Numerical analysis and validation of weakly nonlinear ship motions and structural loads on a modern containership

This paper aims to validate a numerical seakeeping code based on a 3D Rankine panel method by comparing its results with experimental data. Particularly, the motion response and hull-girder loads on a real modern ship, a 6500 TEU containership, are considered in this validation study. The method of solution is a 3D Rankine panel method which adopts B-spline basis function in the time domain. The numerical code is based on the weakly nonlinear scheme which considers nonlinear Froude-Krylov and restoring forces. The main focus of this study is given to investigate the nonlinear characteristics of wave-induced loads, and to validate this present scheme for industrial use in the range of low Froude number. The comparisons show that the nonlinear motions and hull-girder loads, computed by the present numerical code, have good overall agreements with experimental results. It is found that, for the better accuracy of computational results, particularly at extreme waves in oblique seas, the careful treatment of soft-spring (or compatible) system is recommended to the control of non-restoring motions such as surge, sway, and yaw.     

A review of jet grouting practice and development

The jet grouting technique was originally initiated in the UK and progressively developed following the needs for larger geometries, ease of implementation, economic rationality, and better mechanical properties. This paper presents a comprehensive review of the development and practice of jet grouting through some fundamental concepts and relevant case studies. Subsequently, a laboratory testing program is performed to investigate the factors affecting the efficacy of the twin grouting system. The principal objective of this study is to define the suitable conditions for the jet grouting efficacy regarding economic rationality as well as quality control. For the first phase, a particular emphasis is placed on the properties of jet columns, site geological conditions, implementation methods, and the justification of each selected treatment option, while the second phase mainly focuses on the unconfined compressive strength (UCS) tests. It follows that the mono-fluid jet grouting system presents a valuable flexibility in dealing with complex configurations; yet, the double- and triple-fluid systems are more indicated for cases of mass treatments for which large portions of space must be treated and overlapping is fundamentally important for the reliability of the treatment. Furthermore, it was established that the efficacy of the twin-jet method primarily relies on the proper adequacy of some critical parameters, namely, the cement content, the water-cement ratio, and cement slurry-water glass ratio. In spite of some uncertainties inherently related to the technique, the UCS test represents the quintessential laboratory index for evaluating the mechanical properties of grouted elements, deriving jet grouting efficacy and the economics of jet grouts.     

Fluxes and sources of suspended organic matter in an estuarine turbidity maximum region during low discharge conditions

Water column concentrations of total suspended solids (TSS), particulate organic carbon (POC) and particulate nitrogen (PN) were measured at three different depths in four different locations bracketing the estuarine turbidity maximum (ETM) along the main channel of a temperate riverine estuary (Winyah Bay, South Carolina, USA). Measurements were carried out over full tidal cycle (over 24 h). Salinity, temperature, current magnitude and direction were also monitored at the same time throughout the water column. Tidally averaged net fluxes of salt, TSS, POC and PN were calculated by combining the current measurements with the concentration data. Under the extreme low river discharge conditions that characterized the study period, net landward fluxes of salt were measured in the lower part of the study area, suggesting that the landward transport through the main channel of the estuary was probably balanced by export out through the sides. In contrast, the net fluxes of salt in the upper reaches of the study area were near zero, indicating a closed salt balance in this part of the estuary. In contrast to salt, the net fluxes of TSS, POC and PN in the deeper parts of the water column were consistently landward at all four sites in Winyah Bay indicating the non-conservative behavior of particulate components and their active transport up the estuary in the region around the ETM.The carbon contents (%POC), carbon:nitrogen ratios (org[C:N]a) and stable carbon isotopic compositions (δ¹³C_POC) of the suspended particles varied significantly with depth, location and tidal stage. Tidally averaged compositions showed a significant increase up the estuary in the %POC and org[C:N]a values of suspended particles consistent with the preferential landward transport of carbon-rich particles with higher vascular plant debris content. The combination of tidal resuspension and flood-dominated flow appeared to be responsible for the hydrodynamic sorting of particles along the estuary that resulted in denser, organic-poor particles being transported landward less efficiently. The elemental and isotopic compositions indicated that vascular C₃ plants and estuarine algae were the major sources of the particulate organic matter of all the samples, without any significant contributions from salt marsh C₄ vegetation (Spartina alterniflora) and/or marine phytoplankton.     

Spatio-temporal variations of optical properties of aerosols in East Asia measured by MODIS and relation to the ground-based mass concentrations observed in central Korea during 2001∼2010

Long-term variations and trends of atmospheric aerosols in the East Asian region were analyzed by using aerosol optical depth (AOD or τ), and ångström exponent (AE or α) obtained from the Moderate Resolution Imaging Spectroradiometer (MODIS) from 2001 to 2010. The increased emission of anthropogenic fine aerosols in east China resulted in the high AOD in this region during summer. The steady increasing emission of anthropogenic fine aerosols caused an increasing trend of AOD in east China, and the large-scale transport of sandstorms and smoke plume caused by forest fires affected intense inter-annual variations of AOD in the East Asian region. While in the central part of South Korea, located in the lee side of the East Asian continent, AE tended to rise to a level higher than in east China, the ground-based mass concentrations continued to decline. A noticeable decrease of PM10 mass concentration in spring and winter in central Korea is most likely attributable to decreases in sandstorms in the source region of East Asia. However, the ratio of PM2.5 mass concentration to PM10 increases overall with a high level in summer. Aerosol types were classified into dust, smoke plume, and sulphate by using satellite data over Cheongwon in central Korea. The columnar AOD, with different aerosol types, was compared with the ground-based mass concentrations at Cheongwon, and the relatively high level of the correlations presented between PM2.5 and AOD produced in sulphate. Growth and increases of fine hygroscopic aerosols generated as gas-to-particle conversion particularly in summer contribute to increases of columnar AOD in the East Asian region.     

Mineralogical and geochemical characterization of precipitates on stream receiving acid mine water, Korea

Seasonal variations of water chemistry occurred in acid mine drainage receiving mine and leachate water. Sulfate and metal concentrations were low in winter but high in spring and summer. Mine waters were highly acidic (up to pH 3.4) in nature with high concentrations of manganese, copper and zinc but high electrical conductivity and sulfate in leachate. The blue and brownish yellow precipitates were formed under different chemical environments of acid mine drainage. Brownish yellow (Munsell color 7.5YR 8/12), blue (Munsell color 2.5B 9/7) and light blue (Munsell color 2.5B 9/3) precipitates deposited on the stream bottom receiving acid mine water. The brownish yellow precipitates formed in the acid mine water, whereas the blue and light blue precipitates formed in the leachate water. The brownish yellow precipitates consisted mainly of ferrihydrite, whereas the blue and light blue precipitates consisted of glaucocerinite and/or woodwardite.     

Satellite and ground observations for large-scale air pollution transport in the Yellow Sea region

Large-scale air pollution transport (LSAPT) in the Yellow Sea region and their inflow onto the Korean Peninsula were observed through satellite images and ground measurements. LSAPT includes regional continental air-masses saturated with pollutants originating from China and subsequently landing on or passing through the Korean Peninsula. It is also possible to identify the distribution and transport patterns of LSAPT over the Yellow Sea. The ground concentrations for PM10, PM2.5 and CO measured at Cheongwon, located in the centre of south Korea, were compared with NOAA satellite images. Notably, the episodes observed of the LSAPT show a PM2.5 to PM10 ratio of 74% of the daily maximum concentrations. However, cases of duststorms were clearly distinguished by much higher PM10 concentrations and a ratio of 30% of PM2.5 to PM10 for daily maximum concentrations. For the episode on January 27, 2006, the inflow of a regionally polluted continental air-mass into the central and southwestern regions of the Korean Peninsula was observed sequentially at various ground observatories as well as by satellite. The north airflow dissipated the clouds over Mt. Halla on Jeju Island and further downwind, reducing air pollution and creating a von Kármán vortex.     

Effects of natural and calcined oyster shells on Cd and Pb immobilization in contaminated soils

In Korea, soils adjacent to abandoned mines are commonly contaminated by heavy metals present in mine tailings. Further, the disposal of oyster shell waste by oyster farm industries has been associated with serious environmental problems. In this study, we attempted to remediate cadmium (Cd)- and lead (Pb)-contaminated soils typical of those commonly found adjacent to abandoned mines using oyster shell waste as a soil stabilizer. Natural oyster shell powder (NOSP) and calcined oyster shell powder (COSP) were applied as soil amendments to immobilize Cd and Pb. The primary components of NOSP and COSP are calcium carbonate (CaCO₃) and calcium oxide (CaO), respectively. X-ray diffraction, X-ray fluorescence and scanning electron microscope analyses conducted in this study revealed that the calcination of NOSP at 770°C converted the less reactive CaCO₃ to the more reactive CaO. The calcination process also decreased the sodium content in COSP, indicating that it was advantageous to use COSP as a liming material in agricultural soil. After 30 days of incubation, we found that the 0.1 N HCl-extractable Cd and Pb contents in soil decreased significantly as a result of an increase in the soil pH and the formation of metal hydroxides. COSP was more effective in immobilizing Cd and Pb in the contaminated soil than NOSP. Overall, the results of this study suggest that oyster shell waste can be recycled into an effective soil ameliorant.     

Tephrostratigraphy and paleo-environmental implications of Late Quaternary sediments and interstitial water in the western Ulleung Basin, East/Japan Sea

Two piston cores, collected from the western Ulleung Basin of the East/Japan Sea, were used to investigate the Late Quaternary tephrostratigraphy, lithology, and mineralogy of the sediments, as well as the elemental composition of both sediments and interstitial water, and their paleo-environmental implications. The cores show two lapilli tephra layers and one rhyolitic ash layer at the boundaries between sedimentary lithofacies units I, II, and III. These layers can be correlated with the well-known Ulleung-Oki (ca. 9.3 ka; boundary of units I/II), Ulleung-Yamato (ca. 25–33 ka), and Aira-Tanzawa (ca. 25.1 ka; boundary of units II/III) layers, respectively. These data suggest that the cores cover the period from the middle stage of marine isotope stage (MIS) 3 to the Holocene. In each core, a so-called dark laminated mud (DLM) layer in unit II commonly has high contents of Si and Al, suggesting that the DLM layer generally contains significant amounts of fine-grained silicates and/or aluminosilicates. In addition, these DLM layers are enriched in Fe relative to Mn, iron being predominantly bound in framboidal pyrite. The size distribution of pyrite in the DLM layers suggests that these have formed under anoxic (euxinic) conditions at times of reduced water circulation in the basin during sea-level lowstand (euxinic environment). The C/N ratios [5–12] suggest that sedimentary organic matter in the cores is predominantly of marine origin. Total organic carbon (TOC) contents increased shortly before Termination I. This could have been caused by an increased flux of marine organic matter in association with sea-level rise. The C and S values of units II and III (Late Pleistocene sediments; C: <2.0%; S: 0.5–2.1%) suggest a more euxinic environment than that of unit I (Holocene sediments; C: 1.0–3.5%; S: <1.0%). Concentrations of SO₄^2– in the interstitial water decrease with increasing burial depth, whereas CH₄ concentrations show the reverse trend. Therefore, it seems that sulfate reduction, probably related to microbial activity, predominates in the upper core sections (<5 m), shifting to methanogenesis in the lower core sections.     

Anomalous increase in the foF2 critical frequency prior to the Spanish earthquake of May 11, 2011

A study of variations in the critical frequency of the F2 layer (foF2) prior to a shallow-focus eartquake with a magnitude M = 5.1 which occurred in Spain on May 11, 2011, is carried out. The obtained results show that a positive disturbance in the foF2 value was observed at the ionospheric Del’ebre station, which is the closest to the earthquake epicenter. At the same time, no disturbances in foF2 are revealed at ionospheric stations located at a greater distance from the epicenter. This fact makes it possible to conclude that the positive disturbance in the F2 layer observed at the Del’ebre station could have a sesmogenic nature.