Generation of random waves in time-dependent extended mild-slope equations using a source function method

We develop techniques of numerical wave generation in the time-dependent extended mild-slope equations of Suh et al. [1997. Time-dependent equations for wave propagation on rapidly varying topography. Coastal Engineering 32, 91–117] and Lee et al. [2003. Extended mild-slope equation for random waves. Coastal Engineering 48, 277–287] for random waves using a source function method. Numerical results for both regular and irregular waves in one and two horizontal dimensions show that the wave heights and the frequency spectra are properly reproduced. The waves that pass through the wave generation region do not cause any numerical disturbances, showing usefulness of the source function method in avoiding re-reflection problems at the offshore boundary.     

Effects of salinity, temperature and food type on the uptake and elimination rates of cd, cr, and zn in the asiatic clamcorbicula fluminea

Laboratory radiotracer experiments were conducted to determine assimilation efficiencies (AE) from ingested algal food and oxic sediment particles, uptake rates from the dissolved phase, and the efflux rates of Cd, Cr and Zn in the Asiatic clamCorbicula fluminea. Among three elements, AE from both algal and sediment food was greatest for Cd, followed by Zn and Cr. The AEs of tested elements from algal food(Phaeodactylum tricornutum) were consistently higher than those from sediments at a given salinity and temperature. The influence of salinity (0, 4 and 8 psu) and temperature (5, 13 and 21¼) on the metal AEs was not evident for most tested elements, except Cd AEs from sediment. The rate constant of metal uptake from the dissolved phase (k _u was greatest for Cd, followed by Zn and Cr in freshwater media. However, in saline water, thek _u of Zn were greater than those of Cd. The influx rate of all tested metals increased with temperature. The efflux rate constant was greatest for Cr (0.02 d^-1), followed by Zn (0.010~0.017 d^-1) and Cd (0.006 d^-1). The efflux rate constant for Zn in clam tissues depurated in 0 psu (0.017 d^-1) was faster than that in 8 psu (0.010 d^-1). Overall results showed that the variation of salinity and temperature in estuarine systems can considerably influence the metal bioaccumulation potential in the estuarine clamC. fluminea. The relatively high Cd accumulation capacity ofC. fluminea characterized by the high AE, high dissolved influx rate and low efflux rate, suggested that this clam species can be used as an efficient biomonitor for the Cd contamination in freshwater and estuarine environments.     

Cloning of cytochrome P450 1A (CYP1A) genes from the hermaphrodite fish Rivulus marmoratus and the Japanese medaka Oryzias latipes

To use two small fish Rivulus marmoratus (Cyprinodontiformes, Rivulidae) and the Japanese medaka Oryzias latipes (Belloniformes) as testing models in molecular ecotoxicology, we have cloned the cytochrome P450 1A (CYP1A) gene after screening of both genomic DNA libraries, and sequenced 11,863 and 7,243 bp including all the exons and introns with promoter regions, respectively. The Rivulus and the medaka CYP1A gene consisted of seven exons (including non-coding exons) with high homology to mammals. In the promoter region, Rivulus CYP1A gene has seven xenobiotic response elements (XREs) and two metal response elements (MREs), while the Japanese medaka CYP1A gene has six XREs and four MREs. Interestingly, medaka CYP1A gene has a number of MREs at the promoter, which may affect its response on metal exposure. We describe here the gene structure of both fish CYP1A genes.     

Action of Cnoidal Waves on Vertical Walls

Based on the 2nd order cnoidal wave theory, the characters of shallow water standing waves and their action on vertical walls are studied in this paper. The theoretical expressions of the wave surface elevation in front of and the wave pressure on the vertical wall are obtained. In order to verify the theoretical results, model tests were made in the State Key Laboratory of Coastal and Offshore Engineering at DUT. For the wave surface elevation in front of the wall and the wave forces on the wall at the moment when the wave surface at the wall surface goes down to the bottom of the wave trough, the calculated results coincide quite well with the experimental results. For the wave forces on the wall at the moment when the wave surface at the wall surface goes up to the top of the wave crest, the theoretical expressions are modified by the experimental results. For the convenience of practical use, calculations are made for the wave conditions which usually occur in enginering practice by use of the inves     

海洋平台沉垫的波浪载荷试验研究

本文通过对海洋平台沉垫的波浪载荷试验研究分析，着重研究了在规则波中平台沉垫总体波浪载荷和局部水动压力分布的情况，定性地考察了非线性影响、浅水影响的重要性，为今后波浪理论中粘性的引入，进而考虑粘性与波浪运动的非线性相互干扰提供实测依据     

海洋钢筋混凝土结构牺牲阳极保护系统电极行为的研究

于１９８９－１９９０年在室内条件下，用牺牲阳极保护浸泡于海水中的多种钢筋凝土试件测试不同试件中钢筋极化与阳极布局、涂层质量，涂层厚度及试件浸水情况的关系。结果表明，牺牲阳极能有效地保护全浸海水中的混凝土试件，对间断浸淋海水的试件也有一定的保护作用，通过改善阳极安装工艺，保护作用可望提高；电偶电流在各阴阳极上的分布将随涂层质量，涂层厚度和试件浸水情况不同而异，回路中电阻和电极极化情况是影响电流分布的     

Dynamics of an elastically moored floating body by the three-dimensional infinite element method

The three-dimensional problem of the dynamics of a moored floating object under the action of regular waves is solved numerically as a boundary value problem by use of the finite-infinite element method. The cross-sectional shape of the floating body and the mooring arrangements may all be arbitrary. The mathematical formulations of the problem and procedures of the numerical method are presented in this paper. A corresponding computer program WALOAD has been developed, which is capable of computing wave forces on fixed and floating structures. Numerical computations using this program could give very accurate results, even though rather coarse meshes were used. The program is easy to use and is readily applicable in many practical situations.     

The variation patterns and correlations of total phosphorus, organic phosphorus and phosphate in the Changjiang Estuary

Ｔｈｅｖａｒｉａｔｉｏｎｐａｔｔｅｒｎｓａｎｄｃｏｒｒｅｌａｔｉｏｎｓｏｆｔｏｔａｌｐｈｏｓｐｈｏｒｕｓ,ｏｒｇａｎｉｃｐｈｏｓｐｈｏｒｕｓａｎｄｐｈｏｓｐｈａｔｅｉｎｔｈｅＣｈａｎｇｊｉａｎｇＥｓｔｕａｒｙ￥ＨｕａｎｇＺｉｑｉａｎｇａｎｄＪｉＷｅｉ...     

Test Study on Current Force on Mooring Ships

In respect of an offshore berthing pillar, the test study result of current force acting on mooring ships is described in this paper. Empirical and semi-empirical relationships of current force coefficient are given according to the angle between the flow direction and the ship's longitudinal axis, which are coincident with the result of theoretical analysis.     

A Computational Model for Velocity Separation in Shallow Sea

Based on the hydrodynamical feature and the theoretical velocity profiles of tidal flow and vvind-induced flow in shal-low sea, a computational model is established for the first time, which can separate observed velocity into tidal velocity and wind-induced velocity by use of the least square method. With the model, not only the surface velocities of tidal flow and vvind-induced flow are obtained, but also the bed roughness height is determined and the wind velocity above the wa-ter surface is estimated. For verification of the model, the observed velocity in the Yellow River Estuary and the laborato-ry test is separated, then it is applied to the Yangtze River Estuary. All the results are satisfactory. The research results show that the model is simple in method, feasible in process and reasonable in result. The model is a valid approach to analysis and computation of field dala, and can be applied to separate the observed velocity in shallow sea; at the same time, reasonable boundary conditions of th