Semisubmersible response to transient ice forces

The paper presents an analytical and experimental study on the transient response of semisubmersibles to bergybit impact and the strength of bergybit ice to high strain-rate loadings. Two approaches have been proposed for the solution of the semisubmersible-bergybit interaction problem, one using the energy approach and the other using the conventional structural dynamics approach with initial velocity conditions. In addition the local behaviour of the impacted regions have been analysed for deformation and failure. Numerical results have been given for local behaviour of an impacted column and global behaviour of semisubmersible-bergybit system. Experimental study has been reported on the impact strength of iceberg ice at strain rates of 10⁻³, 10⁻² and 10⁻¹; the indentation impact strength of ice is found to be 3–4 times the unaixial compressive strength, at the same strain rate.     

A calibration of the Bagnold beach equation

A simple sand trap is used to measure swash and backwash bedload transport rates on intertidal profiles. Data from sixty-eight beach experiments are used to calculate a mean value of 12.78 kg m^?4s^?2 for the calibration coefficient in the Bagnold beach equation.     

Tectonics of a fast spreading center: A Deep-Tow and sea beam survey on the East Pacific rise at 19°30′ S

Sea Beam and Deep-Tow were used in a tectonic investigation of the fast-spreading (151 mm yr^-1) East Pacific Rise (EPR) at 19°30 S. Detailed surveys were conducted at the EPR axis and at the Brunhes/Matuyama magnetic reversal boundary, while four long traverses (the longest 96 km) surveyed the rise flanks. Faulting accounts for the vast majority of the relief. Both inward and outward facing fault scarps appear in almost equal numbers, and they form the horsts and grabens which compose the abyssal hills. This mechanism for abyssal hill formation differs from that observed at slow and intermediate spreading rates where abyssal hills are formed by back-tilted inward facing normal faults or by volcanic bow-forms. At 19°30 S, systematic back tilting of fault blocks is not observed, and volcanic constructional relief is a short wavelength signal (less than a few hundred meters) superimposed upon the dominant faulted structure (wavelength 2–8 km). Active faulting is confined to within approximately 5–8 km of the rise axis. In terms of frequency, more faulting occurs at fast spreading rates than at slow. The half extension rate due to faulting is 4.1 mm yr^-1 at 19°30 S versus 1.6 mm yr^-1 in the FAMOUS area on the Mid-Atlantic Ridge (MAR). Both spreading and horizontal extension are asymmetric at 19°30 S, and both are greater on the east flank of the rise axis. The fault density observed at 19°30 S is not constant, and zones with very high fault density follow zones with very little faulting. Three mechanisms are proposed which might account for these observations. In the first, faults are buried episodically by massive eruptions which flow more than 5–8 km from the spreading axis, beyond the outer boundary of the active fault zone. This is the least favored mechanism as there is no evidence that lavas which flow that far off axis are sufficiently thick to bury 50–150 m high fault scarps. In the second mechanism, the rate of faulting is reduced during major episodes of volcanism due to changes in the near axis thermal structure associated with swelling of the axial magma chamber. Thus the variation in fault spacing is caused by alternate episodes of faulting and volcanism. In the third mechanism, the rate of faulting may be constant (down to a time scale of decades), but the locus of faulting shifts relative to the axis. A master fault forms near the axis and takes up most of the strain release until the fault or fault set is transported into lithosphere which is sufficiently thick so that the faults become locked. At this point, the locus of faulting shifts to the thinnest, weakest lithosphere near the axis, and the cycle repeats.     

Plate boundaries and evolution of the Solomon Sea region

The Solomon Sea Plate was widely developed during late Oligocene, separating the proto-West Melanesian Arc from the proto-Trobriand Arc. Spreading in the Bismarck Sea and in the Woodlark Basin resulted from interaction between the Pacific and Australian Plates, specifically from the collision of the proto-West Melanesian Arc with north New Guinea, which occurred after arc reversal. This model explains the extensive Miocene, Pliocene, and Quaternary volcanism of the Papua New Guinea mainland as it related to southward subduction of the Trobriand Trough. Our interpreted plate motions are concordant with the geological evidence onshore and also with complex tectonic features in the Solomon Sea Basin Region.     

Generation of small-scale turbulence in the Antarctic circumpolar current

A functional connection between probability of turbulence generation by shear instability in current velocity and Väisälä-Brunt frequency is obtained. Examples are cited of sections with isoclines of probable turbulence generation in the 30–500-m layer in the Antarctic circumpolar current north of Kergelen island.UDK [551.465.15+551.46.08] (269)     

Hurricane effects on surface gulf stream currents

A 3-dimensional model methodology for predicting the upper ocean currents under the combined influence of Gulf Stream and hurricane is described. Predicted currents are highly dependent on the turbulence closure scheme and nonlinear interactions. New field data will be required to determine the appropriate formulation for turbulent momentum transfer. However, the model points out the importance of nonlinear terms in the equations of motions for preserving the jet-like structure of the Gulf Stream and for properly accounting for interaction between the Gulf Stream and a hurricane. A potentially worst case condition is obtained for the so-called resonant hurricane.     

Contaminant concentrations and toxicity of sea-surface microlayer near Los Angeles, California

Sea-surface microlayer samples were collected from six nearshore areas receiving different amounts of anthropogenic inputs. The samples were analyzed for selected trace metals, chlorinated hydrocarbons, and polycyclic aromatic hydrocarbons. The relative toxicities of the samples were determined with fish embryo bioassays.Contaminant concentrations generally increased from offshore to the inshore stations. Contaminant concentrations were several orders of magnitude higher in microlayer samples from the highly industrialized Los Angeles and Long Beach harbors compared to samples from a site 15km offshore. Microlayer samples from the inshore stations were significantly more toxic, and induced significantly more developmental abnormalities and chromosome aberrations, than samples from the offshore stations.     

Heavy metal analyses in the marine environment - approaches to quality control

The validity of analyses of elements in the femto- and picomolar ranges in waters and sediments can be assessed on the basis of several criteria: an evaluation of the chemical technique; the use of primary standards and intercalibration exercises; and chemical and geochemical coherence of the results. Herein are reported analyses of ruthenium, platinum, palladium, rhenium, iridium and gold in oceanic samples. The gold concentrations in surface seawaters, at least 25 times less than those previously reported, are in accord with the concentrations of their periodic table neighbors as well as with crustal and sedimentary contents. The remarkable concentration of rhenium in seawater, in relation to its very low crustal abundance, can be explained by the inertness of the perrhenate ion.     

Trace metals in selected organisms from the Adriatic sea

Extensive surveys were made to establish the concentrations of several metals (Zn, Cd, Pb, Cu and Hg) in various marine organisms from different parts of the Adriatic Sea in the period from 1979 to 1985. The results obtained are based on analyses which were performed in conjunction with carefully tested procedures. Proper sampling, sample storage, treatment of samples and final analytical determination has excluded artefacts which would influence the accuracy, or cause contamination and/or trace metal losses.The metal concentrations in shellfish from the coastal areas of the Adriatic Sea are in the range of the lowest values obtained for similar organisms from other localities throughout the Mediterranean Sea. Special attention has been paid to the anthropogenic influence on trace metal concentrations in organisms living in the vicinity of domestic sewage and/or industrial waste-water outflows.     

A Lagrangian model for wind- and wave-induced near-surface currents

A theory is outlined for time-dependent currents induced near the sea surface in deep water, away from coastal boundaries, by a variable wind stress and deep-water wave field. It is based on the theory of Weber (1983) which uses a second-order perturbation expansion of the Navier-Stokes equations in Lagrangian coordinates and includes the Coriolis effect. It uses an eddy viscosity formulation for both wave dissipation and momentum transfer within the current field: the eddy viscosity ν may be allowed to vary with depth. The wind stress may be time-varying and the wave field may vary in both space and time.For the case of a constant ν, the results agree with those of Ursell (1950), Hasselmann (1970) and Pollard (1970) in the limit ν→0, and the steady-state results agree with those of Weber. For a particular case of depth-varying ν, results (obtained from numerical simulations) are in better general agreement with observations of wind-induced surface drift than when a constant ν is used.An outline is given of the application of the theory to the case of a random sea state. There are good prospects for using output data from numerical wave prediction models to drive the equations of this near-surface current model.