Spin-forbidden resonance multiplets in light elements

We present new laboratory data on the multiplets 2s ^{2 1} S -2s2p ³ P, 2s ²2p ² P - 2s2p ^{2 4} P, and 2s ²2p ^{2 3} P - 2s2p ^{3 5} S in nitrogen, oxygen and fluorine, and discuss theZ-dependence of their wave-numbers. These multiplets are very faint in laboratory light sources, but can become prominent in astrophysical sources of low density. Our results confirm the solar identifications of the nitrogen and oxygen multiplets made by Burtonet al. Predicted positions of the corresponding multiplets in neon are given.     

Combined mine tremors source location and error evaluation in the Lubin Copper Mine (Poland)

A modified method of mine tremors location used in Lubin Copper Mine is presented in the paper. In mines where an intensive exploration is carried out a high accuracy source location technique is usually required. The effect of the flatness of the geophones array, complex geological structure of the rock mass and intense exploitation make the location results ambiguous in such mines. In the present paper an effective method of source location and location's error evaluations are presented, combining data from two different arrays of geophones. The first consists of uniaxial geophones spaced in the whole mine area. The second is installed in one of the mining panels and consists of triaxial geophones. The usage of the data obtained from triaxial geophones allows to increase the hypocenter vertical coordinate precision. The presented two-step location procedure combines standard location methods: P-waves directions and P-waves arrival times. Using computer simulations the efficiency of the created algorithm was tested. The designed algorithm is fully non-linear and was tested on the multilayered rock mass model of the Lubin Copper Mine, showing a computational better efficiency than the traditional P-wave arrival times location algorithm. In this paper we present the complete procedure that effectively solves the non-linear location problems, i.e. the mine tremor location and measurement of the error propagation.     

Defining organominerals: Comment on ‘Defining biominerals and organominerals: Direct and indirect indicators of life’ by Perry et al. (2007, Sedimentary Geology, 201, 157–179)

The paper by Perry et al. (2007, Defining biominerals and organominerals: Direct and indirect indicators of life, Sedimentary Geology, 201, 157–179) proposes to introduce “the new term ‘organomineral’” to describe mineral products whose formation is induced by by-products of biological activity, dead and decaying organisms, or nonbiological organic compounds, to be distinguished from the biomineral components of living organisms. The substantive ‘organomineral’, however, is not new: it was first introduced in 1993, with basically the same definition and distinction from biominerals, at the 7th International Symposium on Biomineralization (Défarge and Trichet, 1995, From biominerals to ‘organominerals’: The example of the modern lacustrine calcareous stromatolites from Polynesian atolls, Bulletin de l'Institut Océanographique de Monaco, n° spéc. 14, vol. 2, pp. 265–271). Thereafter, more than twenty-five papers by various authors have been devoted to organominerals and organomineral formation (‘organomineralization’) processes. Only two of these papers are cited by Perry et al., and without any reference to the definitions, or even the terms ‘organomineral’ or ‘organomineralization’, which they included. Moreover, Perry et al. tend to enlarge the original concept of organomineral to encompass all minerals containing organic matter, whether these organic compounds are active or passive in the mineralization, which introduces ambiguities detrimental to a fine understanding of present and past geobiological processes. Finally, Perry et al. propose to consider organominerals as indirect biosignatures that could be used in the search for evidence of life in the geological record and extraterrestrial bodies. This latter proposition also is problematical, in that organominerals may be formed in association with prebiotic or abiotic organic matter.     

Mafic magma batches at Vesuvius: a glass inclusion approach to the modalities of feeding stratovolcanoes

Glass inclusions in olivine and diopside phenocrysts from pyroclasts of various eruptions of Vesuvius are representative of the magmas that supplied the volcano in the last 4–5000 years. During this interval the volcano alternated between open conduit activity (e.g. 1944 and 1906 eruptions) with long pauses interupted by Plinian and sub-Plinian eruptions (e.g. 3360 B.P. Avellino, A.D. 79 Pompei, A.D. 472 Pollena). The eruptive behaviour was conditioned in all cases by the presence of shallow reservoirs: two cases are distinguished: (1) small and very shallow, 1906-type; (2) large and deeper Plinian-sub-Plinian magma chamber. Lapilli of 1906 lava fountains contain olivine (Fo_89.5–90.4) including Cr-spinel [Cr/(Cr+Al)] (Cr#>75) and volatile-K-rich tephritic glasses, which represent the first recognized Vesuvius primary magmas. Mg-poorer olivine (Fo_83–89) also occurs in 1906 and 1944 products; it formed within the shallow reservoir, together with pyroxene and leucite, between 1200 and 1130°C, from K-tephritic melts (MgO=6–8 wt%). The Plinian and sub-Plinian pumices contain diopside, phlogopite and minor olivine (Fo_85–87) representing adcumulates wrenched from the chamber walls. Glass inclusions in diopside (and some olivine) range from K-basalt to K-tephrite (MgO=6–8 wt%), with homogenization temperature of 1130–1170°C. They have been regarded as representative of the magmas supplying the Plinian-sub-Plinian chamber(s). The Avellino glass inclusions have K-basaltic compositions, contrasting with the mostly K-tephritic Pompei and Pollena inclusions. They display lower C1 and P contents with respect to the younger tephritic melts, and these variations should reflect primary features of the mantle-derived magmas. The primary and the near-primary Vesuvius magmas, as illustrated by melt inclusions, emphasize high K, P and volatile (H₂O, Cl, F, S) contents, with high K₂O/H₂O (2–2.5), Cl/F (2.5) and Cl/S (2–3) ratios, consistent with a metasomatized mantle source, and distinguishing the Vesuvius potassic primary magmas from those of the northern part of the Roman Province.     

Precipitation water storage capacity in a temperate mixed oak–beech canopy

The storage capacity of a temperate mixed oak–beech stand was investigated as a function of stand density and species composition. Measurements were performed in selected zones delimited by three neighbouring trees. Three independent approaches were compared: (i) a spraying laboratory experiment to estimate the water storage on foliage before and after dripping; (ii) a mechanistic model describing rainfall partitioning within the forest canopy and providing estimates of foliage storage capacities; and (iii) linear regression analyses to evaluate the canopy (foliage + branches) storage capacity using the relationship between throughfall and rainfall. Good agreement was generally observed between the laboratory experiment and the mechanistic model estimates, while estimations from the regression method tended to exceed those from the other approaches. Storage capacity estimates ranged from 0·22 mm to 0·80 mm for pure oak zones, from 0·24 mm to 1·12 mm for mixed zones and from 0·53 mm to 1·17 mm for pure beech zones. The increase of storage capacity with increasing proportion of beech in the canopy resulted from higher beech LAI compared with oak. Similarly, for mixed and pure beech canopies, storage capacity was higher for high density zones than for low density zones as a result of the increase in LAI with increasing local basal area; in contrast, for pure oak, the storage capacity was not related to basal area because of the lower shade‐tolerance of this species compared with beech. Copyright © 2008 John Wiley & Sons, Ltd.     

Nature and role of CO2 in some hot and cold HCO3/Na/CO2-rich Portuguese mineral waters: a review and reinterpretation

 At the northern part of the Portuguese mainland, the upflow zone of several hot and cold HCO₃/Na/CO₂-rich mineral waters is mainly associated with important NNE–SSW faults. Several geochemical studies have been carried out on thermal and non-thermal hydromineral manifestations that occur along or near these long tectonic alignments. The slight chemical differences that exist between these meteoric hot and cold HCO₃/Na/CO₂-rich mineral waters seem to be mainly caused by CO₂. δ¹³C_(TIDC) values observed in these groundwaters range between –6.00 and –1.00‰ versus V-PDB (V denotes Vienna, the site of the International Atomic Energy Agency; PDB originates from the CaCO₃ of the rostrum of a Cretaceous belemnite, Belemnitella americana, collected in the Peedee formation of South Carolina, USA) indicating a deep-seated (mantle) origin for most of the CO₂. Nevertheless, in the case of the heavier δ¹³C_(TIDC) values, the contribution of metamorphic CO₂ or the dissolution of carbonate rock levels at depth cannot be excluded. Concerning the hot waters, the lack of a positive ¹⁸O-shift should be attributed to water-rock interaction in a low temperature environment, rather than to the isotopic influence of CO₂ on the δ¹⁸O-value of the waters. Received: 9 August 1999 · Accepted: 8 March 2000     

The impact of land use change and check‐dams on catchment sediment yield

Extensive land use changes have occurred in many areas of SE Spain as a result of reforestation and the abandonment of agricultural activities. Parallel to this the Spanish Administration spends large funds on hydrological control works to reduce erosion and sediment transport. However, it remains untested how these large land use changes affect the erosion processes at the catchment scale and if the hydrological control works efficiently reduce sediment export. A combination of field work, mapping and modelling was used to test the influence of land use scenarios with and without sediment control structures (check‐dams) on sediment yield at the catchment scale. The study catchment is located in SE Spain and suffered important land use changes, increasing the forest cover 3‐fold and decreasing the agricultural land 2·5‐fold from 1956 to 1997. In addition 58 check‐dams were constructed in the catchment in the 1970s accompanying reforestation works. The erosion model WATEM‐SEDEM was applied using six land use scenarios: land use in 1956, 1981 and 1997, each with and without check‐dams. Calibration of the model provided a model efficiency of 0·84 for absolute sediment yield. Model application showed that in a scenario without check dams, the land use changes between 1956 and 1997 caused a progressive decrease in sediment yield of 54%. In a scenario without land use changes but with check‐dams, about 77% of the sediment yield was retained behind the dams. Check‐dams can be efficient sediment control measures, but with a short‐lived effect. They have important side‐effects, such as inducing channel erosion downstream. While also having side‐effects, land use changes can have important long‐term effects on sediment yield. The application of either land use changes (i.e. reforestation) or check‐dams to control sediment yield depends on the objective of the management and the specific environmental conditions of each area. Copyright © 2008 John Wiley & Sons, Ltd.     

Evolution from a freshwater to saline lake: a climatic or hydrogeological change? The case of Gallocanta Lake (northeast Spain)

Sedimentological and hydrogeological studies are combined in order to investigate the environmental conditions of the lacustrine sedimentation during the Holocene in Gallocanta Lake in Spain. Six units have been identified in the sedimentary succession, based on sedimentological facies and mineralogy, and three depositional stages have been defined: (1) alluvial, (2) carbonate lake system, (3) ephemeral carbonate–saline lake system. The transition between stages 2 and 3 implies a reduction in water inflows to the lake. The δ¹³C isotopical analysis of dolomites points to decaying organic matter as a source of carbon for the dissolved inorganic carbon and evinces that the δ¹³C variations in the lake were probably controlled by organic processes. On the other hand, δ¹⁸O values could be controlled by modifications in the hydrological system and not necessarily by climatic changes. In this sense, from the hydrological study, three aquifers can be defined: Triassic, Jurassic–Cretaceous and Cenozoic aquifers. The lack of coincidence between the surface and subterranean watershed suggests that the transition between the second and third stages is controlled by a shift of the subterranean watershed. Copyright © 2006 John Wiley & Sons, Ltd.     

Multiscale approach to geo‐composite cellular structures subjected to rock impacts

Geo‐composite cellular structures are an efficient technological solution for various applications in civil engineering. This type of structure is particularly well adapted to resisting rockfalls and can act as a defensive structure. However, the design of such structures is for the most part empirically based; this lack of research‐based design stagnates optimization and advanced development. In this paper, the mechanical behaviour of a geo‐composite cellular structure is investigated using a multi‐scale approach, from the individual cell made up of an assembly of rocky particles contained in a wire netting cage to the entire structure composed of a regular array of cells. Based on discrete modelling of both the cell and structure scales, a computational tool has been developed for design purposes. Copyright © 2007 John Wiley & Sons, Ltd.