Extended Finite Element Method for the Analysis of Discontinuities in Rock Masses

The strength and deformability of rock mass primarily depend on the condition of joints and their spacing and partially on the engineering properties of rock matrix. Till today, numerical analysis of discontinuities e.g. joint, fault, shear plane and others is conducted placing an interface element in between two adjacent rock matrix elements. However, the applicability of interface elements is limited in rock mechanics problems having multiple discontinuities due to its inherent numerical difficulties often leading to non-convergent solution. Recent developments in extended finite element method (XFEM) having strong discontinuity imbedded within a regular element provide an opportunity to analyze discrete discontinuities in rock masses without any numerical difficulties. This concept is based on partition of unity principle and can be used for cohesive rock joints. This paper summarizes the mathematical frameworks for the implementation of strong discontinuities in 3 and 6 nodded triangular elements and also provides numerical examples of the application of XFEM in one and two dimensional problems with single and multiple discontinuities.     

SHRIMP zircon dating and Sm/Nd isotopic investigations of Neoproterozoic granitoids, Eastern Desert, Egypt

There is an increasing evidence for the involvement of pre-Neoproterozoic zircons in the Arabian–Nubian Shield, a Neoproterozoic crustal tract that is generally regarded to be juvenile. The source and significance of these xenocrystic zircons are not clear. In an effort to better understand this problem, older and younger granitoids from the Egyptian basement complex were analyzed for chemical composition, SHRIMP U–Pb zircon ages, and Sm–Nd isotopic compositions. Geochemically, the older granitoids are metaluminous and exhibit characteristics of I-type granites and most likely formed in a convergent margin (arc) tectonic environment. On the other hand, the younger granites are peraluminous and exhibit the characteristics of A-type granites; these are post-collisional granites. The U–Pb SHRIMP dating of zircons revealed the ages of magmatic crystallization as well as the presence of slightly older, presumably inherited zircon grains. The age determined for the older granodiorite is 652.5 ± 2.6 Ma, whereas the younger granitoids are 595–605 Ma. Xenocrystic zircons are found in most of the younger granitoid samples; the xenocrystic grains are all Neoproterozoic, but fall into three age ranges that correspond to the ages of other Eastern Desert igneous rocks, viz. 710–690, 675–650 and 635–610 Ma. The analyzed granitoids have (+3.8 to +6.5) and crystallization ages, which confirm previous indications that the Arabian–Nubian Shield is juvenile Neoproterozoic crust. These results nevertheless indicate that older Neoproterozoic crust contributed to the formation of especially the younger granite magmas.     

Quality of GPS point positioning by TI 4100 receiver

The quality of absolute positioning by the Global Positioning System, using the TI 4100 receiver is investigated. Using 30 min of pseudo-range measurements, the derived coordinates of four tracking stations are estimated with standard errors of the order of 1–9 m. The paper points out that point-positioning users should be aware of the quality of positions and to some extent of the various sources of error.     

Red Sea faulting and salt diapirism as a potential geotechnical hazard in Jazan,southwest Saudi Arabia: inferences from gravity data

Natural Hazards - The main objective of this study is to detect the subsurface extension of salt diapirs and structural deformations in the city of Jazan and its suburbs using gravity data. Salt...     

Physical model experiments for sediment supply to the old Rhine through induced bank erosion

A mobile-bed, undistorted physical model （1：40） has been used to investigate different sediment supply strategies to the Old Rhine through bank protection removal and modifications of groyne dimensions and configuration, which cause bank erosion. This trained channel was previously the main bed of the upper Rhine downstream of Basel （Switzerland）, but it has an artificially low flow regime since the construction of the Grand Canal d＇Alsace, a navigation canal, and a flow control dam at Kembs （France）. Training works and subsequent channel incision have also greatly reduced sediment transport rates and created a heavily armoured bed. The modelled pilot site has a groyne field on the left bank. Results show that the currently existing groynes at the site are not effective in creating high bank-side velocities conducive to bank erosion, even for flow rates significantly higher than the mean annual flow rate. The river bank has also proved to be more resistant than previously thought, allowing long stretches of bank protection to be safely removed. The physical model testing process has produced a new configuration for the groyne field, where two higher, larger island groynes are placed further apart than the three existing attached groynes. This innovative approach has proved effective, causing bank erosion for flow rates below the mean annual flow rate, with consistent erosion being observed. It has also been found that such a configuration does not pose a hazard for the Grand Canal d＇Alsace, which is situated next to the Old Rhine, through excessive bank erosion during high flow events.     

Studies on flow characteristics of coal–oil–water slurry system

Experiments were carried out to investigate the rheological properties of coal–oil–water suspension containing solids of different sizes. Two different coal samples with mean particle sizes of 120 mesh, 175 mesh and 220 mesh were used. The coal concentration was varied from 5% to 25% by weight. Sodium silicate has been used as an additive to study the behavior of the variation of average viscosity of the suspension. A generalized correlation has been developed to predict the average viscosity of suspension in terms of particle diameter of the coal, concentration of coal, viscosity of the suspending medium and the concentration of water. Experimental investigations revealed that coal–oil–water suspensions show an increase in the viscosity with decrease in coal size but with the addition of an additive, the average viscosity tends to decrease initially up to a certain optimum dosages and thereafter it increases with further addition of additives. Two empirical correlations are proposed for average viscosity of the coal–oil–water suspension, μ_sL in terms of physical properties of the solid and viscosity of the suspending medium with and without additives.     

Transport of moderately sorted gravel at low bed shear stresses: The role of fine sediment infiltration

A reliable estimation of sediment transport in gravel‐bed streams is important for various practical engineering and biological studies (e.g., channel stability design, bed degradation/aggradation, restoration of spawning habitat). In the present work, we report original laboratory experiments investigating the transport of gravel particles at low bed shear stresses. The laboratory tests were conducted under unsteady flow conditions inducing low bed shear stresses, with detailed monitoring of the bed topography using a laser scanner. Effects of bed surface arrangements were documented by testing loose and packed bed configurations. Effects of fine sediments were examined by testing beds with sand, artificial fine sand or cohesive silt infiltrated in the gravel matrix. Analysis of the experimental data revealed that the transport of gravel particles depends upon the bed arrangement, the bed material properties (e.g., size and shape, consolidation index, permeability) and the concentration of fine sediments within the surface layer of moving grains. This concentration is directly related to the distribution of fine particles within the gravel matrix (i.e., bottom‐up infiltration or bridging) and their transport mode (i.e., bedload or suspended load). Compared to loose beds, the mobility of gravel is reduced for packed beds and for beds clogged from the bottom up with cohesive fine sediments; in both cases, the bed shear stress for gravel entrainment increases by about 12%. On the other hand, the mobility of gravel increases significantly (bed shear stress for particle motion decreasing up to 40%) for beds clogged at the surface by non‐cohesive sand particles. Copyright © 2017 John Wiley & Sons, Ltd.     

Experiments on integral length scale control in atmospheric boundary layer wind tunnel

Accurate predictions of turbulent characteristics in the atmospheric boundary layer (ABL) depends on understanding the effects of surface roughness on the spatial distribution of velocity, turbulence intensity, and turbulence length scales. Simulation of the ABL characteristics have been performed in a short test section length wind tunnel to determine the appropriate length scale factor for modeling, which ensures correct aeroelastic behavior of structural models for non-aerodynamic applications. The ABL characteristics have been simulated by using various configurations of passive devices such as vortex generators, air barriers, and slot in the test section floor which was extended into the contraction cone. Mean velocity and velocity fluctuations have been measured using a hot-wire anemometry system. Mean velocity, turbulence intensity, turbulence scale, and power spectral density of velocity fluctuations have been obtained from the experiments for various configuration of the passive devices. It is shown that the integral length scale factor can be controlled using various combinations of the passive devices.     

Contribution de la gravimétrie à l'étude de la structure du bassin de Tadla (Maroc) : Implications hydrogéologiques

This study is based on the analysis and the interpretation of the gravity data of the Tadla basin. Its purpose is to increase the knowledge of this basin structure. A residual anomaly map was first calculated from the Bouguer anomaly data witch are strongly affected by a regional gradient. The computed map provides information on the ground density variation but it does not bring enough of new elements. Data filtering allows us to emphasize the structures affecting the basin. We chose the horizontal gradient coupled to the upward continuation techniques that permit to highlight news structures and to give information on their dip. The elaborated structural map of the study area constitutes a useful document for rationalizing the future groundwater exploration in the Tadla basin. To cite this article: A. Najine et al., C. R. Geoscience 338 (2006).     

Area Change and Thickness Variation over Pensilungpa Glacier (J&;K) using Remote Sensing

Accurate representations of the Earth’s surface in the form of digital elevation models (DEMs) are essential for a variety of applications in glaciological and remote-sensing research. In the present study area change and thickness variation over Pensilungpa glacier was attempted using remote sensing approach. It can be remarked that a net loss of 9.23 sq. km. which is 38% of the glacier area mapped in 1962 indicate a drastic change over the glacier area during 1962–2007. Estimation of glacier thickness change on Pensilungpa glacier based on ASTER DEM (2003) and Survey of India (SOI) contour based DEM (1962) indicated increase in the glacier elevation in the accumulation zone mainly by 30 to 90 m and similar reduction by 30 to 90 m in the ablation zone.