Bioaccumulation of nitroarenes in bivalves at Osaka Bay, Japan

This paper reports for the first time the detection and occurrence of nitroarenes (NPAHs) in marine organisms. Mussels and oysters collected from Osaka Bay, Japan, had total NPAHs concentrations that ranged from 2380 to 24,688 pg/g dry and 2672 to 25,961 pg/g dry, respectively. Relatively higher concentrations were detected in sampling sites located near the central district and suburbs of Osaka City implying that the most probable sources of NPAHs in the two bivalves are exhaust gases and smokes emitted by automobiles and industrial plants. Bivalves had relatively higher residues of 1-nitronaphthalene, 2-nitronaphthalene, 3-nitrophenanthrene, and 9-nitrophenanthrenes. Residues of 2-nitrofluorene, 1-nitropyrene, 4-nitropyrenes, and 6-nitrochrysene were much lower compared to nitronaphthalenes and nitrophenanthrenes. Inter-species differences was only observed for 2-nitronaphthalene with oysters exhibiting significantly higher residues than mussels.     

Experiment study on RC frame retrofitted by the external structure

A new retrofitting method is proposed herein for reinforced concrete (RC) structures through attachment of an external structure. The external structure consists of a fiber concrete encased steel frame, connection slab and transverse beams. The external structure is connected to the existing structure through a connection slab and transverse beams. Pseudostatic experiments were carried out on one unretrofitted specimen and three retrofitted frame specimens. The characteristics, including failure mode, crack pattern, hysteresis loops behavior, relationship of strain and displacement of the concrete slab, are demonstrated. The results show that the load carrying capacity is obviously increased, and the extension length of the slab and the number of columns within the external frame are important influence factors on the working performance of the existing structure. In addition, the displacement difference between the existing structure and the outer structure was caused mainly by three factors: shear deformation of the slab, extraction of transverse beams, and drift of the conjunction part between the slab and the existing frame. Furthermore, the total deformation determined by the first two factors accounted for approximately 80% of the damage, therefore these factors should be carefully considered in engineering practice to enhance the effects of this new retrofitting method.     

Continuous Measurement of Number Concentrations and Elemental Composition of Aerosol Particles for a Dust Storm Event in Beijing

A continuous measurement of number size distributions and chemical composition of aerosol particles was conducted in Beijing in a dust storm event during 21-26 March 2001. The number concentration of coarse particles （ 〉2μm） increased more significantly than fine particles （ 〈2μm） during the dust storm due to dust weather, while the anthropogenic aerosols collected during the non-dust-storm period tended to be associated with fine particles. Elemental compositions were analyzed by using proton-induced X-ray emission （PIXE）. The results show that 20 elements in the dust storm were much higher than in the non-dust-storm period. The calculated soil dust concentration during the dust storm was, on average, 251.8μg m^-3, while it was only 52.1μg m^-3 on non-dust-storm days. The enrichment factors for Mg, A1, P, K, Ca, Ti, Mn, Fe, C1, Cu, Pb, and Zn show small variations between the dust storm and the non-dust-storm period, while those for Ca, Ni and Cr in the dust storm were much lower than those in the non-dust-storm period due to significant local emission sources. A high concentration and enrichment factor for S were observed during the dust storm, which implies that the dust particles were contaminated by aerosol particles from anthropogenic emissions during the long-range transport. A statistical analysis shows that the elemental composition of particles collected during the dust storm in Beijing were better correlated with those of desert soil colleted from desert regions in Inner Mongolia. Air mass back-trajectory analysis further confirmed that this dust storm event could be identified as streaks of dust plumes originating from Inner Mongolia.     

岱海与太湖沉积物焦碳和烟炱最近200年历史对比研究

黑碳是不完全燃烧产生的一种难熔的含碳物质的连续统一体,由焦碳（char）和烟炱（soot）组成。岱海与太湖沉积物焦碳和烟炱浓度对比显示,两个湖泊焦碳浓度和通量变化受局地火事件影响,无明显的规律;  而烟炱具有相似的变化历史,主要反映在1970年代后期急剧升高,与中国工业化历史一致。烟炱粒径细小,具区域传输特点,可以通过沉积物指示大气烟炱。结合当前大气气溶胶烟炱浓度,恢复了岱海与太湖地区最近200年来的大气烟炱浓度。其变化趋势与200年来北半球温度对比显示,大气烟炱中的高浓度对应于高温,低浓度对应低温。这种历史关系进一步证实大气烟炱在全球增温中具有极其重要的作用。     

Distributions of polycyclic aromatic hydrocarbons and alkylated polycyclic aromatic hydrocarbons in Osaka Bay,Japan

Contaminations in sediments by polycyclic aromatic hydrocarbons (PAHs) and alkylated PAHs were investigated at 44 sites in Osaka Bay, Japan. Concentrations of total PAHs and alkylated PAHs were in the range 6.40–7800 ng/g dry weights and 13.7–1700 ng/g dry weights, respectively. The PAH concentrations tended to be higher along the shoreline in the vicinities of big ports, industrialized areas, and densely populated regions such as the cities of Osaka and Kobe. The major sources appeared to be pyrogenic or both pyrogenic and petrogenic at most of the sites. PAH concentrations were remarkably high at a site near Kobe, where the concentrations of dibenzo(a,h)anthracene and benzo(g,h,i)perylene exceeded the effects-range-medium concentration and eight PAHs were above the corresponding effects-range-low concentrations. Those PAHs may have been derived from the great fire associated with the large earthquake in 1995.     

In situ strength measurements on natural upper-mantle minerals

Using in situ strength measurements at pressures up to 10 GPa and at room temperature, 400, 600, and 700°C, we examined rheological properties of olivine, orthopyroxene, and chromian-spinel contained in a mantle-derived xenolith. Mineral strengths were estimated using widths of X-ray diffraction peaks as a function of pressure, temperature, and time. Differential stresses of all minerals increase with increasing pressure, but they decrease with increasing temperature because of elastic strain on compression and stress relaxation during heating. During compression at room temperature, all minerals deform plastically at differential stress of 4–6 GPa. During subsequent heating, thermally induced yielding is observed in olivine at 600°C. Neither orthopyroxene nor spinel shows complete stress relaxation, but both retain some stress even at 700°C. The strength of the minerals decreases in the order of chromian-spinel ≈ orthopyroxene > olivine for these conditions. This order of strength is consistent with the residual pressure of fluid inclusions in mantle xenoliths.     

Mass Concentration and Mineralogical Characteristics of Aerosol Particles Collected at Dunhuang During ACE-Asia

Measurements were performed in spring 2001 and 2002 to determine the characteristics of soil dust in the Chinese desert region of Dunhuang, one of the ground sites of the Asia-Pacific Regional Aerosol Characterization Experiment (ACE-Asia). The mean mass concentrations of total suspended particle matter during the spring of 2001 and 2002 were 317 μg m?3 and 307 μg m?3, respectively. Eleven dust storm events were observed with a mean aerosol concentration of 1095 μg m?3, while the non-dusty days with calm or weak wind speed had a background aerosol loading of 196 μgm?3 on average in the springtime. The main minerals detected in the aerosol samples by X-ray diffraction were illite, kaolinite, chlorite, quartz, feldspar, calcite and dolomite. Gypsum, halite and amphibole were also detected in a few samples. The mineralogical data also show that Asian dust is characterized by a kaolinite to chlorite (K/C) ratio lower than 1 whereas Saharan dust exhibits a K/C ratio larger than 2. Air mass back-trajectory analysis show that three families of pathways are associated with the aerosol particle transport to Dunhuang, but these have similar K/C ratios, which further demonstrates that the mineralogical characteristics of Asian dust are different from African dust.     

ACTIVE system for monitoring volcanic activity: A case study of the Izu-Oshima Volcano,Central Japan

A system is proposed for the monitoring of changes in the underground structure of an active volcano over time by applying a transient electromagnetic method. The monitoring system is named ACTIVE, which stands for Array of Controlled Transient-electromagnetics for Imaging Volcano Edifice. The system consists of a transmitter dipole used to generate a controlled transient electromagnetic (EM) field and an array of receivers used to measure the vertical component of the transient magnetic field at various distances, with automatic operation of both units. In order to verify the performance of the proposed system, numerical and field experiments were carried out by application of the system to the Izu-Oshima volcano, where a remarkable change in the apparent DC resistivity over time had been detected in association with the eruption in 1986.     

Construction of Structural Geological Model Using Monte Carlo Simulation

Geotechnical and Geological Engineering - To optimize the prediction of structural geological conditions in the underground as of data collected at the surface, due to the usual great uncertainties...