Tectonic evolution of a restricted ocean basin: the Powell Basin (Northeastern Antarctic Peninsula)

Abstract

The Powell Basin is one of the few present-day examples of a small isolated ocean basin largely surrounded by blocks of continental crust. The continental blocks in this basin result from the fragmentation of the northern Antarctic Peninsula. This basin was created by the eastward motion of the South Orkney microcontinent relative to the Antarctic Peninsula. The axial rift, identified by multichannel seismic profiles obtained during the HESANT 92/93 cruise, and the gravimetric anomalies of the basin plain, together with the transcurrent faults along the northern and southern margins, indicate a predominant WSW-ENE trend of basin extension. The South Orkney microcontinent was incorporated into the Antarctic Plate during the Miocene as a consequence of the end of basin spreading. The eastern and western margins are conjugate and have an intermediate crust in the region of transition to the basin plain. The differences in the basement structure and the architecture of the depositional units suggest that the extensional process was asymmetrical. The southern transtensive margin and the northern transcurrent margin are rectilinear and steep, without any intermediate crust in the narrow fault zone between the base of the continentalblocks slope and the oceanic crust. The multichannel seismic profiles across the central sector of the basin reveal a spreading axis with a double ridge and a central depression filled with sediments. The geometry of the reflectors in this depression indicates that the ponded deposits belong to the early stages of oceaniccrust accretion. This structure is similar to the overlapping spreading centres observed in fast-spreading oceanic axes, where the spreading axis has relay and overlapping segments.

The depositional units of the margins and basin plain have been grouped into four depositional sequences, comprising the classic stages in the formation of an ocean basin: pre-rift (S1), syn-rift (S2), syn-drift (S3), and post-drift (S4). The pre-rift sequence has deformed reflectors and is observed in the southern and eastern margins. The syn-rift sequence, tectonically disrupted, fills depressions bounded by faults and is well-developed in the eastern margin where it is truncated by an erosive surface identified as the break-up unconformity. The syn-drift sequence is wedge-shaped in the basin, thickening towards the margins and having onlap relations on the flanks of the spreading ridge. The post-drift sequence is the thickest unit and is characterised by a cyclic pattern of alternating packages of high-amplitude reflectors, very continuous, and low-amplitude reflectors. Towards the western and eastern margins, the same sequence has channel-levee complexes and channelised, wedged bodies attributed to turbiditic deposits of submarine fans derived from canyons located in the slope and outer shelf. The cyclic nature of this sequence is probably related to advancing and receding grounded ice sheets in the continental shelf since the latest Miocene.     

Review: Hydraulic head measurements—new technologies, classic pitfalls

The hydraulic head is one of the most important metrics in hydrogeology as it underlies the interpretation of groundwater flow, the quantification of aquifer properties and the calibration of flow models. Heads are determined based on water-level measurements in wells and piezometers. Despite the importance of hydraulic head data, standard textbooks used in groundwater curricula provide relatively little discussion of the appropriate measurement procedures. This paper presents a review of the literature dealing with the determination of hydraulic heads, and aims to provide quantitative guidance on the likely sources of error and when these can be expected to become important. The most common measurement procedures are discussed and the main sources of error are identified, i.e. those related to (1) the measurement instruments, (2) the conversion from pressure to heads, (3) time lag effects, and (4) observation well defects. It is argued that heads should be determined following well-defined guidelines, and that it should become standard practice in hydrogeology to provide quantitative estimates of the measurement error.     

Formation of drying crack patterns in soils: a deterministic approach

Soils, as well as most of deformable multiphase porous materials, are likely to suffer from desiccation cracking, leading to the formation of regular crack patterns affecting their permeability. The ensuing crack spacing has often been related to a concept sometimes called “sequential infilling”: it is assumed that desiccation cracks are formed by successive generations. However, such a concept does not consider the pattern of a simultaneous crack formation at a given moment. Using our desiccation cracking test results and their numerical simulation, we propose a consistent explanation for the formation of desiccation crack patterns in soils. We show that the “sequential infilling” concept is suitable only when the position of the crack(s) clearly stems from the stress field. To derive an estimate of the desiccation crack spacing, the overall energy of the system needs to be considered. Statistical variability should be superimposed on the mean deterministic conditions discussed here.     

On-line fluorometry of multiple reactive and conservative tracers in streams

Performing tracer tests using artificial tracer compounds is a common practice to characterize natural streams regarding their (reactive) transport properties. Recently, the fluorescent compound resazurin was introduced as a reactive stream tracer to quantify hyporheic exchange and metabolic activity of streams. This tracer, together with its reaction product resorufin and a conservative tracer (in our case fluorescein), provides additional information about transport properties of the stream and its hyporheic zone and can therefore overcome restrictions that are commonly affiliated with the use of conservative tracers alone. However, all previously published studies using this tracer system were based on manual sampling of the water. This usually limits the number of measurements and thus the achievable temporal resolution, and potentially endangers data quality due to inadequate handling of samples. In this paper, a modified version of the GGUN-FL30 on-line fluorometer is presented in which the optics have been modified to allow measuring the concentrations of all three tracers simultaneously at intervals of 10 s. Experiments under controlled and natural conditions showed that the performance of the on-line fluorometer regarding tracer separation efficiency and practical detection limits is comparable to a high-performance laboratory spectrofluorometer. Furthermore, suggestions are given on how to correct tracer signal fluctuations caused by temporal changes in temperature and pH that might occur during a field tracer test.     

Assessing benthic health under multiple human pressures in Bohai Bay (China), using density and biomass in calculating AMBI and M‐AMBI

In recent decades, China has undergone an impressive development, which has produced increasing human pressures including coastal degradation. Bohai Bay, located in the west of the Bohai Sea (north of China), has been affected by various human pressures, including waste water discharges, land reclamation and oil exploitation. To monitor the effects of these pressures on this ecosystem, benthic macroinvertebrates and environmental variables (dissolved oxygen, nutrients, metals, etc.) were sampled in 2009 and 2011. To assess the ecological status of the benthic communities, the AZTI Marine Biotic Index (AMBI) and multivariate‐AMBI (M‐AMBI) were used, including both density and biomass in the calculation. This is the first research in which M‐AMBI based on biomass (M‐bAMBI) is applied. Both methods showed that the nearshore areas, especially close to the Haihe and Jiyun estuaries, were affected by human pressures, with a clear gradient of decreasing impacts offshore. The ecological status as assessed using density and biomass was quite similar. Significant relationships were also found between both methods and environmental variables. The use of AMBI and M‐AMBI, based upon density and biomass, in assessing the ecological status of water bodies in China seems to be promising.     

Dual-frequency ADCPs measuring turbidity

A pair of self-contained acoustic Doppler current profilers (SC-ADCPs) operating with different frequencies were moored on a muddy sea bottom at about 20 m depth in the Bay of Vilaine off the French Atlantic coast. With their acoustic beams oriented upwards, the SC-ADCPs ensonified most of the water column. The results of several months of in situ recorded echo intensity data spanning 2 years (2003 to 2004) from the dual-frequency ADCPs are presented in this paper. The aim was to estimate suspended particle mass concentration and mean size. A concentration index CI is proposed for the estimation of particle concentration. Based on theory the CI—unlike the volume backscatter strength—does not depend on particle size. Compared with in situ optical data, the CI shows reasonable precision but not increased with respect to that of the highest-frequency backscatter strength. Concerning the mean particle size, despite a lack of quantitative validation with optical particle-size measurements, the method yielded a qualitative discrimination of mineral (small) and organic (large) particles. This supports the potential of dual-frequency ADCPs to quantitatively determine particle size. A cross-calibration of the transducers of each ADCP shows that a specific component of the precision of the backscatter strength measured by ADCP depends on the acoustic frequency, the cell thickness and the ensemble integration time. Based on these results, the use of two ADCPs operating with distinctly different frequencies (two octaves apart) or a single dual-frequency ADCP is recommended.     

Numerical study on the effect of submerged depth on the horizontal plate wave energy converter

The growing search for clean and renewable energy sources has given rise to the studies of exploring sea wave energy. This paper is concerned with the numerical evaluation of the main operational principle of a submerged plate employed for the conversion of wave energy into electrical one. The numerical model used to solve the conservation equations of mass, momentum and transport of volume fraction is based on the finite volume method （FVM）. In order to tackle with the flow of mixture of air-water and its interaction with the device, the multiphase model volume of fluid （VOF） is employed. The purpose of this study is the evaluation of a numerical model for improvement of the knowledge about the submerged plate wave energy converter, as well as the investigation of the effect of the distance from the plate to the bottom of the sea （HP） on the performance of the converter. The simulations for several distances of the plate from the seabed show that the optimal efficiency is 64%, which is obtained for HP=0.53 m （88% of the depth）. This efficiency is 17% larger than that found in the worst case （HP=0.46 m, 77% of the depth）.     

Changes in European greenhouse gas and air pollutant emissions 1960–2010: decomposition of determining factors

This paper analyses factors that contributed to the evolution of SO₂, NO_x and CO₂ emissions in Europe from 1960 to 2010. Historical energy balances, along with population and economic growth data, are used to quantify the impacts of major determinants of changing emission levels, including energy intensity, conversion efficiency, fuel mix, and pollution control. Time series of emission levels are compared for countries in Western and Eastern Europe, throwing light on differences in the importance of particular emission-driving forces. Three quarters of the decline in SO₂ emissions in Western Europe resulted from a combination of reduced energy intensity and improved fuel mix, while dedicated end-of-pipe abatement measures played a dominant role in the reduction of NO_x emissions. The increase in atmospheric emissions in Eastern Europe through the mid-1990s was associated with the growth of energy-intensive industries, which off-setted the positive impact of better fuel quality and changes in fuel mix. A continuous decrease in energy intensity and higher conversion efficiencies have been the main factors responsible for the moderate rate of growth of European CO₂ emissions.     

(Near-)real-time orbit determination for GNSS radio occultation processing

The processing of GPS radio occultation measurements for use in numerical weather predictions requires a precise orbit determination (POD) of the host satellite in near-real-time. Making use of data from the GRAS instrument on Metop-A, the performance of different GPS ephemeris products and processing concepts for near-real-time and real-time POD is compared. While previous analyses have focused on the achievable along-track velocity accuracy, this study contributes a systematic comparison of the resulting estimated bending angles. This enables a more rigorous trade-off of different orbit determination methodologies in relation to the end-user needs for atmospheric science products. It is demonstrated that near-real-time GPS orbit and clock products have reached a sufficient quality to determine the Metop-A along-track velocity with an accuracy of better than 0.05 mm/s that was formerly only accessible in post-processing. The resulting bending angles are shown to exhibit standard deviation and bias differences of less than 0.3 % compared with post-processed products up to altitudes of at least 40 km, which is notably better than 1 % accuracy typically assumed for numerical weather predictions in this height regime. Complementary to the analysis of ground-based processing schemes, the potential of autonomous on-board orbit determination is investigated for the first time. Using actual GRAS flight data, it is shown that a 0.5 m 3D rms position accuracy and a 0.2 mm/s along-track velocity accuracy can in fact be obtained in real-time with the currently available GPS broadcast ephemeris quality. Bending angles derived from the simulated real-time processing exhibit a minor performance degradation above tangent point heights of 40 km but negligible differences with respect to ground-based products below this altitude. Onboard orbit determination and, if desired, bending angle computation, can thus enable a further simplification of the ground segment in future radio occultation missions and contribute to reduced product latencies for radio occultation data assimilation in numerical weather predictions.     

Measuring the impact of pollution on property prices in Madrid: objective versus subjective pollution indicators in spatial models

Much work has been done in the context of the hedonic price theory to estimate the impact of air quality on housing prices. Research has employed objective measures of air quality, but only slightly confirms the hedonic theory in the best of cases: the implicit price function relating housing prices to air pollution will, ceteris paribus, be negatively sloped. This paper compares the performance of a spatial Durbin model when using both objective and subjective measures of pollution. On the one hand, we design an Air Pollution Indicator based on measured pollution as the objective measure of pollution. On the other hand, the subjective measure of pollution employed to characterize neighborhoods is the percentage of residents who declare that the neighborhood has serious pollution problems, the percentage being referred to as residents’ perception of pollution. For comparison purposes, the empirical part of this research focuses on Madrid (Spain). The study employs a proprietary database containing information about the price and 27 characteristics of 11,796 owner-occupied single family homes. As far as the authors are aware, it is the largest database ever used to analyze the Madrid housing market. The results of the study clearly favor the use of subjective air quality measures.