Differential concentration of Technetium-99 (99Tc) in common intertidal molluscs with different food habits

Concentration of ⁹⁹Tc has been measured in fucoids and molluscs, sampled in a sheltered intertidal at the southwest coast of Norway from February to November 2006. The concentrations of ⁹⁹Tc in molluscs differed significantly between species. The filtering bivalve Mytilus edulis had the lowest concentrations with averages of 2.3-5.9 Bq kg⁻¹ d.w., while the herbivorous gastropods Littorinalittorina, Littorina obtusata and Patella vulgata had higher concentrations. P. vulgata and L. obtusata had the highest concentrations, 40-47 and 26-30 Bq kg⁻¹ d.w., respectively. L. obtusata has a specialized habit of living, and prefers to feed on fucoids. P. vulgata can graze extensively on the fucoid Ascophyllum nodosum when available. Fucoids are known to have very high uptake of ⁹⁹Tc, and this was also found in the present study. The high ⁹⁹Tc-concentrations of L. obtusata and P. vulgata are most likely due to their habit of feeding on fucoids.     

The mobilisation of sediment by demersal otter trawls

The mobilisation of sediment by towed demersal fishing gears has been related to the release of nutrients, benthic infaunal mortality and the resuspension of phytoplankton cysts and copepod eggs. Hence, to understand the broader environmental and ecological implications of demersal fishing, it is important to be able to estimate accurately the amount of sediment put into the water column by towed gears.Experimental trials were carried out in the Moray Firth, Scotland, to measure the quantity of sediment remobilised by trawl gear components. It is demonstrated, for a given sediment type, that there is a relationship between the hydrodynamic drag of the gear element and the mass of sediment entrained behind it. A better understanding of this relationship and the hydrodynamic processes involved will lead to the development of accurate predictive models and aid the design of fishing gears of reduced impact.     

钻孔千斤顶压裂测量技术的发展和原地测量

为了测量距地表1 000 m以下位置的地壳应力状态,我们研究并开发了钻孔千斤顶压裂技术.技术的原理是:当钻孔千斤顶对钻孔壁加载时,与钻孔轴向平行的方向将会产生两个相对的新裂隙;卸载之后,如果千斤顶对钻孔壁的同一个地方进行施压,这对裂隙将会再次张开.与钻孔轴向垂直的平面上的两个主应力的大小和方向分别是由重张压力和裂隙的方...     

基于钻孔截面变形方法(CBDM)测量岩石应力变化

本文发展了一种基于钻孔技术来监测岩石应力变化的钻孔截面变形法(CB-DM),该方法可以用来测量垂直于钻孔轴线的岩体的二维应力状态变化.本文通过载有激光位移传感器的样机,对该方法进行详细介绍,理论上分析测量结果的影响因子,证明该方法能够有效估测岩体的应力变化.     

与苏门答腊-安达曼特大地震相联系的板块边界形变

2004年12月26日的苏门答腊-安达曼地震是自现代空间大地测量和宽频带地震学出现以来发生的第一个巨大地震（矩震级Mw〉9．0）。它为研究这种巨大且罕见的事件的特性提供了前所未有的机会。我们根据在苏门答腊西北部的近场全球定位系统（GPS）的探测结果并结合原地和远处的珊瑚礁垂直运动的观测，对这次事件造成的地表位移进行了估计。结果表明，该地震是由范围长〉1500km、宽〈150km范围内的巽他俯冲巨型逆断层破裂造成的。巨型逆断层在苏门答腊北部的近海滑动超过了20m，大部分的滑动深度不超过30km。对比大地测量学和地震学推断的滑动分布，发现在500秒长破裂发生之后的1．5个月内，断层滑动增加了～30％。在我们再次布设GPS测点之前，有震的和无震的滑动都出现在了巨型逆断层的浅部，那里是亚齐大海啸的源头。滑动在断层东南缘的锡默卢岛之下沿走向突然尖灭，在该处地震成核，并且2002年的晚期在此曾发生过一次Mw=7．2级地震。此外，该边缘也与2005年3月28日Mw=8．7的尼亚斯-锡默卢地震破裂的最北端相邻接。     

Bashikaogong-Shimierbulake granitic complex, north Altun, NW China:Geochemistry and zircon SHRIMP ages

The Bashikaogong-Shimierbulake granitoid complex is about 30 km long and 2―6 km wide, with an area of 140 km2, located at the north margin of the Bashikaogong Basin in the north Altun terrain. It intruded into schist, metapelite and metatuff of Precambrian ages. This granitoid complex consists of darkish quartz diorite, grey granite, pink granite and pegmatite. Geochemically, the quartz diorite has I-type granite affinity and belongs to Calc-alkaline sereies, and the other gran- ites have S-type affinity and to high-K calc-alkaline series. Zircon SHRIMP U-Pb dating shows that the quartz diorite has a bigger age than those of other granites, which is 481.6±5.6 Ma for quartz diorite, 437.0±3.0 Ma―433.1±3.4 Ma for grey granite and 443±11 Ma―434.6±1.6 Ma for pink granite, re- spectively. Combined with regional geology, we think that the quartz diorite formed in tectonic envi- ronment related to oceanic crust subduction and the granites in post-collision.     

Radiocesium reaction with illite and organic matter in marine sediment

The mineralogical effect on the (137)Cs reaction with marine sediment has not been systematically studied yet, even though illite has been known to adsorb Cs preferentially on its frayed edge sites in a low Cs concentration. Ninety-three marine sediment samples were collected near Yangnam, Korea for quantitative X-ray-diffraction (XRD), gamma-ray, and total organic carbon (TOC) analysis. Illite content was in the range of 0-23 wt.% and those of (137)Cs and TOC were minimum detectable activity (MDA) approximately 7.19 Bq/kg-dry and approximately 3.32%, respectively. The illite content in the marine sediment showed a good relationship with the (137)Cs content (R(2)=0.69), but with an increase in the illite content, the relationship became less linear. This trend can be clearly shown in two groups of samples with different size fractions (< and >5Mdvarphi). For the samples of larger particle sizes (low contents of illite), the relationship is linear, but for the samples of the smaller particle sizes (high illite content) it is less linear with a decreased slope, indicating that increase in illite content does not significantly contribute to the fixation of (137)Cs in marine sediment. Rather, the TOC has a more linear relationship with (137)Cs content with no slope change in all particle size ranges. This may indicate that humic materials in marine sediment block the access of (137)Cs to the frayed edge site and reduces the adsorption of (137)Cs on illite and that the organic materials in marine sediment play more important roles in adsorbing Cs than illite.     

A visual basic spreadsheet macro for recession curve analysis

A Visual Basic program for an Excel spreadsheet was written to construct a master recession curve (MRC), using the adapted matching strip method, for recession analysis of ground water level time series. The program uses five different linear/nonlinear regression models to adjust individual recession segments to their proper positions in the MRC. The program can also be used to analyze the recession segments of other time series, such as daily stream discharge or stage. Some examples of field data from Croatia are used to illustrate the usefulness of its application.     

Reducing long-term remedial costs by transport modeling optimization

The Department of Defense (DoD) Environmental Security Technology Certification Program and the Environmental Protection Agency sponsored a project to evaluate the benefits and utility of contaminant transport simulation-optimization algorithms against traditional (trial and error) modeling approaches. Three pump-and-treat facilities operated by the DoD were selected for inclusion in the project. Three optimization formulations were developed for each facility and solved independently by three modeling teams (two using simulation-optimization algorithms and one applying trial-and-error methods). The results clearly indicate that simulation-optimization methods are able to search a wider range of well locations and flow rates and identify better solutions than current trial-and-error approaches. The solutions found were 5% to 50% better than those obtained using trial-and-error (measured using optimal objective function values), with an average improvement of approximately 20%. This translated into potential savings ranging from 600,000 dollars to 10,000,000 dollars for the three sites. In nearly all cases, the cost savings easily outweighed the costs of the optimization. To reduce computational requirements, in some cases the simulation-optimization groups applied multiple mathematical algorithms, solved a series of modified subproblems, and/or fit "meta-models" such as neural networks or regression models to replace time-consuming simulation models in the optimization algorithm. The optimal solutions did not account for the uncertainties inherent in the modeling process. This project illustrates that transport simulation-optimization techniques are practical for real problems. However, applying the techniques in an efficient manner requires expertise and should involve iterative modification to the formulations based on interim results.