Evaluation of Composts from Agricultural Wastes with Fish Pond Sediment as Bulking Agent to Improve Compost Quality

Composts with five different ratios of agricultural wastes, viz. rice straw (RS), wheat straw (WS), potato plant (PP), and mustard stover (MS) were prepared with or without fish pond bottom sediment to investigate the compost maturity and their suitability for field application. The composting process was monitored through the changes in physico‐chemical parameters and germination index (GI) at every 7 days interval of the composting process. All the composts were dark brown and smelled like forest soil within 56 days of composting, which reflected its matured status. On the basis of the physico‐chemical parameters (bulk density: 0.84 g/cm³; pH 7.05; electrical conductivity: 3.52 mS/cm; cation exchange capacity:82.4 cmol/kg; total carbon:321.4 g/kg; total nitrogen: 16.9 g/kg; As: 6.8 mg/kg; Cd: 2.96 mg/kg; Cr: 29.6 mg/kg, Cu: 243.6 mg/kg; Hg: 0.019 mg/kg; Ni: 24.3 mg/kg; Pb: 62.1 mg/kg and Zn: 812 mg/kg) and GI (89–96%), it could be concluded that RS/WS/PP/MS, 1:1:2:1 v/v/v/v with fish pond sediment produced better compost in accordance with the Indian compost standard. Application of a combined randomized block design analysis revealed that there is a significant difference in the responses of the five composts, in relation to the time of composting. Hierarchical clustering algorithm was applied with a view to form homogeneous groups of five different composts on the basis of different physico‐chemical parameters. Therefore, the ratio of waste incorporation is an important decision for composting and addition of pond sediment can improve the quality of compost.     

Variation of δ18O, δD and 3H in karst springs of south Kashmir,western Himalayas (India)

Water samples were collected from cold and warm karst springs for stable isotopes (δ¹⁸O and δD) and ³H from SE of Kashmir valley (western Himalayas) to distinguish the sources of recharge and infer their recharge areas. The spring water samples were most depleted in heavier isotopes in May (average δ¹⁸O: ?8.87‰ and δD: ?50.3‰) and enriched in September (average δ¹⁸O: ?7.58‰ and δD: ?48.1‰). The depleted ¹⁸O and ²H of spring waters bear the signatures of winter precipitation while as the enriched ¹⁸O and ²H of spring waters bear the signature of summer rainfall. D‐excess and ³H corroborate with the stable isotope results that the spring flow in spring season (May) and autumn (September) is dominantly controlled by the melting of winter snowmelt and summer rainfall, respectively. The results showed that unlike δD, the δ¹⁸O value in the karst spring waters decreases in January suggesting δ¹⁸O shift. The spring water samples also fall above the Local Meteoric Water Line and Global Meteoric Water Line indicating the δ¹⁸O shift due to interaction of groundwater with the host carbonate rocks during its traverse. The mean elevation of the recharge areas of the springs using δ¹⁸O and δD tracers was also estimated. Copyright © 2014 John Wiley & Sons, Ltd.     

Age and geochemistry of the Newania dolomite carbonatites, India: implications for the source of primary carbonatite magma

The Newania carbonatite complex of India is one of the few dolomite-dominated carbonatites of the world. Intruding into Archean basement gneisses, the rocks of the complex have undergone limited diversification and are not associated with any alkaline silicate rock. Although the magmatic nature of the complex was generally accepted, its age of emplacement had remained equivocal because of the disturbed nature of radioisotope systems. Many questions about the nature of its mantle source and mode of origin had remained unanswered because of lack of geochemical and isotopic data. Here, we present results of our effort to date the complex using ¹⁴⁷Sm–¹⁴³Nd, ²⁰⁷Pb–²⁰⁶Pb and ⁴⁰Ar–³⁹Ar dating techniques. We also present mineral chemistry, major and trace element geochemistry and Sr–Nd isotopic ratio data for these carbonatites. Our age data reveal that the complex was emplaced at ~1,473 Ma and parts of it were affected by a thermal event at ~904 Ma. The older ²⁰⁷Pb–²⁰⁶Pb ages reported here (~2.4 Ga) and by one earlier study (~2.3 Ga; Schleicher et al. Chem Geol 140:261–273, 1997) are deemed to be a result of heterogeneous incorporation of crustal Pb during the post-emplacement thermal event. The thermal event had little effect on many magmatic signatures of these rocks, such as its dolomite–magnesite–ankerite–Cr-rich magnetite–magnesio-arfvedsonite–pyrochlore assemblage, mantle like δ¹³C and δ¹⁸O and typical carbonatitic trace element patterns. Newania carbonatites show fractional crystallization trend from high-Mg to high-Fe through high-Ca compositions. The least fractionated dolomite carbonatites of the complex possess very high Mg# (≥80) and have similar major element oxide contents as that of primary carbonatite melts experimentally produced from peridotitic sources. In addition, lower rare earth element (and higher Sr) contents than a typical calcio-carbonatite and mantle like Nb/Ta ratios indicate that the primary magma for the complex was a magnesio-carbonatite melt and that it was derived from a carbonate bearing mantle. The Sr–Nd isotopic data suggest that the primary magma originated from a metasomatized lithospheric mantle. Trace element modelling confirms such an inference and suggests that the source was a phlogopite bearing mantle, located within the garnet stability zone.     

Geothermal energy potential of Tulsishyam thermal springs of Gujarat,India

Tulsishyam thermal springs are located in the Saurashtra region of Gujarat, India with discharge temperatures varying from 39 to 42 °C. The pH of these thermal springs varies from 7.1 to 7.4, indicating neutral character. Though these thermal springs propagate through the near surface layer of Deccan basalt, detailed geochemical analysis of the thermal waters using Piper diagram suggests that the water is interacting with the granitic basement rock. Silica and cation geothermometry estimates have reservoir temperature in the range of 138 to 207 °C categorizing it into a low to moderate enthalpy geothermal system. Furthermore, the area has high heat flow values of 53–90 mW/m² because of shallow Moho depth. The prevailing conditions suggest that the geothermal energy can potentially be exploited through an enhanced geothermal system (EGS). The study also indicates different mineral phases that may precipitate out of water during exploitation of geothermal energy and it should be taken into account while designing an EGS for the area.     

Static deformation of two welded half-spaces due to very long strike-slip dislocations

Closed form analytic expressions for displacement and stresses at any point of either of the two homogeneous, isotropic, perfectly elastic half-spaces in welded contact due to very long strike-slip dislocations are obtained. Both cases of vertical and horizontal strike-slip dislocations are discussed in detail. Variation of the displacement with horizontal distance from the fault and with vertical distance from the interface for a vertical strike-slip fault is studied numerically.     

Measurement of radon exhalation rate in various building materials and soil samples

Indoor radon is considered as one of the potential dangerous radioactive elements. Common building materials and soil are the major source of this radon gas in the indoor environment. In the present study, the measurement of radon exhalation rate in the soil and building material samples of Una and Hamirpur districts of Himachal Pradesh has been done with solid state alpha track detectors, LR-115 type-II plastic track detectors. The radon exhalation rate for the soil samples varies from 39.1 to 91.2 mBq kg^?1 h^?1 with a mean value 59.7 mBq kg^?1 h^?1. Also the radium concentration of the studied area is found and it varies from 30.6 to 51.9 Bq kg^?1 with a mean value 41.6 Bq kg^?1. The exhalation rate for the building material samples varies from 40.72 (sandstone) to 81.40 mBq kg^?1 h^?1 (granite) with a mean value of 59.94 mBq kg^?1 h^?1.     

Diagnostics of subseasonal prediction biases of the Asian summer monsoon by the NCEP climate forecast system

Biases of subseasonal prediction of the Asian summer monsoon are diagnosed using daily data from the hindcasts of 45-day integrations by the National Centers for Environmental Prediction Climate Forecast System version 2. The retrospective forecasts often show apparent systematic biases, which are mostly represented by the underestimation of the whole Asian monsoon. Biases depend not only on lead time, but also on the stage of monsoon evolution. An abrupt turning point of bias development appears around late June and early July, when ensemble spread and bias growth of winds and precipitation show a significant change over the northwestern Pacific (NWP) and the South Asian summer monsoon (SASM) region. The abrupt turning of bias development of winds, precipitation, and surface temperature is also captured by the first two modes of multivariate empirical orthogonal function analysis. Several features appear associated with the abrupt change in bias development: the western Pacific subtropical high (WPSH) begins its first northward jump and the surface temperature over the Tibetan Plateau commences a transition from warm bias to cold bias, and a reversal of surface temperature biases occurs in the eastern tropical Indian Ocean and the SASM region. The shift of WPSH position and the transition of surface thermal bias show close relationships with the formation of bias centers in winds and precipitation. The rapid growth in bias due to the strong internal atmospheric variability during short leads seems to mainly account for the weak WPSH and SASM in the model. However, at certain stages, particularly for longer-lead predictions, the biases of slowly varying components may also play an important role in bias development of winds and precipitation.