Spatial distribution features and environment effect of heavy metal in intertidal surface sediments of Guanhe estuary, Northern Jiangsu Province

In northern Jiangsu coastal zone area, Guanhe River is the biggest river and has the best navigation conditions among rivers which flow into the Yellow Sea. The grain sizes show gradual increase from the high intertidal zone to lower intertidal zone. The heavy metal values have slight changes along both sides of the river mouth, but show an evident change perpendicular to the tidal flat. In the latter case, they show a good correlation with grain size fluctuation, that is, the heavy metal values gradually decline when the grain size increases from the high intertidal zone to the lower intra-tidal zone. Analyses of the heavy metal elements show that on the Guanhe estuary surface sediment, the content of the elements Hg, As and Cu is above background values; Pb and Zn contents are rather close to the background values; and Cd content is less than the background values. The element Hg comes out to be harmful in a medium level to ecological environment, while the elements of Cr, As, Cu, Pb, Zn and Cd fall in a safe range of MPL. On the whole, Guanhe estuary tidal flat is not very harmful to the ecology in terms of the heavy metals. __________ Translated from Marine Geology & Quaternary Geology, 2007, 27(5): 23–32 [译自: 海洋地质与第四纪地质]     

贵州糯东井田水文地质条件分析

通过对井田内泉和暗河流量的调查研究,认为永宁镇组一、三段碳酸盐岩裂隙溶洞水为井田的主要含水层,含水层主要接受大气降水及河流的渗透补给;煤层上覆地层飞仙关组为相对隔水层,厚度大于500m,下覆无强含水层,其地下水对煤层的开采影响不大,井田水文地质条件较简单。采用比拟法对井田的涌水量进行了预算,推算该矿井开采设计涌水量为13 238m^3/d。     

努力提高三维地震勘探精度，为西部煤炭工业做出新贡献

以国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”项目的由来、意义和总体研究目标为引,概括的介绍了项目依托工程中各个专项技术研究完成情况,并对非均匀介质成像技术、高精度三维地震静校正技术、高密度采集技术、特观技术、岩性反演技术、属性体解释技术等六项重大关键技术取得的突破性进展进行了重点说明。指出随着我国煤炭生产重点的逐步西移,应加强诸如叠前、叠后深度偏移技术的研究,以解决复杂山区三维地震面元内地震反射波散射问题,提高其三维地震勘探精度,为西部煤炭工业做出新贡献!     

基于时空分配组合的消防设施服务范围计算方法探讨

基于时空分配组合方法,综合考虑服务时间在主干道路和街区内分配的各种情形,探讨了符合实际需求的消防站点服务范围计算方法.提出了基于多个独立指标的评价消防设施布局方案的方法,对消防规划方案进行评价.最后以武汉市武昌区为例对所提出方法进行了实验,实验结果也验证了该方法的可行性和合理性.     

三维地震技术在煤层顶板稳定性研究中的应用

龙固井田为全隐蔽的华北型煤田,位于巨野煤田中部,其首采扩大区主采煤层为3号煤层。考虑3煤层顶板稳定性主要受其顶板的构造信息和岩性信息影响,因此首先依据三维地震勘探综合解释成果及波阻抗反演解释成果对二者进行定量化,然后对波阻抗数据进行归一化处理,使得波阻抗数据和量化后的构造数据具有相同的变化范围及等量贡献。在此距离范围内构造和岩性的权值各为0．5,依此生成综合因素煤层顶板稳定性隶属度。分析3煤层顶板以上10m、20m处的综合因素煤层顶板稳定性隶属度图可以发现,该区3煤层顶板稳定性比较好。且其稳定性主要是受构造因素控制,岩性因素相对影响较小。     

江西省九岭区地质灾害危险性区划

对九岭区地质灾害发育的基本特征及其地质环境条件进行了概述,并对其形成条件进行了相关性分析;通过对地质灾害发育的基本规律、控制因素、触发因素与地质灾害关系的分析,采用环境地质学原理,建立区域地质灾害空间预测模型,圈定九岭区地质灾害的危险性分区,为实时地质灾害时间预警预报圈定有效的空间靶区。预测单元采用规则的栅格(500m×500m),共14415个单元;评价指标主要包括地形地貌、工程地质岩类、地质构造、破坏地质环境人类工程活动等四大类26个因子;利用GIS技术,提取出相关的数据信息;信息量预测方程:Ii=-1.164X1-0.999X2-0.681X3 …… 0.203X25-0.135X26(其中X1、X2、X3、…X26取1或0,即某单元中存在某种因素时取1、否则取0),据此计算出各单元格的信息量;根据地质灾害危险性分区临界指标,确定单元格的地质灾害危险性等级;合并同类项,并考虑类似的地质、自然环境具有类似的地质灾害问题的原则,进行归并与单元边界线的修改,得出九岭区地质灾害危险性分区。     

DS600和MAX6612在温度传感器中的试验应用

DS600和MAX6612是MAX(美国美信公司)新出的两款模拟温度传感器产品。这两款芯片在性能上各有其优越性,本文主要就其特征、参数、结构、功能等分别进行了研究,并结合实践情况进行了试验和应用。     

Multi-cloud model (MCM) method and its applications to the study on asymmetric spectral profiles

A method of multi-cloud model (MCM) is proposed in this paper in order to research asymmetric profiles of spectral line formed by solar discrete active objects aligned along the line-of-sight difection. Based on the MCM method, under the conditions of certain assumptions and approximations, the line-of-sight velocityV and three other physical parameter approximation values, (i.e. Doppler width _D , source functionS and optical depth at line center ₀) within different clouds may be derived simultaneously by fitting both profiles theoretical and observational. An application example of the method withm=3 shows that MCM method is suitable to measure the velocity fields of multi-object at the same time from their non-Gaussian profiles of complex. TheV and _D derived from the method are reliable,S and ₀ are approximation. An influence of the variations of initial values in the parameter on the solution is given as well.     

Calorimetric study of the coesite-stishovite transformation and calculation of the phase boundary

High temperature drop-solution calorimetry in molten 2 PbO · B₂O₃ at 1044 K for coesite and stishovite polymorphs of silica was carried out to determine the enthalpy of the coesite-stishovite transition. These experiments were performed on high-purity, single-phase samples of coesite and stishovite. Our new value for the enthalpy of the coesitestishovite transition (ΔH ₂₉₈ ⁰ ) is 29.85 ± 0.78 kJ/mol, which is about 35% lower than previously reported by Akaogi and Navrotsky (1984) and Holm et al. (1967), but which compares well with new measurements by Akaogi et al. (1994b). Using these new data, we have calculated the equilibrium phase boundary between coesite and stishovite and obtained a slope, dP/dT=0.0031 (2) GPa/K. This calculated slope is in good agreement with that determined [0.0026 (2) GPa/K] from the in-situ X-ray diffraction study of Zhang et al. (1996).     

SOMATOM AR.C型CT机复位故障检修

本文介绍了由电源故障引起的不可逆转故障,并讨论了维修和故障的排除。