COMPASS: an instrument for measuring the polarization of the CMB on intermediate angular scales

COMPASS is an on-axis 2.6-m telescope coupled to a correlation polarimeter. The entire instrument was built specifically for CMB polarization studies. Careful attention was given to receiver and optics design, stability of the pointing platform, avoidance of systematic offsets, and development of data analysis techniques. Here we describe the experiment, its strengths and weaknesses, and the various things we have learned that may benefit future efforts to measure the polarization of the CMB.     

Synoptic measurements of episodic offshore flow events in the central mid-Atlantic Bight

Sub-inertial across-shelf flows over the central mid-Atlantic Bight were examined using long-range CODAR SeaSonde type HF-radar surface velocities for the period August 2002 through February 2004. Across-shelf flow in this region was found to be episodic, with offshore flow occurring six times more often than onshore flow. Several recurring spatial patterns in offshore flow are identified, and two of these patterns emerge as statistically significant using empirical orthogonal functions. The most common type of offshore flow was a shelf-wide flow with events occurring throughout the year. The most energetic and well-defined shelf-wide flow events occurred during October through April, when the water column was less stratified. Other offshore flow patterns were more localized, with a flow at the bend or ‘point’ in the New Jersey coast being most common and most energetic. The offshore flow events identified here are capable of driving significant offshore transport, with more than one-third of offshore flow episodes having potential transport distances of greater than 14 km. In addition, clusters of multiple offshore flow events are shown to be capable of transporting near-surface material across much of the continental shelf.     

Evaluation of two algorithms for a network of coastal HF radars in the Mid-Atlantic Bight

The National High Frequency (HF) Surface Current Mapping Radar Network is being developed as a backbone system within the U.S. Integrated Ocean Observing System. This paper focuses on the application of HF radar-derived surface current maps to U.S. Coast Guard Search and Rescue operations along the Mid-Atlantic coast of the USA. In that context, we evaluated two algorithms used to combine maps of radial currents into a single map of total vector currents. In situ data provided by seven drifter deployments and four bottom-mounted current meters were used to (1) evaluate the well-established unweighted least squares (UWLS) and the more recently adapted optimal interpolation (OI) algorithms and (2) quantify the sensitivity of the OI algorithm to varying decorrelation scales and error thresholds. Results with both algorithms were shown to depend on the location within the HF radar data footprint. The comparisons near the center of the HF radar coverage showed no significant difference between the two algorithms. The most significant distinction between the two was seen in the drifter trajectories. With these simulations, the weighting of radial velocities by distance in the OI implementation was very effective at reducing both the distance between the actual drifter and the cluster of simulated particles as well as the scale of the search area that encompasses them. In this study, the OI further reduced the already improved UWLS-based search areas by an additional factor of 2. The results also indicated that the OI output was relatively insensitive to the varying decorrelation scales and error thresholds tested.     

Seawater transport and reaction in upper oceanic basaltic basement: chemical data from continuous monitoring of sealed boreholes in a ridge flank environment

Osmotically pumped fluid samplers were deployed in four deep-sea boreholes that were drilled during Ocean Drilling Program (ODP) Leg 168 on the eastern flank of the Juan de Fuca Ridge. Samplers were recovered from ODP Sites 1024 and 1027 and aliquots were analyzed for a variety of dissolved ions. Results from both of the samplers show a drastic change in the major ion composition within the first 20-40 days after the borehole was sealed at the seafloor followed by a more gradual change in composition. This gradual change ceased after 820 days at Site 1024 but continued throughout the 3-year deployment at Site 1027. We modeled this change in composition to estimate the flux of formation fluid through the open borehole. The rapid early change requires a flow of ∼1500 kg of formation fluid per day. The more gradual later change requires flow rates of 38 kg/day at Site 1024 and 17.5 kg/day at Site 1027. The latter fluxes require a minimum average specific discharge of meters to hundreds of meters per year through the surrounding basaltic matrix. Trace element data show surprisingly little contamination given the presence of steel casing, Li-organic-rich grease at each joint, cement, and drilling muds. Observed changes in trace element concentrations relative to those of bottom seawater provide a measure for the global significance of cool (23°C; ODP Site 1024) ridge flank hydrothermal systems relative to warm (64°C; Baby Bare and ODP Site 1027) hydrothermal systems and illustrate the importance of these cooler systems to global geochemical budgets.     

Evidence for adiabatic decompression melting in the Southern Mariana Arc from high-Mg lavas and melt inclusions

Unusually magnesian (Mg# ∼76) basalts have been sampled from a small submarine volcano situated on the Mariana arc magmatic front. Total alkalis range from 1.7 to 1.94%, Al₂O₃ from 9.09 to 10.3% and CaO from 13.9 to 14.09%. These lavas can be classified based on mineralogy as picrite and ankaramite. Olivine-hosted melt inclusions (MIs) have median MgO contents of 17.17–17.86 wt%, 0.35–0.5% TiO₂, 42–50% SiO₂ and 1.66–3.43% total alkalis, which suggest that the parental magmas were primitive mantle melts. Trace element concentrations for both MIs and lavas are arc-like, although more depleted than most arc lavas. Chlorine (182–334 ppm) and H₂O contents (0.11–0.64 wt%) in the MIs are consistent with the estimated median oxygen fugacities (log ΔFMQ of + 1.53–1.66) which lie at the low end of the range estimates for arc basalts and picrites (ΔFMQ = + 1 to + 3). Isotopic compositions of Sr, Nd, Hf and Pb are similar to those of other Mariana arc lavas and indicate derivation from an Indian Ocean mantle domain. The averaged magmatic temperature estimate from several geothermometers was 1,367°C at 1–1.5 GPa. We propose that high-Mg magmagenesis in this region results from the adiabatic decompression melting of relatively anhydrous but metasomatized mantle wedge. This melting is attributed to enhanced upwelling related to unusual tectonics on the over-riding plate related to a tear or other discontinuity on the subducted slab.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

A 2200-yr record of hydrologic variability from Foy Lake, Montana, USA, inferred from diatom and geochemical data

A 2200-yr long, high-resolution (∼5 yr) record of drought variability in northwest Montana is inferred from diatoms and δ¹⁸O values of bio-induced carbonate preserved in a varved lacustrine core from Foy Lake. A previously developed model of the diatom response to lake-level fluctuations is used to constrain estimates of paleolake levels derived from the diatom data. High-frequency (decadal) fluctuations in the de-trended δ¹⁸O record mirror variations in wet/dry cycles inferred from Banff tree-rings, demonstrating the sensitivity of the oxygen-isotope values to changes in regional moisture balance. Low frequency (multi-centennial) isotopic changes may be associated with shifts in the seasonal distribution of precipitation. From 200 B.C. to A.D. 800, both diatom and isotope records indicate that climate was dry and lake level low, with poor diatom preservation and high organic carbon: nitrogen ratios. Subsequently, lake level rose slightly, although the climate was drier and more stable than modern conditions. At A.D. 1200, lake level increased to approximately 6 m below present elevation, after which the lake fluctuated between this elevation and full stage, with particularly cool and/or wetter conditions after 1700. The hydrologic balance of the lake shifted abruptly at 1894 because of the establishment of a lumber mill at the lake's outlet. Spectral analysis of the δ¹⁸O data indicates that severe droughts occurred with multi-decadal (50 to 70 yr) frequency.     

Lessons learned in remediation and restoration in the Oklahoma prairie: A review

For almost a decade the Tallgrass Prairie Preserve in Oklahoma has been used as a field laboratory for the investigation of aspects of the remediation and restoration of oil and brine spills. Objectives of this work have included: (1) simplification of the remediation process and lowering the cost of remediation; (2) the development of methods to accelerate or jump-start the restoration process; and (3) determining appropriate metrics for assessing the status of soil ecosystem recovery. This research has resulted in a number of lessons learned that will be presented here which can be exported to other exploration and production sites, especially sites located in sensitive ecosystems. Key observations have included the role of a fertilizer amendment in linking the remediation and restoration process at an oil-impacted site, the use of nematodes as ecological indicators in the restoration of oil- and brine-impacted sites, and the development of a two-stage process for remediation of brine impacted sites that does not include significant use of gypsum.     

北美地热井高温硬岩钻井技术

近年来,在全球能源转型的大背景下,高温地热发电得到世界各国极大的重视,前景广阔。要实现对高温地热能源的开采,采用的钻井技术是关键。北美从20世纪50年代开始,对地热能源商业化开采、并用以发电的技术进行了持续性的研究和试验。在高温硬岩地热钻井技术上形成了完整的体系,比如高温地热井设计与井筒完整性技术,高温、超高温坚硬岩石钻头设计与生产技术,高温井底动力钻具,高温井下测量工具,高温泥浆与堵漏技术,高温水泥浆体系以及高温井控技术等。本文结合作者在国内地热井钻完井及北美地热井的工作经验,概要介绍北美的地热钻井技术现状、地热钻井技术难点以及与之相关的关键技术。     

The behaviour of Li and Mg isotopes during primary phase dissolution and secondary mineral formation in basalt

This study presents lithium (Li) and magnesium (Mg) isotope data from experiments designed to assess the effects of dissolution of primary phases and the formation of secondary minerals during the weathering of basalt. Basalt glass and olivine dissolution experiments were performed in mixed through-flow reactors under controlled equilibrium conditions, at low pH (2-4) in order to keep solutions undersaturated (i.e. far-from equilibrium) and inhibit the formation of secondary minerals. Combined dissolution-precipitation experiments were performed at high pH (10 and 11) increasing the saturation state of the solutions (moving the system closer to equilibrium) and thereby promoting the formation of secondary minerals.At conditions far from equilibrium saturation state modelling and solution stoichiometry suggest that little secondary mineral formation has occurred. This is supported by the similarity of the dissolution rates of basalt glass and olivine obtained here compared to those of previous experiments. The δ⁷Li isotope composition of the experimental solution is indistinguishable from that of the initial basalt glass or olivine indicating that little fractionation has occurred. In contrast, the same experimental solutions have light Mg isotope compositions relative to the primary phases, and the solution becomes progressively lighter with time. In the absence of any evidence for secondary mineral formation the most likely explanation for these light Mg isotope compositions is that there has been preferential loss of light Mg during primary phase dissolution.For the experiments undertaken at close to equilibrium conditions the results of saturation state modelling and changes in solution chemistry suggest that secondary mineral formation has occurred. X-ray diffraction (XRD) measurements of the reacted mineral products from these experiments confirm that the principal secondary phase that has formed is chrysotile. Lithium isotope ratios of the experimental fluid become increasingly heavy with time, consistent with previous experimental work and natural data indicating that ⁶Li is preferentially incorporated into secondary minerals, leaving the solution enriched in ⁷Li. The behaviour of Mg isotopes is different from that anticipated or observed in natural systems. Similar to the far from equilibrium experiments initially light Mg is lost during olivine dissolution, but with time the δ²⁶Mg value of the solution becomes increasingly heavy. This suggests either preferential loss of light, and then heavy Mg from olivine, or that the secondary phase preferentially incorporates light Mg from solution. Assuming that the secondary phase is chrysotile, a Mg-silicate, the sense of Mg fractionation is opposite to that previously associated with silicate soils and implies that the fractionation of Mg isotopes during silicate precipitation may be mineral specific. If secondary silicates do preferentially remove light Mg from solution then this could be a possible mechanism for the relatively heavy δ²⁶Mg value of seawater. This study highlights the utility of experimental studies to quantify the effects of natural weathering reactions on the Li and Mg geochemical cycles.     

Disbond detection with piezoelectric wafer active sensors in RC structures strengthened with FRP composite overlays

The capability of embedded piezoelectric wafer active sensors (PWAS) to perform in-situ nondestructive evaluation (NDE) for structural health monitoring (SHM) of reinforced concrete (RC) structures strengthened with fiber reinforced polymer (FRP) composite overlays is explored. First, the disbond detection method were developed on coupon specimens consisting of concrete blocks covered with an FRP composite layer. It was found that the prescnce of a disbond crack drastically changes the electromecbanical (E/M) impedance spectrum measured at the PWAS terminals. The spectral changes depend on the distance between the PWAS and the crack tip. Second, large scale experiments were conducted on a RC beam strengthened with carbon fiber reinforced polymer (CFRP) composite overlay. The beam was subject to an acccleratcd fatigue load regime in a three-point bending configuration up to a total of807,415 cycles. During these fatigue tests, the CFRP overlay experienced disbonding beginning at about 500,000 cycles. The PWAS were able to detect the disbonding before it could be reliably seen by visual inspection. Good correlation between the PWAS readings and the position and extent of disbond damage was observed. These preliminary results demonstrate the potential of PWAS technology for SHM of RC structures strengthened with FRP composite ovcrlays.