Performance of buildings with masonry infill walls during the 2011 Lorca earthquake

On Wednesday 11th May 2011 at 6:47 pm (local time) a magnitude 5.1 Mw earthquake occurred 6 km northeast of Lorca with a depth of around 5 km. As a consequence of the shallow depth and the small epicentral distance, important damage was produced in several masonry constructions and even led to the collapse of one of them. Pieces of the facades of several buildings fell down onto the sidewalk, being one of the reasons for the killing of a total of 9 people. The objective of this paper is to describe and analyze the failure patterns observed in reinforced concrete frame buildings with masonry infill walls ranging from 3 to 8 floors in height. Structural as well as non-structural masonry walls suffered important damage that led to redistributions of forces causing in some cases the failure of columns. The importance of the interaction between the structural frames and the infill panels is analyzed by means of non-linear Finite Element Models. The resulting load levels are compared with the member capacities and the changes of the mechanical properties during the seismic event are described and discussed. In the light of the results obtained the observed failure patterns are explained. Some comments are stated concerning the adequacy of the numerical models that are usually used during the design phase for the seismic analysis.     

Tectonic setting of the recent damaging seismic series in the Southeastern Betic Cordillera,Spain

In this work we analyze the tectonic setting of the recent damaging seismic series occurred in the Internal Zones of the eastern Betic Cordillera (SE Spain) and surrounding areas, the tectonic region where took place the 11th May 2011 Mw 5.2 Lorca earthquake. We revisit and make a synthesis of the seven largest and damaging seismic series occurred from 1984 to 2011. We analyze their seismotectonic setting, and their geological sources under the light of recent advances in the knowledge on active faults, neotectonics, seismotectonics and stress regime, with special attention focused on the Lorca Earthquake. These seismic series are characterized by two types of focal mechanisms, produced mainly by two sets of active faults, NNW–SSE to NNE–SSW small (no larger than 20–30 km) extensional faults with some strike slip component, and E–W to NE–SW large strike slip faults (more than 50 km long) with some compressional component (oblique slip faults). The normal fault earthquakes related to the smaller faults are dominant in the interior of large crustal tectonic blocks that are bounded by the large E–W to NE–SW strike-slip faults. The strike slip earthquakes are associated to the reactivation of segments or intersegment regions of the large E–W to NE–SW faults bounding those crustal tectonic blocks. Most of the seismic series studied in this work can be interpreted as part of the background seismicity that occurs within the crustal blocks that are strained under a transpressional regime driven by the major strike slip shear corridors bounding the blocks. The seismotectonic analysis and the phenomenology of the studied series indicate that it is usual the occurrence of damaging compound earthquakes of M  \(\sim \)  5.0 associated with triggering processes driven by coseismic stress transfer. These processes mainly occur in the seismic series generated by NNW–SSE to NNE–SSW faults. These mechanical interaction processes may induce a higher frequency of occurrence of this kind of earthquakes than considered in traditional probabilistic seismic hazard assessments and it should be taken into account in future seismic hazard assessments.     

Analysis of horizontal and vertical ring structure based on analytical model and satellite data: Application to the North Brazil Current Rings

A theoretical analysis of the principal oceanic ring parameters (tangential and angular velocities, shape function, horizontal and vertical scale of the ring) is described. The theoretical model consists of a reduced gravity model of the lens-like vortices with solid body rotation. The application of this approach is tested by comparison with data from the North Brazil Current Rings Experiment and remote sensing data. Specifically, we used the data corresponding to the surfaceintensified North Brazil Current ring (R-3) surveyed in February–March 1999, using direct velocity and hydrographical measurements. The theoretical model was used for evaluating the geometrical structure of the surface-intensified rings that produce remarkable signals in satellite data. The principal ring parameters from the model were compared with those from satellite data (altimetry and drifter information), which were estimated by using the method of minimization of the multivariable objective functions. Although the proposed model is linear in its conception, a good agreement was observed between the model and the primary characteristics of the observed rings. The model, however, allows for improvement in its assumptions, since its application is rather limited to intense ocean rings.     

Calculating Intraurban Agglomeration of Economic Units with Planar and Network K-Functions: A Comparative Analysis

Abstract

According to recent research, one of the most promising strategies for intraurban job growth lies promoting localized clusters that produce goods and services which are primarily sold within a single city, metropolitan area, or urban region. However, in order to design urban policies to create or reinforce local clusters, the first challenge is to measure in a reliable way the clustering tendencies of different kinds of economic units in intraurban space. The aim is to compare the similarities and differences in results obtained from two methods designed to measure global clustering tendencies (the planar and network K-functions) in terms of characterization, scale, and intensity of intraurban localization patterns for tertiary economic units in a Latin American metropolis. It is concluded that the network K-function is a more appropriate method for measuring agglomeration patterns, scale, and intensity at the intra-urban level.     

A neuro fuzzy approach to recognize rock magnetic and lithological patterns in a stratigraphic well from the Llanos Foreland Basin (Colombia)

The Neuro Fuzzy System (NFS) is a hybrid algorithm that combines fuzzy logic with neural networks. Since it can be used as a pattern recognition technique, we explore its potential to characterize the major lithological units encompassed by the first 512 m of the Colombian stratigraphic well Saltarin 1A (Guayabo and León Formations). Thus, we employ the NFS to infer the magnetic remanence S-ratio using bulk magnetic susceptibility (κ), κ-normalized saturation isothermal magnetization (SIRM κ) and/or volume of shale (V_sh) obtained from a gamma-ray log. The best results in terms of their corresponding Root Mean-Square Error (RMSE) values, throughout most of the upper Guayabo Formation, where magnetite seems to be an important magnetic phase, are attained with logκ and SIRM κ as input variables. Beyond 350 m downcore, the quality of the inference decreases over the León Formation, characterized by a significant presence of pyrrhotite. However, the extra input variable V_sh adjusts the inferred S-ratio to their experimental counterparts throughout this formation suggesting that the early diagenesis process that led to the formation of dispersed clay in these samples was also responsible for the formation of pyrrhotite. Hence the inclusion of manifold input data increases the ability of the net to predict S-ratio in complex geological settings with a sequence of changing lithologies, varying amounts and types of magnetic minerals, and different distributions of mineral grain sizes. In case these variables do not properly infer the actual S-ratio data, the extent of the different lithostratigraphic units would be still identifiable in some cases by the uneven quality of the correlation observed between inferred and experimental values.     

Crustal structure and tectonic setting of the south central Andes from gravimetric analysis

Based on terrestrial gravity data, in this paper we prepared a map of Bouguer anomalies, which was filtered to separate shallow and deep gravity sources. Based on a density model and gravimetric inversion techniques, the discontinuous crust-mantle boundary and the top of crystalline basement were modeled. Subsequently, the equivalent elastic thickness (Te) was evaluated, considering information from the crust-mantle discontinuity and topographic load, finding high Te values in the eastern Andean foothills and west of the Velasco range. These results are consistent with the positive isostatic and residual Bouguer anomaly values, which suggest the presence of high-density rocks in the mid-to upper crust. In addition, petrographic and geochemical analysis conducted in surface outcrops suggest a mantle origin.