wastewater as shock loads. The objective of this study was to manage the shock loads wastewater with a simple and cost-effective approach prior to final discharge into municipality. To achieve this objective, two approaches were studied. The first approach was the chemical treatment of the accumulated shock loads wastewater using alum and an anionic polymer. Although this approach produced a very high-quality effluent, it was economically and technically infeasible. The second approach was a controlled release of the shock loads to the normal daily discharge in a way that guarantees the compliance of the end-off-pipe with the National Regulatory Standards. This solution required establishment of an equalization tank for normal daily flow and a holding tank for controlled release of the shock loads. Mathematical calculations were carried out to determine the most violating parameters in order to calculate the mixing ratio the of shock loads with the normal daily flow. Full engineering design of the proposed solution was carried out. This approach was implemented and proved to be simple, easy to operate, cost-effective and can be replicated in similar batch processing manufacturing plants.     

Geotechnical investigation of the El-Elb dam site,northwest Riyadh,Saudi Arabia,using 2D resistivity and ground-penetrating radar techniques

In the present study, the existence of cavities, voids, and fractures was verified at the site of the El-Elb Dam, which is located to the northwest of Riyadh City across Wadi Hanifa, using 2D electrical resistivity tomography (ERT) and ground-penetrating radar (GPR) techniques. For this purpose, four ERT profiles were measured on the downstream side of the El-Elb Dam using the Syscal Pro Switch-72 resistivity meter. In addition, a GPR survey using a 400-MHz antenna and a SIR-3000 instrument was conducted along five profiles above the stilling basins on the downstream side of the dam and one radar profile was measured outside the stilling basins area across the course of the wadi. The resultant geophysical data were interpreted with the aid of information from a field-based structural and stratigraphic evaluation of the outcropped bedrock on the banks of the wadi course. The analysis of the inverted ERT and filtered radar sections revealed several resistivity and electromagnetic reflection anomalies that are identified laterally and vertically across the measured sections. These anomalies indicate the presence of fractures and karst features affected the limestone bedrock in the dam site. These near-surface karstified and fractured strata represent a critical hazard to the structural safety of the dam.     

Red Sea faulting and salt diapirism as a potential geotechnical hazard in Jazan,southwest Saudi Arabia: inferences from gravity data

Natural Hazards - The main objective of this study is to detect the subsurface extension of salt diapirs and structural deformations in the city of Jazan and its suburbs using gravity data. Salt...     

Modelling the Shimokita deep coalbed biosphere over deep geological time: Starvation,stimulation, material balance and population models

Basin models can simulate geological, geochemical and geophysical processes and potentially also the deep biosphere, starting from a burial curve, assuming a thermal history and utilizing other experimentally obtained data. Here, we apply basin modelling techniques to model cell abundances within the deep coalbed biosphere off Shimokita Peninsula, Japan, drilled during Integrated Ocean Drilling Program Expedition 337. Two approaches were used to simulate the deep coalbed biosphere: (a) In the first approach, the deep biosphere was modelled using a material balance approach that treats the deep biosphere as a carbon reservoir, in which fluxes are governed by temperature-controlled metabolic processes that retain carbon via cell-growth and cell-repair and pass it back via cell-damaging reactions. (b) In the second approach, the deep biosphere was modelled as a microbial community with a temperature-controlled growth ratio and carrying capacity (a limit on the size of the deep biosphere) modulated by diagenetic-processes. In all cases, the biosphere in the coalbeds and adjacent habitat are best modelled as a carbon-limited community undergoing starvation because labile sedimentary organic matter is no longer present and petroleum generation is yet to occur. This state of starvation was represented by the conversion of organic carbon to authigenic carbonate and the formation of kerogen. The potential for the biosphere to be stimulated by the generation of carbon-dioxide from the coal during its transition from brown to sub-bituminous coal was evaluated and a net thickness of 20 m of lignite was found sufficient to support an order of magnitude greater number of cells within a low-total organic carbon (TOC) horizon. By comparison, the stimulation of microbial populations in a coalbed or high-TOC horizon would be harder to detect because the increase in population size would be proportionally very small.     

Structure and distribution of the benthic macrofauna on a Northwest African sandy beach close to a freshwater river discharge

The effects of the freshwater discharge of the Oued Sebou River on the macroinfauna, was studied on the sandy beach of Mehdia through the analysis of the abiotic parameters and of the macrozoobenthos. In autumn 2002 and spring 2003, three beach sites, each with two transects, localized at 50, 3500 and 5720 m from the river mouth respectively, were studied. Positive correlations were recorded for beach slope and pH whereas negative ones were obtained for organic matter content and salinity at increasing distances from the river mouth. Significant differences between beach sites and seasons occurred for median grain size, organic matter content and pH. For each beach site, mean macroinfauna abundance varied between 30 and 100 ind.·m⁻² and in spring there was a significant correlation between this parameter and the increasing distance from the river mouth. No significant correlation was instead found between species richness and the increasing distance, although the farthest beach site from the mouth had the highest number of species during both seasons. The results indicated the importance of organic matter content and salinity for the macrofaunal abundance whereas the diversity indices were more affected by beach slope and grain size. The results showed that there was no clear spatial trend in compound indices of the macrofauna across the sampled sites and the influence of the river discharge of Sebou River did not seem to be significant and consistent on the macrobenthos of this mesotidal shore. Comparison with microtidal shores revealed the influence of the tidal excursion and swell characteristics on the response of the benthic structures of sandy beaches to discharges of freshwater.     

Impacts of tourism development on the physical environment of Mussoorie,a hill station in the lower Himalayan range of India

Tourism in mountainous regions is a significant source of revenue generation. However, it has also been associated with many adverse environmental consequences. This study aims at assessing the negative impacts of the incessant upsurge in tourism development on the physical environment of Mussoorie, a well-known mountain tourist destination in India. The impact indicators for the region were identified and assessed by qualitative and quantitative analysis of field observations. The observations indicated the aggravation of traffic congestion, atmospheric pollution, undisposed solid waste, water scarcity and infrastructure unavailability as the prevalent issues, especially during the peak tourist months. The extent of the consequential damage to the environment was evaluated by conducting an assessment of tourism-induced human disturbance on the natural landscape of the town. Slope, slope aspect, vegetation cover, road network and drainage network were incorporated as the determining landscape attributes to prepare thematic maps of landscape quality (perceivable intrinsic properties) and landscape fragility (vulnerability to anthropogenic disturbances) using GIS technique. An absorption capacity map was finally prepared to characterize the study area into regions of different conservation needs. The results identified the need for planning appropriate preservation strategies for different tourist places in the town. The study can be used by the policy makers for implementing the regulatory measures against potential disturbances due to mass-tourism.     

Modelling of groundwater flow in heterogeneous porous media by finite element method

The HySuf‐FEM code (Hydrodynamic of Subsurface Flow by Finite Element Method) is proposed in this article in order to estimate the spatial variability of the transmissivity values of the Berrechid aquifer (Morocco). The calibration of the model is based on the hydraulic head, hydraulic conductivity and recharge. Three numerical tests are used to validate the model and verify its convergence. The first test case consists in using the steady analytical solution of the Poisson equation. In the second, the model has been compared with the hydrogeological system which is characterized by an unconfined monolayer (isotropic layer) and computed by using PMWIN‐MODFLOW software. The third test case is based on the comparison between the results of HySuf‐FEM and the multiple cell balance method in the aquifer system with natural boundaries case. Good agreement between the Hydrodynamic of Subsurface Flow, the numerical tests and the spatial distribution of the thickening of the hydrogeological system is deduced from the analysis and the interpretations of hydrogeological wells. Copyright © 2011 John Wiley & Sons, Ltd.     

Evaluation of antifouling properties of non-toxic marine paints

The most common way to prevent biofouling of immersed surfaces is to coat the exposed surfaces with a paint containing a biocide acting on marine organisms by diffusion into the surrounding water. However diffusion of toxins into the marine environment causes pollution and serious economic problems. This paper outlines the anti-microfouling properties of some insolubilized quaternary ammonium salts (grafted onto a vinyl copolymer by means of a covalent non-hydrolyzable bond). After immersion times in sea-water up to 4 months, the microbial cover was limited to bacterial forms, without microalgae or cyanobacteria as observed on the untreated, or tin-salt painted surfaces. Bacteria are mostly on unicell forms and numerous areas appear free of any microorganisms. As microbiofouling is an obligate step to macrofouling, this unleachable antifouling treatment could result in a prolonged protection.     

Quality of GPS point positioning by TI 4100 receiver

The quality of absolute positioning by the Global Positioning System, using the TI 4100 receiver is investigated. Using 30 min of pseudo-range measurements, the derived coordinates of four tracking stations are estimated with standard errors of the order of 1–9 m. The paper points out that point-positioning users should be aware of the quality of positions and to some extent of the various sources of error.