Time–Frequency–Wavenumber Analysis of Surface Waves Using the Continuous Wavelet Transform

A modified approach to surface wave dispersion analysis using active sources is proposed. The method is based on continuous recordings, and uses the continuous wavelet transform to analyze the phase velocity dispersion of surface waves. This gives the possibility to accurately localize the phase information in time, and to isolate the most significant contribution of the surface waves. To extract the dispersion information, then, a hybrid technique is applied to the narrowband filtered seismic recordings. The technique combines the flexibility of the slant stack method in identifying waves that propagate in space and time, with the resolution of f–k approaches. This is particularly beneficial for higher mode identification in cases of high noise levels. To process the continuous wavelet transform, a new mother wavelet is presented and compared to the classical and widely used Morlet type. The proposed wavelet is obtained from a raised-cosine envelope function (Hanning type). The proposed approach is particularly suitable when using continuous recordings (e.g., from seismological-like equipment) since it does not require any hardware-based source triggering. This can be subsequently done with the proposed method. Estimation of the surface wave phase delay is performed in the frequency domain by means of a covariance matrix averaging procedure over successive wave field excitations. Thus, no record stacking is necessary in the time domain and a large number of consecutive shots can be used. This leads to a certain simplification of the field procedures. To demonstrate the effectiveness of the method, we tested it on synthetics as well on real field data. For the real case we also combine dispersion curves from ambient vibrations and active measurements.     

Land acquisition: a means to mitigate water scarcity and reduce conflict?

ABSTRACT

In recent years there has been a surge in land investments, primarily in the African continent, but also in Asia and Latin America. This increase in land investment was driven by the food pricing crisis of 2007–2008. Land investors can be identified from a variety of sectors, with actors ranging from hedge funds to national companies. Many water-scarce countries in the Middle East and North Africa (MENA) are among these financiers, and primarily invest in Africa. Recognizing the potential for “outsourcing” their food security (and thereby also partly their water security), Middle Eastern countries such as Jordan, Qatar and the United Arab Emirates have invested in land for food production in Africa. The extent to which this is happening is still unclear, as many contracts are not yet official and the extent of the leases is vague. This paper investigates the land investments and acquisitions by Middle Eastern countries. It also seeks to analyse what effect, if any, these investments can have on the potential for conflict reduction and subsequent peacebuilding in the Middle East region as the activity removes pressure from transboundary water resources.

EDITOR D. Koutsoyiannis ASSOCIATE EDITOR K. Aggestam     

Subharmonic Dynamo Action in the Roberts Flow

The paper deals with the dynamo action of the Roberts flow, that is, a flow depending periodically on two cartesian coordinates, X and Y , but being independent of the third one, Z . In particular the case is considered in which the magnetic fields, which are periodic in X, Y and Z , have period lengths in the XY -plane being integer multiples of that of the flow. Two approaches are used. Firstly, the equations governing the magnetic field are reduced to a matrix eigenvalue problem, which is solved numerically. Secondly, a mean magnetic field is defined by averaging over proper areas in the XY -plane, corresponding equations are derived, in which the induction effect of the flow occurs as an anisotropic f -effect, and analytic solutions are given. The results are of particular interest for the Karlsruhe dynamo experiment, which works with a Roberts type flow consisting of 52 cells inside a cylindrical volume. In order to check the reliability of predictions concerning self-excitation based on the mean-field approach, analogous predictions are derived for a rectangular box containing 50 cells, and are compared with results obtained with the help of direct solutions of the eigenvalue problem mentioned. It turns out that the simple mean-field approach in general underestimates the requirements for self-excitation. The corresponding results agree with those obtained in the subharmonic approach only if the side length L of the box, its height H and the edge length l of a spin generator satisfy $ L \gg H \gg l $ . In Appendix B, some comments on previous results concerning $\cal {ABC}$ dynamos are made in the light of the subharmonic formalism used in the paper.     

Comparison of an Electrochemical and Luminescence‐Based Oxygen Measuring System for Use in the Biodegradability Testing According to Closed Bottle Test (OECD 301D)

The effects of persistent organic pollutants on the aquatic environment still can hardly be assessed. Therefore, ready biodegradability is a desired key characteristic of chemicals. Accordingly, biodegradation testing is of utmost importance and is a vital part within the risk assessment for organic chemicals. In the closed bottle test (CBT; OECD 301D) the degree of biological degradation of a chemical is assessed by monitoring the oxygen consumption so far with a Clark electrode as standard method. However, this method is time‐consuming, laborious and led to frequent fluctuations of the test results, which limited their validity. Due to these shortcomings, an optical system that enables contact‐free measuring of the oxygen concentration in a closed bottle, based on dynamic luminescence quenching, was examined. The test results were compared to those obtained with the “classical” electrochemical technique (Clark electrode). At first, a basic standard for the handling of the new instrument in the laboratory was developed. Then possible influencing factors, reliability, comparability, and reproducibility of the test results were investigated by running the CBTs in parallel with the electrode and optode method. The findings proved the new optode method to be unambiguously superior to the electrode technique. The frequency of fluctuations of the test results and time and effort necessary for the test run could considerably be reduced. The degradation kinetics of the test substances could be followed easily in the CBT by increasing the measuring points without much additional effort.     

Impact of loading displacements on SLR-derived parameters and on the consistency between GNSS and SLR results

Displacements of the Earth’s surface caused by tidal and non-tidal loading forces are relevant in high-precision space geodesy. Some of the corrections are recommended by the international scientific community to be applied at the observation level, e.g., ocean tidal loading (OTL) and atmospheric tidal loading (ATL). Non-tidal displacement corrections are in general recommended not to be applied in the products of the International Earth Rotation and Reference Systems Service, in particular atmospheric non-tidal loading (ANTL), oceanic and hydrological non-tidal corrections. We assess and compare the impact of OTL, ATL and ANTL on SLR-derived parameters by reprocessing 12 years of SLR data considering and ignoring individual corrections. We show that loading displacements have an influence not only on station long-term stability, but also on geocenter coordinates, Earth Rotation Parameters, and satellite orbits. Applying the loading corrections reduces the amplitudes of annual signals in the time series of geocenter and station coordinates. The general improvement of the SLR station 3D coordinate repeatability when applying OTL, ATL and ANTL corrections are 19.5 %, 0.2 % and 3.3 % respectively, w.r.t. the solutions without loading corrections. ANTL corrections play a crucial role in the combination of optical (SLR) and microwave (GNSS, VLBI, DORIS) space geodetic observation techniques, because of the so-called Blue-Sky effect: SLR measurements can be carried out only under cloudless sky conditions—typically during high air pressure conditions, when the Earth’s crust is deformed, whereas microwave observations are weather-independent. Thus, applying the loading corrections at the observation level improves SLR-derived products as well as the consistency with microwave-based results. We assess the Blue-Sky effect on SLR stations and the consistency improvement between GNSS and SLR solutions when ANTL corrections are included. The omission of ANTL corrections may lead to inconsistencies between SLR and GNSS solutions of up to 2.5 mm for inland stations. As a result, the estimated GNSS–SLR coordinate differences correspond better to the local ties at the co-located stations when applying ANTL corrections.     

Early Triassic potassic volcanism in the Afyon Zone of the Anatolides/Turkey: implications for the rifting of the Neo-Tethys

Afyon Zone, which was derived from the Anatolide–Tauride platform during closure of the Neo-Tethys, is made up of pre-Mesozoic basement and unconformably overlying Triassic–Early Tertiary cover series. The Afyon Zone contains widespread metavolcanic rocks, which are dominated by rhyolite, dacite, and trachyandesite. They form a distinct volcanic succession, which is separated from the underlying Silurian–Lower Carboniferous metacarbonates and meta-siliciclastics by a regional unconformity. Trachyandesitic metavolcanics are made up of massive lava flows, pyroclastics and epiclastics, less frequently, domes and dikes, which were developed on a deeply eroded subaerial landmass. U/Pb and Pb/Pb zircon geochronology yielded Lower Triassic (~250 Ma) ages, which are interpreted as extrusion age of trachyandesitic volcanics. Based on the stratigraphic, geochronological, and geochemical data, we suggest that these Lower Triassic magmatic rocks represent an extensional tectonic setting on the northern active margin of the Gondwana, which led to the development of the northern branch of the Neo-Tethys.     

Simulation of DNAPL infiltration and spreading behaviour in the saturated zone at varying flow velocities and alternating subsurface geometries

The influence of varying groundwater flow velocities on DNAPL infiltration and spreading behaviour was investigated by multiphase modelling using TMVOC and PetraSim. The multiphase models were calibrated by results of previously conducted laboratory experiments for the complete spatio-temporal range of the experiments. The small scale 2D scenario modelling was applied to qualify and quantify changes in position, architecture, geometry and dissolution of a TCE body in a fully saturated homogeneous sandy medium. The applied flow velocities ranging from 0.05 up to 40.00 m/day exhibited that the DNAPL TCE is affected even at the lowest flow velocity in its position, its size and its architecture. Additionally, several impermeable lenses with simple geometry were assumed in the model, to investigate the influence of stratified subsoil. In the experimental set-ups, the DNAPL body reacts more sensitive to the applied groundwater flow velocities than to the geometrical set-up of the scenarios. A possible consequence can be the transportation and displacement of a DNAPL pool due to natural or anthropogenic induced high groundwater flow velocities, as by Pump and Treat facilities, complicating site investigation process and planning of remediation activities.     

Sorption-desorption kinetics and toxic cell concentration in marine phytoplankton microalgae exposed to Linear Alkylbenzene Sulfonate

Linear Alkylbenzene Sulfonates (LAS) are ubiquitous surfactants. Traces can be found in coastal environments. Sorption and toxicity of C₁₂-LAS congeners were studied in controlled conditions (2-3500 μg C₁₂LAS/L) in five marine phytoplanktonic species, using standardized methods. IC₅₀ values ranged from 0.5 to 2 mg LAS/L. Sorption of ¹⁴C₁₂-6 LAS isomer was measured at environmentally relevant trace levels (4 μg/L) using liquid scintillation counting. Steady-state sorption on algae was reached within 5 h in the order dinoflagellate > diatoms > green algae. The sorption data, fitted a L-type Freundlich isotherm, indicating saturation. Desorption was rapid but a low LAS fraction was still sorbed after 24 h. Toxic cell concentration was 0.38 ± 0.09 mg/g for the studied species. LAS toxicity results from sorption on biological membranes leading to non-specific disturbance of algal growth. Results indicate that LAS concentrations in coastal environments do not represent a risk for these organisms.