The shape of deep-water siliciclastic systems: A discussion

Deep-water siliciclastic systems are classified primarily on their shape as: submarine fans with well developed or poorly developed morphology, slope drapes, for example, over relatively stable basin margins, fault-scarp aprons, canyons and large channels, under-supplied sheet systems such as abyssal plains, non-fan ponded systems such as over-supplied perched basins, and fan deltas. Collectively, or separately, these systems may form sedimentary basin fills that can be over or under-supplied with respect to the sediment input although most systems will tend toward over-supply/overflow with time. Finally, the sum total of the siliciclastic systems and basins can be used to define the tectonic milieux such as passive, strike-slip and convergent margins.     

On the capsize performance of a discus buoy in deep sea breakers

The mode of capsize of a discus buoy in breaking waves is discussed. The results of model tests are given; these show that a judicious choice of mooring design can substantially reduce the chance of capsize. A comparison is made with the performance of the buoy on station.     

Ionic activity coefficients in aqueous mixtures of NaCl and MgCl2

Methods developed earlier, based on hydration numbers for individual ionic species, have been extended to the calculation of ionic activity coefficients in aqueous systems of two electrolytes MX and NX₂ with a common unhydrated anion (X⁻). The data required include the mean activity coefficients of MX and NX₂ in the mixtures, together with the osmotic coefficient. The procedure is illustrated by a calculation of γ_Na, γ_Mg, and γ_Cl in a mixture of NaCl and MgCl₂ closely approximating the composition of seawater with salinity of 35‰.     

Nocdap results: On the relationship of extreme waves and currents for design of offshore structures

Simultaneous wind, wave, and current data during 21 storms spanning four winters at Tromsøflaket (230 m depth) were analysed to determine joint probabilities of occurrence. Waves were measured with a Waverider Buoy, winds with a recording anemometer onboard a vessel and currents at up to five depths with Aandera RCM-4 current meters. Measured currents were filtered to separate tidal currents from residual currents. In most of the statistical analyses, the actual current profiles were replaced with a simplified “equivalent” profile (constant above 50 m depth) whose magnitude was chosen to give the same drag load on a single pile as the actual profile when both profiles were combined with wave orbital velocities. The data suggest that the equivalent current is weakly correlated with the wave height. Within the range of the data analysed, an in-line equivalent residual current of 30 cm sec⁻¹ is adequate for design drag force calculations.The data presented here are used to illustrate a procedure for data analysis and are not suitable for use as design criteria.     

Improved in situ gamma-ray transmission densitometer for marine sediments

The first-generation University of Illinois gamma-ray transmission densitometer, designed for the in situ measurement of sediment bulk density, was modified by incorporating in the detector probe (1) an Americium-241 alpha particle pulser and an anti-walk gain stabilization control to maintain better temperature stability and (2) a small power supply and a IC preamplifier to eliminate the need for a high-voltage coaxial cable between the detector and external signal conditioning electronics package. This second-generation Lehigh University system has been successfully deployed since 1971 in routine use from ships and submersibles in the Atlantic and Pacific Oceans and the Gulf of Mexico. Results are presented of system operations to (1) measure bulk density over the range of 1.2–1.8 Mg/m³ in the Hudson Canyon, (2) penetrate 1.9 m into the seafloor in the San Diego trough and, (3) be lowered to a water depth of 3.6 km in the Gulf of Mexico.     

Relationship between Shot-Induced Noise and Shot Interval in Seismic Refraction Experiments at Sea

Seismic noise induced by the seismic source during continuous profiling reduces the signal-to-noise ratio and hence the data quality. This noise is largely dependent on the shot interval. In this paper, the noise amplitude of refraction seismic records from a special experiment is analysed as a function of the shot interval. An empirical exponential relationship between mean peak noise amplitude and shot interval is deduced. By increasing the shot interval, the induced noise can be minimized on all successive records. This results in an improvement of the data, predominantly the signal-to-noise ratio. Because the seismic signal and the shot-induced noise have nearly the same spectra, the chance of improving the signal-to-noise ratio by stacking is significantly reduced.     

Transverse vibrations of a rectangular cantilever plate with thickness varying in a discontinuous fashion

A numerical solution is obtained for the title problem by means of the popular finite element method. An experimental investigation of the problem is also presented for plates of square planform. The agreement between theoretical and experimental values is very good in the case of the fundamental frequency, and reasonably good when the second and third normal modes of transverse vibration are considered. It is concluded that beneficial effects are obtained in the sense that one generates a lighter structural element with higher fundamental frequency of transverse vibration. Hence, dynamic stiffening is achieved.     

The Fauna of Floating Cyanobacterial Mats in the Oligohaline Eulittoral Zone off Hiddensee (South-west Coast of the Baltic Sea)

Abstract. The fauna — including macrofauna, meiofauna, and large ciliates — of floating cyanobacterial mats in a brackish shallow-water area was studied by analysing six 20 cm² pieces of mat. Although these microbial aggregations were scarcely 1 cm thick, their total meiofauna abundance was about five times as high as in the uppermost 4 cm of the adjacent sediment. The mat fauna was dominated by harpacticoids, although large ciliates, rotifers, nematodes, and oligochaetes were also markedly more abundant than in the sediment. All species occurring in the mats were members of the surrounding sediment fauna. Out of the 47 species found, only a few, among them predominantly the harpacticoid, Mesochra lilljeborgi B oeck , 1864, and the nematode Daptonema setosum ( bütschli , 1874), accounted for the majority of the individual abundance in the mats. Both are regularly found in sulphidic biotopes near Hiddensee. As SEM micrographs revealed, the oligochaete Paranais litoralis (O. F. M üller , 1788) and the harpacticoid Cletocamptus confluens (Schmeil, 1894) were apparently optimal substrates for dense lawns of cyanobacteria. This indicates possible close interactions between the meiofauna and these microbiota. The frequent predation of histophagous ciliates on nematodes and harpacticoids, which were probably weakened by oxygen deficiency and/or high sulphide concentrations, were not only a sign of a generally neglected pathway in the food chain, but also impressively emphasized the huge variety of interactions taking place between meio- and microfauna within this specific benthic microcosm. Because of their floating character, the mats can play an important role in the dispersal of benthic fauna.     

Time-domain simulation of large-amplitude response of floating platforms

Two numerical simulation models to predict large-amplitude motions of floating platforms are presented. The first method is based on the application of the relative-velocity formulation of Morison's equation for force calculations. The second method developed in this work uses the three-dimensional potential theory in time domain. In this method, both the Froude-Krylov and scattering forces are calculated by considering finite wave amplitude effects in random waves. The effect of various nonlinearities on the low-frequency motions and high-frequency tether-tension response of a tension leg platform are studied using these simulation models in conjunction with power spectral methods. The presence of current and the nonlinear drag force are observed to have a significant effect on the low-frequency motions and tether tensions.