Comparison of an Electrochemical and Luminescence‐Based Oxygen Measuring System for Use in the Biodegradability Testing According to Closed Bottle Test (OECD 301D)

The effects of persistent organic pollutants on the aquatic environment still can hardly be assessed. Therefore, ready biodegradability is a desired key characteristic of chemicals. Accordingly, biodegradation testing is of utmost importance and is a vital part within the risk assessment for organic chemicals. In the closed bottle test (CBT; OECD 301D) the degree of biological degradation of a chemical is assessed by monitoring the oxygen consumption so far with a Clark electrode as standard method. However, this method is time‐consuming, laborious and led to frequent fluctuations of the test results, which limited their validity. Due to these shortcomings, an optical system that enables contact‐free measuring of the oxygen concentration in a closed bottle, based on dynamic luminescence quenching, was examined. The test results were compared to those obtained with the “classical” electrochemical technique (Clark electrode). At first, a basic standard for the handling of the new instrument in the laboratory was developed. Then possible influencing factors, reliability, comparability, and reproducibility of the test results were investigated by running the CBTs in parallel with the electrode and optode method. The findings proved the new optode method to be unambiguously superior to the electrode technique. The frequency of fluctuations of the test results and time and effort necessary for the test run could considerably be reduced. The degradation kinetics of the test substances could be followed easily in the CBT by increasing the measuring points without much additional effort.     

Utilizing Natural Liner Materials for Heavy Metal Removal in Simulated Landfill Conditions

Inorganic industrial waste landfills have the potential to contaminate subsurface groundwater supplies through migration of leachates down to the water table and into groundwater aquifers, despite the use of compacted low permeability clay or polyethene liners. This paper aims the removal of Cu²⁺ and Zn²⁺ in the leachate from an industrial waste landfill using natural materials (natural zeolite, expanded vermiculite, pumice, illite, kaolinite, and bentonite) as a liner material. Cu²⁺ and Zn²⁺ concentrations for all treatments decreased during the process. Of all the different natural materials, natural zeolite, expanded vermiculite and pumice, with bentonite, were effective in removing Cu²⁺ and Zn²⁺ present in the leachate. However, the use of illite and kaolinite with bentonite as liner materials could be of disadvantage in Cu²⁺ and Zn²⁺ removal from leachate. The adsorption kinetic models were also tested for the validity. The second order kinetics with the high correlation coefficients best described adsorption kinetic data.     

Reliable Procedure for Molecular Analysis of Airborne Microflora in Three Indoor Environments: An Office and Two Different Museum Contexts

Biological aerosols from air constitute a significant source of exposure to microorganisms in public places. Airborne microorganisms are involved in the development of certain respiratory symptoms, allergies, or infections among users and occupants. Various sampling instruments have commonly been used in aerobiology to collect bacteria and fungi suspended in the air. The objective of this study was to develop a reliable procedure for sampling in indoor public environments presenting different levels of occupancy, airborne bacteria and fungi to be subjected to molecular analysis (bacteria and fungi quantitative PCR, capillary electrophoresis single strand conformation polymorphism fingerprinting). Four different sampling devices were tested in situ in an office building (open‐plan type) and the sampling strategy chosen was tested in two museum contexts. In accordance with the drawbacks involved to our study (quantitative and qualitative aspects, cost, and overcrowding), cyclone device appeared to be most suitable. The results underline the effectiveness of this high‐volume aerosol sampling device for both qualitative and quantitative molecular analysis. Four in situ sampling collections were carried out in 1 day in the Louvre Museum to study quantitative and qualitative variations of airborne bacterial and fungal diversity. The quantitative results revealed a similar order of magnitude for the numbers of both bacteria and fungi. In the Louvre Museum, the samples yielded between 3.7 × 10⁴ and 4.1 × 10⁴ genome equivalent (GE) bacteria/m³ air and between 5.0 × 10⁴ and 5.9 × 10⁴ GE fungi/m³ air and in the Decorative Arts Museum between, 2.1 × 10⁴ and 2.5 × 10⁴ GE bacteria/m³ air and between 1.4 × 10⁴ and 1.7 × 10⁴ GE fungi/m³ air. The results also indicate that the dominant bacterial community displayed a stable structure over a short period of time whereas dominant eukaryotic airborne community appeared more variable.     

Adsorption Kinetics of Chloroform from Aqueous Solutions onto Activated Lignite

The lignite coal researched by this study was subjected to a two‐stage activation process performed in the scope of obtaining active carbon from domestic resources. “Activation” and “carbonization” stages were used in the experiments. The modified lignite was produced by impregnating lignite with KOH and washing the activation product with 15% HCl solution after thermal treatment. Increasing KOH dosage also increased the removal efficiency. The variables investigated in adsorption experiments were contact time, initial concentration, pH, and sorbent dosage. Adsorption kinetics was fitted by using the pseudo‐first‐order equation, pseudo‐second‐order equation, and intra‐particle diffusion. Isotherm modeling was carried out using Langmuir, Freundlich, and Dubinin–Radushkevich equations. Selected target compound in this work is common environmental pollutant in waters. A commonly known effect of chloroform is its carcinogenic effect. Therefore, removal of these compounds from water is considerably important. Chloroform removal of 97% for was achieved by the use of Konya region activated lignite.     

Simultaneous Determination of 11 Sulfonamides by HPLC–UV and Application for Fast Screening of Their Aerobic Elimination and Biodegradation in a Simple Test

Sulfonamides (SAs) are one of the most frequently used antibiotics. SAs have been found in various environmental compartments. If SAs are not degraded in the environment, they can affect bacteria by their antibiotic properties and contribute to bacterial antibiotic resistance. Therefore, the biodegradability of 11 SAs (sulfanilamide, sulfaguanidine monohydrate, sulfadiazine, sulfathiazole, sulfapyridine, sulfamerazine, sulfamethoxypyridazine, sulfachloropyridazine, sulfamethazine, sulfamethoxazole, and sulfadimethoxine) was studied. For this purpose, the Closed Bottle Test (CBT, OECD 301D) was performed, which includes a toxicity control. In order to monitor the environmental fate of the parent compound and to check for transformation products, a simple, efficient, and reliable HPLC–UV method for the simultaneous determination of these SAs has been developed. Acetonitrile and water (with 0.1% formic acid) were used as mobile phase solvents for gradient elution. The method was validated in terms of precision, detection and quantitation limits, selectivity, and analytical solution stability. In the CBT, none of these SAs was readily biodegradable. The HPLC–UV analysis confirmed that no degradation of any SA took place. In the toxicity control, these SAs showed no toxic effect in the used concentration of environmental bacteria applied in the test.     

Untangling the influence of in-lake productivity and terrestrial organic matter flux on 4,250 years of mercury accumulation in Lake Hambre, Southern Chile

There is ongoing debate about the relative influence of aquatic production, flux, and sedimentation of aquatic and terrestrial organic matter on mercury accumulation in lake sediments. In this study, lake sediments spanning the past 4,250 years, were collected from remote, organic-rich Lake Hambre, Patagonia (53° S) and investigated for changes in the accumulation of pre-anthropogenic mercury and organic matter of aquatic and terrestrial origin. Natural mercury accumulation varied by up to a factor of four, comparable to the recent anthropogenic forcing of the mercury cycle (factor 3–5). Hydrogen and Oxygen indices (HI and OI, Rock–Eval©) and nitrogen/carbon ratios of the organic matter, combined with multi-element sediment data, reveal intense changes in aquatic productivity as well as influx of terrestrial organic matter into the lake. Evaluation of the multi-element dataset using Principal Component Analysis shows clear covariation of mercury with other soil-derived elements such as copper and yttrium. This covariance reflects a common transport mechanism, i.e. leaching of trace-element-bearing organic matter complexes from catchment soils. Correlation between changes in aquatic productivity and mercury concentrations occurs in some sections of the record, but we do not suggest they are linked by a direct causal relationship. Mass balance approaches suggest that mercury scavenging and accumulation in this organic-rich lake is controlled by the supply of mercury from catchment soils rather than the amount of organic material produced within the water column. A common controlling mechanism, i.e. changing climate, however, is thought to independently drive variations in both the flux of terrestrial organic matter mercury complexes and aquatic productivity.     

Sea‐level and ocean‐current control on carbonate‐platform growth,Maldives, Indian Ocean

Multichannel high‐resolution seismic and multibeam data were acquired from the Maldives‐isolated carbonate platform in the Indian Ocean for a detailed characterization of the Neogene bank architecture of this edifice. The goal of the research is to decipher the controlling factors of platform evolution, with a special emphasis on sea‐level changes and changes of the oceanic currents. The stacking pattern of Lower to Middle Miocene depositional sequences, with an evolution of a ramp geometry to a flat‐topped platform, reflects variations of accommodation, which here are proposed to be primarily governed by fluctuations of relative sea level. Easterly currents during this stage of bank growth controlled an asymmetric east‐directed progradation of the bank edge. During the late middle Miocene, this system was replaced by a twofold configuration of bank development. Bank growth continued synchronously with partial bank demise and associated sediment‐drift deposition. This turnover is attributed to the onset and/or intensification of the Indian monsoon and related upwelling and occurrence of currents, locally changing environmental conditions and impinging upon the carbonate system. Mega spill over lobes, shaped by reversing currents, formed as large‐scale prograding complexes, which have previously been interpreted as deposits formed during a forced regression. On a regional scale, a complex carbonate‐platform growth can occur, with a coexistence of bank‐margin progradation and aggradation, as well as partial drowning. It is further shown that a downward shift of clinoforms and offlapping geometries in carbonate platforms are not necessarily indicative for a sea‐level driven forced regression. Findings are expected to be applicable to other examples of Cenozoic platforms in the Indo‐Pacific region.     

Hypercube-Based Visualization Architecture for Web-Based Environmental Geospatial Information Systems

The geospatial field significantly influences the development of the environmental domain, including a wide range of geospatial and cartographic information systems, such as Geographic Information Systems (GIS), Multimedia Atlas Information Systems (MAIS) and more recently web-based GIS (Web-GIS). In this context, we introduce web-based environmental geospatial information systems (Web-EGIS) as a special case of Web-GIS, aiming to integrate the functionalities of geospatial information systems with the enormous quantity of specialized, distributed and highly heterogeneous environmental geo-referenced data and services. We define three main characteristics of the Web-EGIS. The first is a generic hypercube-based data organization and visualization. The next characteristic is a standard-based, three-tier service-oriented architecture. The third and last characteristic is the traceability of the architectural and design decisions, for which we introduce the new concept of an ‘Environmental Application Context’, arguing that not only the functional but also the non-functional requirements (NFRs) have an important role in defining the architecture, software components and data services of such systems. In a nutshell, a Web-EGIS is characterized by a coherent user experience through the hypercube-based visualization concept, technically supported by a service-oriented architecture that is structured according to an extensive analysis of NFRs. On this basis, we introduce the Geodata visualization and interactive training environment (GeoVITe) Platform for Interdisciplinary Environmental Research as a reference implementation of a Web-EGIS with its basic design requirements, integrative hypercube-based visualization for heterogeneous data sources, extended web cartography functionalities, and its de facto system architecture. The concept of the hypercube-based visualization is better transferred to the system architecture by understanding the ‘Environmental Application Context’ of this particular Web-EGIS, which also makes it easier to maintain and enhance. The resulting system is a support platform for research activities in the environmental domain.     

From data to decision-making – experiences in Integrated Earth Observation (IEO)

Within the confines of Earth Observation Scientific Knowledge and Technology Transfer in Hungary (EKAT) titled ESA PECS project we gained forum for utilization of our earth observation (EO) knowledge and possibility for further development of experiences. The project aims the horizontal preparation of Hungary for ESA membership – for a dynamically developing sphere in the common part of science, technology and business. For the efficient transfer and dissemination, we preconceived target groups and principles to reach main take-up points and to open new forums of information exchange. Nowadays, user-friendly service, complex supply and real-validation process all have great importance. Joining units of suitable data choice, entire ingestion–processing chains and ergonomic interfaces can only offer a timely and professional solution for the challenges of industry and business sectors. It has to be clearly seen, that information and communication technologies (ICT) and information control becomes a more and more significant part of EO services.