Removal of dyes by adsorption on magnetically modified activated sludge

The ability of magnetically modified activated sludge affected by thermal treatment to remove water-soluble organic dyes was examined. Twelve different dyes were tested. Based on the results of the initial sorption study, four dyes (namely aniline blue, Nile blue, Bismarck brown Y and safranin O) were chosen for further experiments due to their promising binding onto magnetic activated sludge. Significant factors influencing adsorption efficiency such as dependence of contact time, initial pH or temperature were studied in detail. The adsorption process was very fast; more than 88 % of dye content (55 mg/L) was adsorbed within 15 min under experimental conditions used. The equilibrium adsorption data were analyzed by Freundlich, Langmuir and Sips adsorption isotherm models, and the fitting of each isotherm model to experimental data was assessed on the basis of error functions. The maximum adsorption capacities of magnetic activated sludge were 768.2, 246.9, 515.1 and 326.8 mg/g for aniline blue, Bismarck brown Y, Nile blue and safranin O, respectively. The kinetic studies indicated that adsorption of all selected dyes could be well described by the pseudo-second-order kinetic model, and the thermodynamic data suggested the spontaneous and endothermic process.     

Lateritization cycles and their relation to the formation and quality of kaolin deposits in south Kerala, India

Laterite occurs extensively over the crystalline and sedimentary rocks in the midland and lowland areas of south Kerala, India. Two lateritization cycles are identified in this area. Large, good-quality kaolin deposits, composed mostly of kaolinite, are characteristic of the sedimentary sequence in south Kerala. These deposits were formed on deposition of the weathering materials of the khondalites towards the first cycle of lateritization. After deposition and uplift of the sedimentary rocks, another lateritization cycle affected these, as well as the khondalites during pre-Quaternary times with the formation of a planation surface at 25–125 m above sea level having thick laterite profiles. The laterite profiles over the kaolin deposits show higher concentration of Fe-oxides (mostly in the form of hematite) and titania, compared to their concentration in the kaolins. Higher contents of Cr and Ni are also characteristic of the laterite over kaolin deposits. Recrystallization of the kaolinite, appearance of Al, Fe and Si amorphous phases in the kaolin clays and partial removal of Fe and Ti from them are attributed to the second lateritization cycle.     

Magnitudes, spatial scales and processes of environmental antimony mobility from orogenic gold–antimony mineral deposits, Australasia

Antimony (Sb) is strongly concentrated into hydrothermal mineral deposits, commonly with gold, in metasedimentary sequences around the Pacific Rim. These deposits represent potential point sources for Sb in the downstream environment, particularly when mines are developed. This study documents the magnitude and scale of Sb mobility near some mineral deposits in Australia and New Zealand. Two examples of New Zealand historic mining areas demonstrate that natural groundwater dissolution of Sb from mineral deposits dominates the Sb load in drainage waters, with Sb concentrations between 3 and 24 μg/L in major streams. Mine-related discharges can exceed 200 μg/L Sb, but volumes are small. Sb flux in principal stream waters is ca 1–14 mg/s, compared to mine tunnel fluxes of ca 0.001 mg/s. Dissolved Sb is strongly attenuated near some mine tunnels by adsorption on to iron oxyhydroxide precipitates. Similar Sb mobilisation and attenuation processes are occurring downstream of the historic/active Hillgrove antimony–gold mine of New South Wales, Australia, but historic discharges of Sb-bearing debris has resulted in elevated Sb levels in stream sediments (ca 10–100⁺ mg/kg) and riparian plants (up to 100 mg/kg) for ca 300 km downstream. Dissolution of Sb from these sediments ensures that river waters have elevated Sb (ca 10–1,000 μg/L) over that distance. Total Sb flux reaching the Pacific Ocean from the Hillgrove area is ca 8 tonnes/year, of which 7 tonnes/year is particulate and 1 tonne/year is dissolved.     

P–T–fluid evolution in the Mahalapye Complex, Limpopo high-grade terrane, eastern Botswana

Metapelites, migmatites and granites from the c. 2 Ga Mahalapye Complex have been studied for determining the P–T–fluid influence on mineral assemblages and local equilibrium compositions in the rocks from the extreme southwestern part of the Central Zone of the Limpopo high‐grade terrane in Botswana. It was found that fluid infiltration played a leading role in the formation of the rocks. This conclusion is based on both well‐developed textures inferred to record metasomatic reactions, such as Bt ? And + Qtz + (K₂O) and Bt ± Qtz ? Sil + Kfs + Ms ± Pl, and zonation of Ms | Bt + Qtz | And + Qtz and Grt | Crd | Pl | Kfs + Qtz reflecting a perfect mobility (Korzhinskii terminology) of some chemical components. The conclusion is also supported by the results of a fluid inclusion study. CO₂ and H₂O ( = 0.6) are the major components of the fluid. The fluid has been trapped synchronously along the retrograde P–T path. The P–T path was derived using mineral thermobarometry and a combination of mineral thermometry and fluid inclusion density data. The Mahalapye Complex experienced low‐pressure granulite facies metamorphism with a retrograde evolution from 770 °C and 5.5 kbar to 560 °C and 2 kbar, presumably at c. 2 Ga.     

Submarine hydrothermal mineralization in the Okinawa Trough, SW of Japan: an overview

The Okinawa Trough is a heavily sedimented, rifted back-arc basin formed in an intracontinental rift zone. Submarine hydrothermal activity is located within the six back-arc rifts located in the middle and southern Okinawa Trough and its distribution is controlled principally by tectonic factors. Subduction of the Daito and Gagua Ridges beneath the Ryukyu Arc has resulted in fracturing of the brittle lithosphere beneath the Okinawa Trough. Hydrothermal activity is strongest in the volcanic arc-rift migration phenomenon (VAMP) area plus the JADE site and Southernmost Part of the Okinawa Trough (SPOT) area which form the prolongation of these two ridges. These areas are characterized by extremely high heat flow locally. Submarine hydrothermal fluids from the Okinawa Trough tend to be strongly influenced by interaction of the hydrothermal fluids with organic matter in the sediment resulting in high alkalinity and NH₄⁺ concentrations of the fluids. The fluids also contain high concentrations of CO₂ of magmatic origin. Submarine hydrothermal mineralization in the trough is diverse. The CLAM site consists principally of carbonate chimneys. Interaction of the hydrothermal fluid with organic matter in the sediment is particularly strong at this site. This is most probably a sediment-hosted deposit in which sulphide minerals have deposited within the sediment column leaving ‘spent ore-fluids’ to emerge at the seafloor. The JADE site consists of active and inactive sulphide–sulphate chimneys and mounds. The Zn–Pb-rich sulphides at this site contain the highest concentrations of Pb, Ag and Au so far recorded in submarine hydrothermal sulphide deposits. At Minami-Ensei Knoll and Hatoma Knoll, active and inactive chimneys consist principally of anhydrite and barite as a result of phase separation of the hydrothermal fluids beneath the seafloor. An intense black smoker has recently been discovered at Yonaguni Knoll in the SPOT area. If it is confirmed that sulphide mineralization is dominant at this site, this could be a highly prospective area. The most prospective areas for economic-grade minerals in the Okinawa Trough appear to be the JADE site and the SPOT area.     

Occurrence of wagnerite in Mg–Al granulites of Sonapahar,Meghalaya

We report for the first time the occurrence of rare phosphate wagnerite as a stable phase from the Mg–Al granulites of Sonapahar. The wagnerite bearing assemblages consist of the spinel, phlogopite, brucite and corundum. The wagnerite appears in the Mg–Al granulites due to the break-down of spinel and fluorapatite. The mineral chemistry of the phases has been discussed from the EPMA data, which reveals that the fluorine content of the wagnerite is relatively low due to the exchange of F to coexisting phases. The major oxide analysis of the rocks show the low content of Ca, which is the requisite for the occurrences of wagnerite.     

Largest Toothed Pterosaur Skull from the Early Cretaceous Yixian Formation of Western Liaoning,China, with Comments on the Family Boreopteridae

A new pterosaur Moganopterus zhuiana gen. et sp. nov. is erected based on a complete skull with lower jaws and anterior cervical vertebrae. It is characterized by much elongated upper and lower jaws with at least 62 total, long, curved teeth with sharp tips, a well developed parietal crest extending posterodorsally, forming an angle of 15 degrees with the ventral margin of the skull, the ratio of length to width of cervical vertebrae greater than 5:1. The skull length is 750 mm, and it is the largest toothed pterosaur found so far in the world. Based on this new pterosaur, the Boreopteridae can be divided into two subgroups: Boreopterinae sub-fam. nov. and Moganopterinae sub-fam. nov., which is also confirmed by the phylogenetic analysis.     

Considerations on the European Standard EN 14157 Test Methods: Abrasion Resistance of Natural Stones Used for Flooring in Buildings

In Europe, the Wide Wheel abrasion (WWA) test and the B?hme abrasion (BA) test are among the most widely used standard test methods for determining abrasion resistance of natural stones, the former being the reference test method in EN 14157 Standard. However, it is stated in the Annex-A (Informative) of EN 14157 Standard that very limited data are available to provide correlations between these two test methods. To be able to fill this gap, in this study, 25 different natural stones belonging to sedimentary, metamorphic and igneous groups were tested for their abrasion resistance as well as physico-mechanical properties. Also, for a better interpretation of abrasion resistance characteristics of the tested stone materials, relationships between abrasion resistance and physico-mechanical properties were statistically examined. A statistically significant linear correlation (R ² = 0.85; P value = 0.000) was established between the WWA test and the BA test, which could be used in practice for converting the measured abrasion resistance values from one testing method to another. It was also found that the correlation between these two test methods improved significantly (R ² = 0.93; P value = 0.001) when relatively high-porosity stone materials (porosity ≥1%) were separately evaluated. Both methods of abrasion resistance employed in the present study showed statistically significant linear correlations with uniaxial compressive strength and Brazilian tensile strength, the former proving to be a more influencing parameter on resistance to abrasion. Also, from the point view of representing actual abrasion mechanism of stone materials in practice, the necessity of simulating multi-directional foot traffic in abrasion testing methods was discussed. In this respect, the reference test method in the EN 14157 Standard was criticized for not fully meeting this requirement. It was also pointed out that the reference method could have some drawbacks when applied to coarse-grained granitic rocks having cleavable minerals such as plagioclase and orthoclase feldspars.     

Formation of arcs and backarc basins inferred from the tectonic evolution of Southeast Asia since the Late Cretaceous

Results of the geological and geophysical surveys in the Daito ridges and basin in the northern West Philippine Basin suggest that the Daito Ridge was an arc facing toward the south from the Late Cretaceous to the Early Tertiary. The Late Cretaceous and Tertiary history of Southeast Asia is evaluated based on these data in the Daito ridges and basins and reconstructed based on overall plate kinematics that have operated in this area. During the Late Cretaceous, the Daito Ridge and the East Philippine Islands were positioned along the boundary between the Indian and Pacific Plates. The western half of the Philippines setting on the Indian Plate approached from the south and collided with the East Philippine–Daito Arc either during the latest Paleocene or the earliest Eocene. It is inferred that the bulk of the Philippine archipelago rotated clockwise and Borneo spun counterclockwise during the Tertiary.From the reconstruction, the formation of backarc basins and their spreading direction are assessed. As a result, some primary causes and significant characteristics are suggested for the opening of backarc basins in Southeast Asia. First, opening of some backarc basins commenced with or was triggered by collisions. Second, backarc basins opened approximately parallel to oceanic plate motion. Third, the formation of some backarc basins was triggered by the approach of a hot spreading center. Fourth, the spreading mode or direction of backarc basins was greatly affected by the configuration of the surrounding continent and was also rearranged to spread approximately parallel to oceanic plate motion.The formation of backarc basins and their spreading direction can be reasonably explained by plate kinematics. However, the generative force responsible for their formation is possibly within the subduction system, particularly to form horizontal tensional force in backarc side.