Development of Analytical Models to Estimate Pile Setup in Cohesive Soils Based on FE Numerical Analyses

This paper presents the numerical simulation of pile installation and the subsequent increase in the pile capacity over time (or setup) after installation that was performed using the finite element software Abaqus. In the first part, pile installation and the following load tests were simulated numerically using the volumetric cavity expansion concept. The anisotropic modified Cam-Clay and Dracker–Prager models were adopted in the FE model to describe the behavior of the clayey and sandy soils, respectively. The proposed FE model proposed was successfully validated through simulating two full-scale instrumented driven pile case studies. In the second part, over 100 different actual properties of individual soil layers distracted from literature were used in the finite element analysis to conduct parametric study and to evaluate the effect of different soil properties on the pile setup behavior. The setup factor A was targeted here to describe the pile setup as a function of time after the end of driving. The selected soil properties in this study to evaluate the setup factor A include: soil plasticity index (PI), undrained shear strength (S _u ), vertical coefficient of consolidation (C _v ), sensitivity ratio (S _r ), and over-consolidation ratio (OCR). The predicted setup factor showed direct proportion with the PI and S _r and inverse relation with S _u , C _v and OCR. These soil properties were selected as independent variables, and nonlinear multivariable regression analysis was performed using Gauss–Newton algorithm to develop appropriate regression models for A. Best models were selected among all based on level of errors of prediction, which were validated with additional nineteen different site information available in the literature. The results indicated that the developed model is able to predict the setup behavior for individual cohesive soil layers, especially for values of setup factor greater than 0.10, which is the most expectable case in nature.     

Chemical Composition Based Aerosol Optical Properties According to Size Distribution and Mixture Types during Smog and Asian Dust Events in Seoul,Korea

This study investigated the optical properties of aerosols involved in different meteorological events, including smog and Asian dust days. Carbonaceous components and inorganic species were measured in Seoul, Korea between 25 and 31 March 2012. Based on the measurements, the optical properties of aerosols were calculated by considering composition, size distribution, and mixing state of aerosols. To represent polydisperse size distributions of aerosols, a lognormal size distribution with a wide range of geometric mean diameters and geometric standard deviations was used. For the optical property calculations, the Mie theory was used to compute single-scattering properties of aerosol particles with varying size and composition. Analysis of the sampled data showed that the water-soluble components of organic matter increased on smog days, whereas crustal elements increased on dust days. The water content significantly influenced the optical properties of aerosols during the smog days as a result of high relative humidity and an increase in the water-soluble component. The absorption coefficients depended on the aerosol mixture type and the aerosol size distributions. Therefore, to improve our knowledge on radiative impacts of aerosols, especially the regional impacts of aerosols in East Asia, accurate measurements of aerosols, such as size distribution, composition, and mixture type, under different meteorological conditions are required.     

An assemblage of mollusks associated with the high latitude scleractinian coral <Emphasis Type="Italic">Alveopora japonica</Emphasis> (Eguchi 1968) in Jeju Island,off the south coast of Korea

Corals reefs and communities support a wide range of flora and fauna. The complete richness and abundance of faunal communities in either coral reefs or communities is not fully understood. This is especially true for high-latitude coral communities. In this work, we carried out an analysis of an Alveopora japonica associated mollusk assemblage, in Jeju Island, Korea. A. japonica is one of the major coral species present in high abundance (88–155 colonies m^-2), with a high recruitment rate (7.8 juvenile corals m^-2 yr^-1) in Jeju Island, and may serve as a habitat for other benthic organisms. In 2012, a total number of 579 A. japonica colonies with sizes ranging between 15.1-346.7 cm² in the surface area were collected from a 1m× 10m quadrat installed at a depth of 10 m at Keumneung, on the northwest coast of Jeju Island. Numerous benthic invertebrates were found to be associated with A. japonica colonies. Twenty-seven bivalves and gastropods were identified, including a boring mytilid, Lithophaga curta, and an arcid, Barbatia stearnsi. A zonalgeographical examination of the distribution ranges of these mollusks revealed a majority of warmer water species. Our observations also showed that A. japonica may be providing a habitat to grazing gastropod, Turbo cornutus, and encrusting Spondylidae and Chamidae bivalves. A. japonica forms a coral carpet with a distinct assemblage of bivalves. It is thought that the presence of these mollusks species in the coral indicates its use as a nursery for juvenile species, a ready food supply of organic detritus, and a refuge from predators.     

Age determination and growth rate of <Emphasis Type="Italic">Mactra chinensis</Emphasis> (Bivalvia: Mactridae) by external rings and chondrophore growth bands

Age, growth and mortality of Mactra chinensis were investigated during the period from October 2012 to September 2013 in Busan, South Korea. The monthly variation of the marginal index (MI) of the shell and chondrophore showed that the ring of this species was formed once a year during July. We estimated the age of M. chinensis by reading the external rings on the shell and the growth bands of the chondrophore to compare growth parameters between the two growth characters. The age of this species ranged from 0 to 8 years (shell-based age reading) and from 0 to 10 years (chondrophore-based age reading). Based on external rings and growth bands of chondrophore for the same period, the von Bertalanffy growth functions were expressed by the equation, L _t = 101.53[1-exp {-0.15(t + 0.75)}] and L _t = 90.03[1-exp {-0.20(t + 0.50)}], respectively. The likelihood test showed that there was a significant difference in L _∞ (P < 0.001), K (P < 0.001), to (P < 0.001) estimated from non-linear regression between the two growth characters.     

<Emphasis Type="Italic">In-situ</Emphasis> measured primary productivity of ice algae in Arctic sea ice floes using a new incubation method

Recent changes in climate and environmental conditions have had great negative effects such as decreasing sea ice thickness and the extent of Arctic sea ice floes that support ice-related organisms. However, limited field observations hinder the understanding of the impacts of the current changes in the previously ice-covered regions on sea ice algae and other ice-related ecosystems. Our main objective in this study was to measure recent primary production of ice algae and their relative contribution to total primary production (ice plus pelagic primary production). In-situ primary productivity experiments with a new incubation system for ice algae were conducted in 3 sea ice cores at 2 different ice camps in the northern Chukchi Sea, 2014, using a ¹³C and ¹⁵N isotope tracer technique. A new incubation system was tested for conducting primary productivity experiments on ice algae that has several advantages over previous incubation methods, enabling stable carbon and nitrogen uptake experiments on ice algae under more natural environmental conditions. The vertical C-shaped distributions of the ice algal chl-a, with elevated concentrations at the top and bottom of the sea ice were observed in all cores, which is unusual for Arctic sea ice. The mean chl-a concentration (0.05 ± 0.03 mg chl-a m^?3) and the daily carbon uptake rates (ranging from 0.55 to 2.23 mg C m^?2 d^?1) for the ice algae were much lower in this study than in previous studies in the Arctic Ocean. This is likely because of the late sampling periods and thus the substantial melting occurring. Ice algae contributed 1.5–5.7% of the total particulate organic carbon (POC) contents of the combined euphotic water columns and sea ice floes. In comparison, ice algae contributed 4.8–8.6% to the total primary production which is greater than previously reported in the Arctic Ocean. If all of the ice-associated productions were included, the contributions of the sea ice floes to the total primary production would be greater in the Arctic Ocean and their importance would be greater in the arctic marine ecosystems.     

Implication of salt marsh foraminiferal assemblages in Suncheon Bay,South Korea

Analyses of the compositions of benthic foraminifera and sediment, observations of tidal level and salinity, and a geographic survey of the tidal salt marsh in Suncheon Bay were conducted to examine the vertical distribution of foraminifera and evaluate their potential use for sea level studies. The salt marsh is composed mainly of fine-grained silty clay sediment and its salinity is below approximately 11 psu. The tidal current flows in the southwest-tonortheast direction with an average velocity of 26.57 cm/s. A total of 33 species of foraminifera (17 agglutinated and 16 calcareoushyaline) belonging to 24 genera was identified. The species diversity (1.1 on average) was relatively low. Dominant species were Ammonia beccarii, Miliammina fusca, Haplophragmoides wilberti, and Jadammina macrescens. Calcareous foraminifera (29.5%) were dominantly represented by the Ammonia beccarii assemblage, which characterized the region between mean tide level and mean low high water (MLHW). Agglutinated species (70.5%) were represented mostly by Miliammina fusca, Miliammina fusca-Haplophragmoides wilberti, and Haplophragmoides wilberti assemblages, which characterized the MLHW–mean high water (MHW), MHW–mean highest high water (MHHW), and MHHW–Approx. highest high water tide levels, respectively. In particular, the Haplophragmoides wilberti assemblage is believed to represent the highest elevation zone of foraminifera in the salt marshes of Suncheon Bay and is considered to be a reliable indicator of sea level as a result of its narrow vertical range.     

Construction of design hyetographs for locations without observed data

A design hyetograph which represents the time distribution of design rainfall depth corresponding to a duration and a return period is essential in hydrologic design. However, for locations without observed data (ungauged sites), construction of design hyetographs is a difficult task because of the lack of data. Hence, an approach based on self‐organizing map (SOM) is proposed in this paper to construct design hyetographs at ungauged sites. SOM, which is a special kind of artificial neural networks (ANNs), is a powerful technique for extracting and visualizing salient features of data and for solving classification problems. The proposed approach is composed of three steps: classification, assignment and construction. First, the SOM‐based classification is performed to analyse gauged sites' design hyetographs. Second, based on the concept of indicator kriging, a method is developed to assign an ungauged site of interest to a certain cluster. Third, based on the spatial information, the clustering results, and the design hyetographs of gauged sites, the design hyetograph at the site of interest is constructed using the reciprocal‐distance‐squared method. An application is conducted to assess the advantages of the proposed approach over the conventional approaches. Moreover, cross‐validation tests are applied to evaluate the performance of the accuracy and the robustness of the proposed approach. The results confirm the improvement in performance by using the proposed approach instead of conventional approaches. The proposed approach is useful for constructing design hyetographs at ungauged sites. Copyright © 2009 John Wiley & Sons, Ltd.     

Estimation of mean water transit time on a steep hillslope in South Korea using soil moisture measurements and deuterium excess

A method for estimating daily mean transit time (DMTT) within a soil layer was proposed using field measurements of soil moisture. Vertical profiles of soil moisture time series were used for storage estimation. Water fluxes were evaluated through matrix and bypass flow. Variations in soil moisture and soil thickness were used to evaluate matrix flow. Exponential decay in depth of macropores was also used for bypass flow approximation. DMTT evaluation was compared to results obtained from a stable water isotope model using two years of data acquired on a steep granite hillslope in the Sulmachun watershed, South Korea. Various uncertainties in transit time evaluation such as model structure, non‐stationary assumption and data acquisition of existing approaches can be accounted for in the proposed methodology, and the flowpath contribution can be further configured in conjunction with hydrometric measurements. Probability density functions of isotope analyses were partially explained by transit time distributions that were based on soil moisture measurements. Supplementary sensitivity analyses for uncertainty configurations indicate that matrix flow is the primary process in determining transit time distribution while the impact of bypass flow is minor. The feasibility of a DMTT approach over isotope‐based methodologies highlights not only the strength of this proposed method, both in cost and time, but also its further application potential for existing soil moisture measurements. Copyright © 2013 John Wiley & Sons, Ltd.     

Multi‐species diffusion analysis in porous media under various dry density and temperature conditions: molecular dynamics simulation,homogenization analysis,and finite element method

In porous media, chemical species that dissolve in pore water can be transported via diffusion mechanisms or advective fluxes, close to or far away from where precipitation occurs. In the case of a high‐level radioactive waste disposal system, compacted bentonite is used in a buffer material in an engineering barrier system to minimize the amount of specific nuclides that breach into the surrounding host rock. To minimize breaching, it is very important to understand the transport mechanism of multiple chemical species in porous media. In the following research, we introduced FEM analysis methods using the results of the molecular dynamics simulation and homogenization analysis (MD/HA) method. First, the diffusion coefficients of ions (Cl^?, I^?, and Na⁺) in different water layers of Na‐beidellite were calculated using the MD/HA procedure under various dry density (1.2, 1.6, and 2.0 Mg/m³) and temperature (293, 323, and 363 K) conditions. Next, using FEM analysis that used the MD/HA results as input parameters, the diffusion behaviors of ions in porous media were calculated. The results indicate that the diffusion coefficients of the interlayer water in Na‐beidellite are different from the diffusion coefficients under dry density conditions. Further, the concentration profiles (C_t/C₀) of iodine and chloride are proportional to temperature but inversely proportional to dry density. Copyright © 2014 John Wiley & Sons, Ltd.