A search for microwave emission from CH in Comet Kohoutek (1973f)

A search was conducted for the three 9-cm transitions of the ground state Λ-doublet of CH in comet Kohoutek, using the CSIRO 64-m radio telescope and the Onsala Space Observatory's 25.6-m telescope. No lines were detected during the observing periods, and upper limits are given for the corresponding antenna temperatures.     

Overview of groundwater sources and water-supply systems,and associated microbial pollution,in Finland,Norway and Iceland

The characteristics of groundwater systems and groundwater contamination in Finland, Norway and Iceland are presented, as they relate to outbreaks of disease. Disparities among the Nordic countries in the approach to providing safe drinking water from groundwater are discussed, and recommendations are given for the future. Groundwater recharge is typically high in autumn or winter months or after snowmelt in the coldest regions. Most inland aquifers are unconfined and therefore vulnerable to pollution, but they are often without much anthropogenic influence and the water quality is good. In coastal zones, previously emplaced marine sediments may confine and protect aquifers to some extent. However, the water quality in these aquifers is highly variable, as the coastal regions are also most influenced by agriculture, sea-water intrusion and urban settlements resulting in challenging conditions for water abstraction and supply. Groundwater is typically extracted from Quaternary deposits for small and medium municipalities, from bedrock for single households, and from surface water for the largest cities, except for Iceland, which relies almost entirely on groundwater for public supply. Managed aquifer recharge, with or without prior water treatment, is widely used in Finland to extend present groundwater resources. Especially at small utilities, groundwater is often supplied without treatment. Despite generally good water quality, microbial contamination has occurred, principally by norovirus and Campylobacter, with larger outbreaks resulting from sewage contamination, cross-connections into drinking water supplies, heavy rainfall events, and ingress of polluted surface water to groundwater.     

Deep massive sulphide exploration using 2D and 3D geoelectrical and induced polarization data in Skellefte mining district,northern Sweden

Geoelectrical and induced polarization data from measurements along three profiles and from one 3D survey are acquired and processed in the central Skellefte District, northern Sweden. The data were collected during two field campaigns in 2009 and 2010 in order to delineate the structures related to volcanogenic massive sulphide deposits and to model lithological contacts down to a maximum depth of 1.5 km. The 2009 data were inverted previously, and their joint interpretation with potential field data indicated several anomalous zones. The 2010 data not only provide additional information from greater depths compared with the 2009 data but also cover a larger surface area. Several high‐chargeability low‐resistivity zones, interpreted as possible massive sulphide mineralization and associated hydrothermal alteration, are revealed. The 3D survey data provide a detailed high‐resolution image of the top ～450 m of the upper crust around the Maurliden East, North, and Central deposits. Several anomalies are interpreted as new potential prospects in the Maurliden area, which are mainly concentrated in the central conductive zone. In addition, the contact relationship between the major geological units, e.g., the contact between the Skellefte Group and the Jörn Intrusive Complex, is better understood with the help of 2010 deep‐resistivity/chargeability data. The bottommost part of the Vargfors basin is imaged using the 2010 geoelectrical and induced polarization data down to ～1‐km depth.     

Field Investigation of a New Recharge Approach for ASR Projects in Near‐Surface Aquifers

Aquifer storage and recovery (ASR) is the artificial recharge and temporary storage of water in an aquifer when water is abundant, and recovery of all or a portion of that water when it is needed. One key limiting factor that still hinders the effectiveness of ASR is the high costs of constructing, maintaining, and operating the artificial recharge systems. Here we investigate a new recharge method for ASR in near‐surface unconsolidated aquifers that uses small‐diameter, low‐cost wells installed with direct‐push (DP) technology. The effectiveness of a DP well for ASR recharge is compared with that of a surface infiltration basin at a field site in north‐central Kansas. The performance of the surface basin was poor at the site due to the presence of a shallow continuous clay layer, identified with DP profiling methods, that constrained the downward movement of infiltrated water and significantly reduced the basin recharge capacity. The DP well penetrated through this clay layer and was able to recharge water by gravity alone at a much higher rate. Most importantly, the costs of the DP well, including both the construction and land costs, were only a small fraction of those for the infiltration basin. This low‐cost approach could significantly expand the applicability of ASR as a water resources management tool to entities with limited fiscal resources, such as many small municipalities and rural communities. The results of this investigation demonstrate the great potential of DP wells as a new recharge option for ASR projects in near‐surface unconsolidated aquifers.     

Multi‐method virtual electromagnetic experiments for developing suitable monitoring designs: A fictitious CO2 sequestration scenario in Northern Germany

We present a numerical study for 3D time‐lapse electromagnetic monitoring of a fictitious CO₂ sequestration using the geometry of a real geological site and a suite of suitable electromagnetic methods with different source/receiver configurations and different sensitivity patterns. All available geological information is processed and directly implemented into the computational domain, which is discretized by unstructured tetrahedral grids. We thus demonstrate the performance capability of our numerical simulation techniques. The scenario considers a CO₂ injection in approximately 1100 m depth. The expected changes in conductivity were inferred from preceding laboratory measurements. A resistive anomaly is caused within the conductive brines of the undisturbed reservoir horizon. The resistive nature of the anomaly is enhanced by the CO₂ dissolution regime, which prevails in the high‐salinity environment. Due to the physicochemical properties of CO₂, the affected portion of the subsurface is laterally widespread but very thin. We combine controlled‐source electromagnetics, borehole transient electromagnetics, and the direct‐current resistivity method to perform a virtual experiment with the aim of scrutinizing a set of source/receiver configurations with respect to coverage, resolution, and detectability of the anomalous CO₂ plume prior to the field survey. Our simulation studies are carried out using the 3D codes developed in our working group. They are all based on linear and higher order Lagrange and Nédélec finite‐element formulations on unstructured grids, providing the necessary flexibility with respect to the complex real‐world geometry. We provide different strategies for addressing the accuracy of numerical simulations in the case of arbitrary structures. The presented computations demonstrate the expected great advantage of positioning transmitters or receivers close to the target. For direct‐current geoelectrics, 50% change in electric potential may be detected even at the Earth's surface. Monitoring with inductive methods is also promising. For a well‐positioned surface transmitter, more than 10% difference in the vertical electric field is predicted for a receiver located 200 m above the target. Our borehole transient electromagnetics results demonstrate that traditional transient electromagnetics with a vertical magnetic dipole source is not well suited for monitoring a thin horizontal resistive target. This is due to the mainly horizontal current system, which is induced by a vertical magnetic dipole.     

The use of mycorrhiza for eco‐engineering measures in steep alpine environments: effects on soil aggregate formation and fine‐root development

Steep erosion‐prone and vegetation‐free slopes are widespread in alpine areas and are often discussed since they have a high socio‐economic damage potential. We present an eco‐engineering approach to test whether a mycorrhizal inoculum improves the establishment of hedge brush layers and in turn soil structural stability on a steep, coarse‐grained vegetation‐free slope in the eastern Swiss Alps. We established (i) mycorrhizal and (ii) non‐mycorrhizal treated eco‐engineered research plots on a field experimental scale, covering a total area of approximately 1000 m² on an east‐northeast (ENE) exposed slope, where many environmental parameters can be regarded as homogeneous. After a full vegetation period, we quantified soil aggregate stability, the formation of water stable aggregates and the fine‐root development. Our results illustrate that the establishment of brush layers without mycorrhizal inoculum increased aggregate stability significantly. Against our expectation and glasshouse experiments, the addition of mycorrhizal inoculum did not have a statistically significant effect after one vegetation period although it tended to increase aggregate stability. Analogously, root length density (RLD) tended to be higher at the non‐mycorrhizal treated site. Aggregate stability was significantly correlated with RLD. Studies on a bigger field experimental scale are inevitable, complement glasshouse studies and lead to a better understanding for a successful application of sustainable eco‐engineering measures in alpine environments. Based on our results and considering the fact that the response time in natural ecosystems may be slower than in laboratory approaches, we conclude that long‐term field studies are necessary to validate results gained through laboratory experiments. Copyright © 2014 John Wiley & Sons, Ltd.     

The “Triasscholle” near Greiz,Germany—a volcanic origin?

Near the city of Greiz in Eastern Thuringia, Germany, there is a stratigraphically non-coherent breccia encased in shales from the Lower Carboniferous that includes larger blocks of Triassic sediments, the so-called Triasscholle. The origin of this breccia has previously been interpreted tectonically. The geophysical methods of geomagnetics and gravimetry have recently been applied to the area. We found that the formation is characterised by a lack of a magnetic anomaly, but it has a distinct, spatially small gravity anomaly of approximately ?2 mGal and whose shape hints at a structure about twice the previously suggested size. Most of the geological information available is derived from older drill cores located in the southwest part near the previously assumed margin. Scanning electron microscope (SEM) investigations on drill core samples from the polymict breccia at different depths show a cataclastic deformation of carbonate grains in the upper parts, while we find hypidiomorphic and idiomorphic zoned carbonate grains featuring a dolomitic/calcitic composition within the core as well as rims of ankeritic composition hinting at intense hydrothermal influence. The breccia itself contains granitoidic xenoliths from greater depths, which indicate upward transport processes. This and plastic deformation below 95m depth, both on macroscopic and microscopic scales, indicates an anomalous increase of heat with depth and material transport from depth. Judging from the gravimetric minimum and the SEM investigations on the breccia samples, we assume the Triasscholle near Greiz to be a deeply eroded maar-diatreme volcano. From pollen analysis results on the matrix, the formation can be considered Santonian or younger in age (≤85 Ma). Most interesting are the alteration of the mainly carbonatic components of the breccia, the deep erosion level of the diatreme and the multidisciplinary approach towards the reinterpretation of this formerly misinterpreted structure.     

Relevance of Deterministic Structures for Modeling of Transport: The Lauswiesen Case Study

Knowledge of site‐specific contaminant transport processes is an essential requirement for performing various tasks concerning the protection and management of groundwater resources. However, prediction of their behavior is often difficult, especially in heterogeneous aquifers because of the lack of information about flow‐ and transport‐governing subsurface structures and parameters. Hence, stochastic approaches have been developed and frequently used. However, extensive modeling studies on sedimentary structures have shown that consideration of hydrogeological subunits and their distribution can be essential for transport modeling. A case study from the intensely investigated Lauswiesen site is used to demonstrate that more accurate predictions are possible with improved knowledge of deterministic structures. Results of this case study using direct‐push injection logging (DPIL) provide a more reliable characterization of hydraulic conductivity than sieve and flow meter data.     

Radial Basis Functional Link Nets Used as a Prospectivity Mapping Tool for Orogenic Gold Deposits Within the Central Lapland Greenstone Belt, Northern Fennoscandian Shield

Among the more popular spatial modeling techniques, artificial neural networks (ANN) are tools that can deal with non-linear relationships, can classify unknown data into categories by using known examples for training, and can deal with uncertainty; characteristics that provide new possibilities for data exploration. Radial basis functional link nets (RBFLN), a form of ANN, are applied to generate a series of prospectivity maps for orogenic gold deposits within the Paleoproterozoic Central Lapland Greenstone Belt, Northern Fennoscandian Shield, Finland, which is considered highly prospective yet clearly under explored. The supervised RBFLN performs better than previously applied statistical weights-of-evidence or conceptual fuzzy logic methods, and equal to logistic regression method, when applied to the same geophysical and geochemical data layers that are proxies for conceptual geological controls. By weighting the training feature vectors in terms of the size of the gold deposits, the classification of the neural network results provides an improved prediction of the distribution of the more important deposits/occurrences. Thus, ANN, more specifically RBFLN, potentially provide a better tool to other methodologies in the development of prospectivity maps for mineral deposits, hence aiding conceptual exploration.     

Assembly and concept of a web-based GIS within the paleolimnological project CONTINENT (Lake Baikal,Russia)

Web-based Geographical Information Systems (GIS) are excellent tools within interdisciplinary and multi-national geoscience projects to exchange and visualize project data. The web-based GIS presented in this paper was designed for the paleolimnological project ‘High-resolution CONTINENTal paleoclimate record in Lake Baikal’ (CONTINENT) (Lake Baikal, Siberia, Russia) to allow the interactive handling of spatial data. The GIS database combines project data (core positions, sample positions, thematic maps) with auxiliary spatial data sets that were downloaded from freely available data sources on the world wide web. The reliability of the external data was evaluated and suitable new spatial datasets were processed according to the scientific questions of the project. GIS analysis of the data was used to assist studies on sediment provenance in Lake Baikal, or to help answer questions such as whether the visualization of present-day vegetation distribution and pollen distribution supports the conclusions derived from palynological analyses. The refined geodata are returned back to the scientific community by using online data publication portals. Data were made citeable by assigning persistent identifiers (DOI) and were published through the German National Library for Science and Technology (TIB Hannover, Hannover, Germany).