GEBCO Centennial Special Issue – Charting the Secret World of the Ocean Floor: The GEBCO Project 1903–2003

This special issue of Marine Geophysical Researches presents five papers dealing with GEBCO, the General Bathymetric Chart of the Oceans, which celebrated its Centennial in April 2003, hosted by the International Hydrographic Bureau and the Principality of Monaco. Over the past 103 years GEBCO has been the sole body dedicated to compiling all available data to produce standardized maps of the oceans and seas covering 71% of planet Earth. Over time GEBCO has undergone a complete transformation as sparse 500 m contours on paper charts were replaced by digital grids with ever-increasing resolution. The 2003 Centennial saw the release on two CDROMS with the first global 1′ grid, produced by methods unheard of in 1984, when GEBCO’s last 6th Edition paper chart set was published. In GEBCO’s second century, the thrust is towards global grids that will capture the resolutions available with evolving deep-water swath mapping technologies, as well as vast improvement in the details of the shallow continental shelves that have traditionally been the preserve of the hydrographic community. As little more than 10% of the oceans have been mapped to the desired level of detail, there is much to be done. However refinements in satellite altimetry appear to offer an interim stop-gap as more multi-beam sonars ply the oceans and as the littoral countries of the world map their adjacent marine areas for submission under Article 76 of UNCLOS (United Nations, 1983, 1999). In addition GEBCO is becoming increasingly proactive, with outreach to the public via the internet and a new GEBCO Map of the World, active data-scrounging, and encouraging development of the first drifting buoys for acquiring data in the inaccessible areas of the Antarctic, SW Pacific, and Arctic Oceans.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Shoreline variability via empirical orthogonal function analysis: Part I temporal and spatial characteristics

Empirical orthogonal functions (EOFs) or principal components were used to extract the significant modes of shoreline variability from several data sets collected at three very different locations. Although EOFs have proven to be a valuable tool in the analysis of nearshore data, most applications have focused on the ability of the technique to describe cross-shore or profile variability. Here however, EOFs were used to help identify the dominant modes of longshore shoreline variability at Duck, North Carolina, the Gold Coast, Australia, and at several locations within the Columbia River Littoral Cell in the U.S. Pacific Northwest. In part one of this analysis, characteristic patterns of shoreline variability identified by the EOF analysis are described in detail. At each site, the dominant modes consisting of the first four eigenfunctions were found to describe nearly 95% of the total shoreline variability. At both Duck and the Gold Coast, several interesting longshore periodic features suggestive of sand waves were identified, while boundary effects related to natural headlands and navigational structures/entrances dominated the Pacific Northwest data sets.     

中国马尾藻属的研究Ⅲ.丛伞托序族

对中国马尾藻属，真马尾藻亚属，滑托组，丛伞托序族的种类进行系统研究。此族种类的主要特征是生殖托光滑，聚伞状排列在小校上，生殖托柄状部位都有生殖窝。多孢马尾藻是该族的非常特殊种类，它的分校和小分枝上密生刺和羽状分裂的藻叶。文中还报道了一个新种一长干马尾藻。模式标本产自广东省徐闻，还见于海丰。至今为止，丛伞托序族在中国共有两种。     

Lagrangian measurements in the Kamchatka Current and Oyashio

From 1988 to 1993, 23 satellite-tracked drifting buoys entered the Kamchatka Current. The buoy trajectories showed a well-formed, high-speed current that originated near Shirshov Ridge, and flowed southward through Kamchatka Strait. During some years, the buoys turned eastward at 50°N, while in other years they were transported as far south as Japan (40°N). Only one buoy entered the Sea of Okhotsk. Eddies were evident in many of the buoy trajectories. Greatest maximum daily velocities (>100 cm s^–1) were observed south of Kamchatka Strait, with 50–60 cm s^–1 being more common.     

Tank wall effects on broadside current forces on barge models

Three different barge sizes were tested in uniform current in a tank of limited width. One of the barges was tested with and without bilge keels. Tests were conducted in both deep and shallow water. The barges were placed broadside to the current flow and the lateral forces on the barges were measured. The effect of the tank walls on these forces is clearly shown.     

Caught in the act: the 20 December 2001 gravity flow event in Monterey Canyon

A sediment gravity flow descended through the axis of Monterey Canyon on 20 December 2001 at 13:35 Pacific standard time. The timing of this event is documented by a current-meter package which recorded an 11.9-dbar pressure increase in less than 10 min and was found 550 m down-canyon from its deployment site, buried completely within a >70-cm-thick gravity flow deposit. This event is believed to have started in less than 290 m of water because an instrument at this location was also lost at the same time. A 178-cm core collected after the event from the axis of the canyon at 1,297-m water depth contained fresh, greenish, chlorophyll-rich organic material at 32-cm sub-bottom depth, suggesting the event extended to this water depth. The only trigger identified for this mass movement event appears to be moderate sea and surf conditions. Thus, gravity flow events of this magnitude do not require an exceptional triggering event.