Visible–near infrared spectral indices for mapping mineralogy and chemistry with OSIRIS‐REx

The primary objective of the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS‐REx) mission is to return to Earth a pristine sample of carbonaceous material from the primitive asteroid (101955) Bennu. To support compositional mapping of Bennu as part of sample site selection and characterization, we tested 95 spectral indices on visible to near infrared laboratory reflectance data from minerals and carbonaceous meteorites. Our aim was to determine which indices reliably identify spectral features of interest. Most spectral indices had high positive detection rates when applied to spectra of pure, single‐component materials. The meteorite spectra have fewer and weaker absorption features and, as a result, fewer detections with the spectral indices. Indices targeting absorptions at 0.7 and 2.7–3 μm, which are attributable to hydrated minerals, were most successful for the meteorites. Based on these results, we identified a set of 17 indices that are most likely to be useful at Bennu. These indices detect olivines, pyroxenes, carbonates, water/OH‐bearing minerals, serpentines, ferric minerals, and organics. Particle size and albedo are known to affect band depth but had a negligible impact on interpretive success with spectral indices. Preliminary analysis of the disk‐integrated Bennu spectrum with these indices is consistent with expectations given the observed absorption near 3 μm. Our study prioritizes spectral indices to be used for OSIRIS‐REx spectral analysis and mapping and informs the reliability of all index‐derived data products, including a science value map for sample site selection.     

Spatial Risk Analysis of Hydraulic Fracturing near Abandoned and Converted Oil and Gas Wells

Interaction between hydraulically generated fractures and existing wells (frac hits) could represent a potential risk to groundwater. In particular, frac hits on abandoned oil and gas wells could lead to upward leakage into overlying aquifers, provided migration pathways are present along the abandoned well. However, potential risk to groundwater is relatively unknown because few studies have investigated the probability of frac hits on abandoned wells. In this study, actual numbers of frac hits were not determined. Rather, the probability for abandoned wells to intersect hypothetical stimulated reservoir sizes of horizontal wells was investigated. Well data were compiled and analyzed for location and reservoir information, and sensitivity analyses were conducted by varying assumed sizes of stimulated reservoirs. This study used public and industry data for the Eagle Ford Shale play in south Texas, with specific attention paid to abandoned oil and gas wells converted into water wells (converted wells). In counties with Eagle Ford Shale activity, well‐data analysis identified 55,720 abandoned wells with a median age of 1983, and 2400 converted wells with a median age of 1954. The most aggressive scenario resulted in 823 abandoned wells and 184 converted wells intersecting the largest assumed stimulated reservoir size. Analysis showed abandoned wells have the potential to be intersected by multiple stimulated reservoirs, and risks for intersection would increase if currently permitted horizontal wells in the Eagle Ford Shale are actually completed. Results underscore the need to evaluate historical oil and gas activities in areas with modern unconventional oil and gas activities.     

The Red Edge Problem in asteroid band parameter analysis

Near‐infrared reflectance spectra of S‐type asteroids contain two absorptions at 1 and 2 μm (band I and II) that are diagnostic of mineralogy. A parameterization of these two bands is frequently employed to determine the mineralogy of S(IV) asteroids through the use of ordinary chondrite calibration equations that link the mineralogy to band parameters. The most widely used calibration study uses a Band II terminal wavelength point (red edge) at 2.50 μm. However, due to the limitations of the NIR detectors on prominent telescopes used in asteroid research, spectral data for asteroids are typically only reliable out to 2.45 μm. We refer to this discrepancy as “The Red Edge Problem.” In this report, we evaluate the associated errors for measured band area ratios (BAR = Area BII/BI) and calculated relative abundance measurements. We find that the Red Edge Problem is often not the dominant source of error for the observationally limited red edge set at 2.45 μm, but it frequently is for a red edge set at 2.40 μm. The error, however, is one sided and therefore systematic. As such, we provide equations to adjust measured BARs to values with a different red edge definition. We also provide new ol/(ol+px) calibration equations for red edges set at 2.40 and 2.45 μm.     

Diagnostics of solar flare hard X-ray sources

The dynamics of hard X-ray producing electron beams in solar flares can be strongly affected by the occurrence of a reverse current. The parameter diagram for a beam can be divided into three regimes, one of which is the usual thick target case, the two others being due to two different possible consequences of the reverse current. The use of this parameter diagram as a possible diagnostic tool for solar flare hard X-ray sources is discussed, together with the necessary observations and their interpretation.The forthcoming Solar Maximum Mission, complemented with concurrent ground-based efforts provide the next possibility to obtain these observations, given a good coordination of observing programs. We stress the importance of microwave (GHz) ratio observations with good temporal (few sec) and spatial resolution (1) in one dimension, and of reliable spectroscopic methods to determine the density in solar flare hard X-ray sources.     

Sediment transport by liquid surficial flow: Application to Titan

Sediment transport by surficial flow likely occurs on Titan. Titan is thought to have a volatile cycle, such as on Earth and likely in the past on Mars, which would entail surficial liquid flow. And surficial flow is implied in interpretations of Cassini-Hyugens data as showing fluvial channels, which would require sediment transport by surficial flow to form the observable features. We present calculations from basic hydraulic formulae of sediment entrainment and transport by surficial flow. First, we describe the conditions for (non-cohesive) sediment entrainment by grain size through use of the Shields' threshold curve. We then calculate settling velocities by grain size to describe the type of sediment transport—washload, suspended load, or bedload—that would follow entrainment. These calculations allow derivation of required flow depths for sediment transport by grain size over a given slope. A technique to estimate required flow velocities and unit discharges is also presented. We show the results of these calculations for organic and water ice sediment movement by liquid methane flow under Titan gravity. For comparative purposes, plots for movement of quartz sediment by water on Earth and basalt sediment by water on Mars are also included. These results indicate that (non-cohesive) material would move more easily on Titan than on Earth or Mars. Terrestrial field observations suggest that coarse grain transport is enhanced by hyperconcentration of fine-grained sediment; and the apparent availability of organic (fine grained) sediment on Titan, in conjunction with the possibility of convection-driven rainstorms, may lead to hyperconcentrated flows. Thus, significant sediment transport may occur on Titan during individual overland flow events.     

The M‐/X‐asteroid menagerie: Results of an NIR spectral survey of 45 main‐belt asteroids

Abstract– Diagnostic mineral absorption features for pyroxene(s), olivine, phyllosilicates, and hydroxides have been detected in the near‐infrared (NIR: approximately 0.75–2.50 μm) spectra for 60% of the Tholen‐classified ( Tholen 1984, 1989 ) M‐/X‐asteroids observed in this study. Nineteen asteroids (42%) exhibit weak Band I (approximately 0.9 μm) ± Band II (approximately 1.9 μm) absorptions, three asteroids (7%) exhibit a weak Band I (approximately 1.05–1.08 μm) olivine absorption, four asteroids (9%) display multiple absorptions suggesting phyllosilicate ± oxide/hydroxide minerals, one (1) asteroid exhibits an S‐asteroid type NIR spectrum, and 18 asteroids (40%) are spectrally featureless in the NIR, but have widely varying slopes. Tholen M‐asteroids are defined as asteroids exhibiting featureless visible‐wavelength (λ) spectra with moderate albedos ( Tholen 1989 ). Tholen X‐asteroids are also defined using the same spectral criterion, but without albedo information. Previous work has suggested spectral and mineralogical diversity in the M‐asteroid population ( Rivkin et al. 1995, 2000 ; Busarev 2002 ; Clark et al. 2004 ; Hardersen et al. 2005 ; Birlan et al. 2007 ; Ockert‐Bell et al. 2008, 2010 ; Shepard et al. 2008, 2010 ; Fornasier et al. 2010 ). The pyroxene‐bearing asteroids are dominated by orthopyroxene with several likely to include higher‐Ca clinopyroxene components. Potential meteorite analogs include mesosiderites, CB/CH chondrites, and silicate‐bearing NiFe meteorites. The Eos family, olivine‐bearing asteroids are most consistent with a CO chondrite analog. The aqueously altered asteroids display multiple, weak absorptions (0.85, 0.92, 0.97, 1.10, 1.40, and 2.30–2.50 μm) indicative of phyllosilicate ± hydroxide minerals. The spectrally featureless asteroids range from metal‐rich to metal‐poor with meteorite analogs including NiFe meteorites, enstatite chondrites, and stony‐iron meteorites.     

Recovering after a maritime terrorist attack: The APEC Trade Recovery Programme

Since the September 11, 2001 terrorist attacks on the World Trade Centre and the Pentagon in the United States, many measures have been taken to prevent similar attacks from happening against iconic targets from the land, air, or sea. However, most of the efforts have so far focussed only on the prevention of terrorist attacks. The APEC Trade Recovery Programme (TRP) was developed to increase the speed of post-incident recovery amongst the APEC economies and the US to facilitate a resumption of trade after a terrorist incident.     

An Agricultural Package for MODFLOW 6 Using the Application Programming Interface

An agricultural water use package has been developed for MODFLOW 6 using the MODFLOW Application Programming Interface (API). The MODFLOW API Agricultural Water Use Package (API-Ag) was based on the approach to simulate irrigation demand in the MODFLOW-NWT and GSFLOW Agricultural Water Use (AG) Package. The API-Ag Package differs from the previous approach by implementing new features and support for additional irrigation providers. New features include representation of deficit and over-irrigation, Multi-Aquifer Well and Lake Package irrigation providers, and support for structured, vertex, and unstructured grid models. Three example problems are presented that demonstrate how the API-Ag Package improves representation of highly managed systems and are further used to validate the irrigation demand and delivery formulations. Irrigation volumes simulated in the three example problems show excellent agreement with the MODFLOW-NWT AG Package.     

Estimating the redshift distribution of photometric galaxy samples – II. Applications and tests of a new method

In Lima et al. we presented a new method for estimating the redshift distribution,   N ( z )  , of a photometric galaxy sample, using photometric observables and weighted sampling from a spectroscopic subsample of the data. In this paper, we extend this method and explore various applications of it, using both simulations and real data from the Sloan Digital Sky Survey (SDSS). In addition to estimating the redshift distribution for an entire sample, the weighting method enables accurate estimates of the redshift probability distribution,   p ( z )  , for each galaxy in a photometric sample. Use of   p ( z )  in cosmological analyses can substantially reduce biases associated with traditional photometric redshifts, in which a single redshift estimate is associated with each galaxy. The weighting procedure also naturally indicates which galaxies in the photometric sample are expected to have accurate redshift estimates, namely those that lie in regions of photometric-observable space that are well sampled by the spectroscopic subsample. In addition to providing a method that has some advantages over standard photo- z estimates, the weights method can also be used in conjunction with photo- z estimates e.g. by providing improved estimation of   N ( z )  via deconvolution of   N ( z _phot)  and improved estimates of photo- z scatter and bias. We present a publicly available   p ( z )  catalogue for ∼78 million SDSS DR7 galaxies.     

Searching for nonlocal lithologies in the Apollo 12 regolith: A geochemical and petrological study of basaltic coarse fines from the Apollo lunar soil sample 12023,155

New data from a petrological and geochemical examination of 12 coarse basaltic fines from the Apollo 12 soil sample 12023,155 provide evidence of additional geochemical diversity at the landing site. In addition to the bulk chemical composition, major, minor, and trace element analyses of mineral phases are employed to ascertain how these samples relate to the Apollo 12 lithological basalt groups, thereby overcoming the problems of representativeness of small samples. All of the samples studied are low‐Ti basalts (0.9–5.7 wt% TiO₂), and many fall into the established olivine, pigeonite, and ilmenite classification of Apollo 12 basaltic suites. There are five exceptions: sample 12023,155_1A is mineralogically and compositionally distinct from other Apollo 12 basalt types, with low pigeonite REE concentrations and low Ni (41–55 ppm) and Mn (2400–2556 ppm) concentrations in olivine. Sample 12023,155_11A is also unique, with Fe‐rich mineral compositions and low bulk Mg# (=100 × atomic Mg/[Mg+Fe]) of 21.6. Sample 12023,155_7A has different plagioclase chemistry and crystallization trends as well as a wider range of olivine Mg# (34–55) compared with other Apollo 12 basalts, and shows greater similarities to Apollo 14 high‐Al basalts. Two other samples (12023,155_4A, and _5A) are similar to the Apollo 12 feldspathic basalt 12038, providing additional evidence that feldspathic basalts represent a lava flow proximal to the Apollo 12 site rather than material introduced by impacts. We suggest that at least one parent magma, and possibly as many as four separate parent magmas, are required in addition to the previously identified olivine, pigeonite, and ilmenite basaltic suites to account for the observed chemical diversity of basalts found in this study.