格罗夫山:我国新发现的一个陨石富集区

中国南极考察队在1998—2000年两次对南极洲格罗夫山地区进来了考察,共回收32块陨石,根据陨石的分布位置和岩石化学类型的差异性,初步确定格罗夫山是我国新发现的一个陨石富集区,但是该区的陨石富集模式还有待于进一步研究。     

福建省海岸基岩节理的分形性质及其与宏观断裂系的关系

该文以福建省福州市海岸基岩为例，通过野外实地勘测与室内分析相结合的研究方法，探讨了海岸基岩节理的分形性质及其与福建省宏观断裂系的相互关系。得到的基本结论为：第一，研究区节理与宏观断裂系的分形性质是客观存在的；第二，研究区节理与宏观断裂系在方向上存在着一定的响应关系；第三，研究区10^-2～10^-1m尺度的节理与福建省10^3～10^4m尺寸的断裂系存在一定的相似性。     

滇西北亚高山针叶林、硬叶栎类林的树种多样性

在滇西北香格里拉地区,以长苞冷杉(Abiesgeorgei)林、丽江云杉(Picealikiangensis)林作为亚高山针叶林的代表,以川滇高山栎(Quercusaquifolioides)林作为硬叶栎类林的代表,分别选择了6块样地,采用Shannon-Wiener多样性指数(H)、Simpson多样性指数的倒数(D')、Pielou均匀度指数(JH、JD)分别测定其树种多样性,并进行了比较研究。结果表明,三个森林类型的Shannon Wiener指数、Simpson指数的倒数、物种丰富度的顺序均为:长苞冷杉林>川滇高山栎林>丽江云杉林;而前两类森林的Pielou均匀度指数差异不大,但都高于丽江云杉林的均匀度指数值。滇西北的川滇高山栎具有很强的萌生能力。人工种植的亚高山针叶林的树种多样性较原始林低,需要较长时间的恢复过程。亚高山针叶林的存在极大地丰富了云南省的树种多样性,使云南植被的垂直地带性得到了充分体现。     

叶碲铋矿研究中存在问题分析

叶碲铋矿最初定名为wehrlite，结构式为Bi2 xTe3-x，后于1982年改名为pilsenite，结构式相应改为Bi4Te3。楚碲铋矿(BiTe)的成分介于原叶碲铋矿的成分范围之内。有些研究者仍用原成分确定叶碲铋矿或把楚碲铋矿当作叶碲铋矿，本文旨在提醒研究者注意，避免误用。     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

Evaluating foundation mass,damping and stiffness by the least‐squares method

This paper discusses how to use the three‐dimensional (3D) time‐domain finite‐element method incorporating the least‐squares method to calculate the equivalent foundation mass, damping and stiffness matrices. Numerical simulations indicate that the accuracy of these equivalent matrices is acceptable when the applied harmonic force of 1+sine is used. Moreover, the accuracy of the least‐squares method using the 1+sine force is not sensitive to the first time step for inclusion of data. Since the finite‐element method can model problems flexibly, the equivalent mass, damping and stiffness matrices of very complicated soil profiles and foundations can be established without difficulty using this least‐squares method. Copyright © 2003 John Wiley & Sons, Ltd.     

Absence of Archean basement in the South Kunlun Block: Nd-Sr-O isotopic evidence from granitoids

Abstract   The West Kunlun mountain range along the northwestern margin of the Tibetan Plateau is crucial in understanding the early tectonic history of the region. It can be divided into the North and South Kunlun Blocks, of which the former is considered to be part of the Tarim Craton, whereas consensus was not reached on the nature and origin of the South Kunlun Block. Samples were collected from the 471 Ma Yirba Pluton, the 405 Ma North Kudi Pluton and the 214 Ma Arkarz Shan Intrusive Complex. These granitoids cover approximately 60% of the Kudi area in the South Kunlun Block. Sr, Nd, and O isotope compositions preclude significant involvement of mantle-derived magma in the genesis of these granitoids; therefore, they can be used to decipher the nature of lower–mid crust in the area. All samples give Mesoproterozoic Nd model ages (1.1–1.5 Ga) similar to those of the exposed metamorphic complex of this block but significantly different from those of the basement of the North Kunlun Block (2.8 Ga). This indicates that the South Kunlun Block does not have an Archean basement, and, thus, does not support the microcontinent model that suggests the South Kunlun Block was a microcontinent once separated from and later collided back with the North Kunlun Block.     

Dinosaur tracks from the Cretaceous of South Korea: Distribution, occurrences and paleobiological significance

Abstract   Abundant dinosaur fossils including dinosaur footprints, eggs and nests, teeth and bones have been found from the Cretaceous non-marine deposits of Korea. Among them, dinosaur tracks are the most distinctive, and some track sites are among the most famous in the world. Until now, 27 dinosaur track localities have been discovered from the Cretaceous strata in the Gyeongsang Basin and several small basins. Ornithopod tracks are most abundant at most Korean track sites, and most of them are identified as Caririchnium ; that is, large ornithopod footprints with wide hoof impressions. Most theropod tracks are found in Neungju Basin and they consist of various types of small or medium-sized bird-like footprints, and other large footprints. Sauropod tracks are also abundant in the Gyeongsang Basin. The sauropod tracks vary in size, shape, and pattern of trackway, and suggest that diverse sauropods existed in this area. These diverse tracks in South Korea suggest that various dinosaurs flourished at the margins of lakes distributed in the southern part of the Korean Peninsula during the Cretaceous.     

Landslide susceptibility analysis using GIS and artificial neural network

The purpose of this study is to develop landslide susceptibility analysis techniques using an arti?cial neural network and to apply the newly developed techniques to the study area of Yongin in Korea. Landslide locations were identi?ed in the study area from interpretation of aerial photographs, ?eld survey data, and a spatial database of the topography, soil type and timber cover. The landslide‐related factors (slope, curvature, soil texture, soil drainage, soil effective thickness, timber age, and timber diameter) were extracted from the spatial database. Using those factors, landslide susceptibility was analysed by arti?cial neural network methods. The landslide susceptibility index was calculated by the back‐propagation method, which is a type of arti?cial neural network method, and the susceptibility map was made with a geographic information system (GIS) program. The results of the landslide susceptibility analysis were veri?ed using landslide location data. The validation results showed satisfactory agreement between the susceptibility map and the existing data on landslide location. A GIS was used to ef?ciently analyse the vast amount of data, and an arti?cial neural network to be an effective tool to maintain precision and accuracy. The results can be used to reduce hazards associated with landslides and to plan land use and construction. Copyright © 2003 John Wiley & Sons, Ltd.     

基于虚拟监控技术的机器人系统

介绍了一种虚拟现实技术(VR)与智能机器人监控技术协同作业的机器人系统，该系统使用虚拟现实技术建造具有良好交互性的人机界面，并且结合智能机器人监控技术，实现了虚拟监控操作。通过机器人系统，将虚拟操作结果作为一个整体对象投射到工作现场，完成了实际作业，并以水下机器人检查钻井平台水下部分的焊缝工作为背景，说明了本系统各种功能的实现过程。