New observations on high‐pressure phases in a shock melt vein in the Villalbeto de la Peña meteorite: Insights into the shock behavior of diopside

The petrology and mineralogy of shock melt veins in the L6 ordinary chondrite host of Villalbeto de la Peña, a highly shocked, L chondrite polymict breccia, have been investigated in detail using scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and electron probe microanalysis. Entrained olivine, enstatite, diopside, and plagioclase are transformed into ringwoodite, low‐Ca majorite, high‐Ca majorite, and an assemblage of jadeite‐lingunite, respectively, in several shock melt veins and pockets. We have focused on the shock behavior of diopside in a particularly large shock melt vein (10 mm long and up to 4 mm wide) in order to provide additional insights into its high‐pressure polymorphic phase transformation mechanisms. We report the first evidence of diopside undergoing shock‐induced melting, and the occurrence of natural Ca‐majorite formed by solid‐state transformation from diopside. Magnesiowüstite has also been found as veins injected into diopside in the form of nanocrystalline grains that crystallized from a melt and also occurs interstitially between majorite‐pyrope grains in the melt‐vein matrix. In addition, we have observed compositional zoning in majorite‐pyrope grains in the matrix of the shock‐melt vein, which has not been described previously in any shocked meteorite. Collectively, all these different lines of evidence are suggestive of a major shock event with high cooling rates. The minimum peak shock conditions are difficult to constrain, because of the uncertainties in applying experimentally determined high‐pressure phase equilibria to complex natural systems. However, our results suggest that conditions between 16 and 28 GPa and 2000–2200 °C were reached.     

Cartographic Design and the Space–Time Cube

This paper reports on the results of an empirical evaluation that aimed to define the effectiveness and efficiency of different visual variables in depicting the Space–Time Cube’s (STC) content. Existing STC applications demonstrate that the most used visual variables are size and colour hue. Less is known, however, about their usability metrics. The research sets design criteria for STC contents, such as space–time paths, based on the cartographic design theory. The visual variables colour hue, colour value, colour saturation, size and orientation have been applied in two different use case studies. Besides, to support the three-dimensional visual environment, depth cues such as shading and transparency were considered too. User tests have been executed based on real-world problems with particular attention for the visualization strategy and data complexity. The outcomes revealed the most efficient and effective visual variables to represent data of various complexities in the STC.     

GPS for real-time earthquake source determination and tsunami warning systems

We identify the key design aspects of a GPS-based system (and in the future, GNSS-based systems) that could contribute to real-time earthquake source determination and tsunami warning systems. Our approach is based on models of both transient and permanent displacement of GPS stations caused by large earthquakes, while considering the effect of GPS errors on inverted earthquake source parameters. Our main conclusions are that (1) the spatial pattern, magnitude, and timing of permanent displacement of GPS stations can be inverted for the earthquake source and so predict the 3D displacement field of the ocean bottom, thus providing the initial conditions for tsunami models, and (2) there are no inherently limiting factors arising from real-time orbit and positioning errors, provided sufficient near-field GPS stations are deployed. This signal could be readily exploited by GPS networks currently in place, and will be facilitated by the IGS Real-Time Project as it comes to fruition.     

Size Fractionation (Dissolved, Colloidal and Particulate) of Trace Metals in the Thur River, Switzerland

The distribution of some trace metals (Cu, Zn, Ni, Co,Fe, Mn) and of DOC over a particulate (> 1 m),a colloidal (size < 0.45 m and molecular weight > 10 kD) and an ultrafiltered fraction (< 10 kD)was determined at several sites on the Thur River,Switzerland, at various times of the year. Thecomplexation of Cu by strong ligands in theultrafiltrate and in the conventional filtrate (<0.45 m) was compared using a ligand-exchange/CSV method.The <0.45 m concentrations of Cu (from anaverage of 7 nM to 24 nM), Zn (<5–23 nM), Ni (5–13 nM),Co (1.5–3 nM) and Mn (7–92 nM)increased downstream. The major part of Cu, Zn, Niand Co usually occurred in the ultrafiltratefraction at all sites, whereas Fe and Mn were mostlyin the particulate fraction, under conditions of lowsuspended matter content (< 10 mg L^-1) in theriver. The percentage of metal in the colloidalfraction, with respect to the 0.45-m filtrate,decreased in the order: Cu (median 11%) > Zn Ni(median 5–6%) > Mn Co (median < 5%). DOCalso consisted mostly of molecules in the < 10 kDrange.Cu was strongly complexed by natural organic ligandsin all filtrate and ultrafiltrate samples. A largepart of the strong Cu binding ligands consisted ofcompounds in the < 10 kD range, but colloidalligands with similar properties also occurred. Cu wasdistributed among the dissolved and the colloidalligands, roughly in proportion to organic carbon.The colloidal fraction (as defined here) did notincrease in its proportional amount downstream and wasonly of limited significance in transporting traceelements in the Thur River under low discharge conditions.     

Molecular indicators for palaeoenvironmental change in a Messinian evaporitic sequence (Vena del Gesso, Italy). II: High-resolution variations in abundances and 13C contents of free and sulphur-bound carbon skeletons in a single marl bed

The extractable organic matter of 10 immature samples from a marl bed of one evaporitic cycle of the Vena del Gesso sediments (Gessoso-solfifera Fm., Messinian, Italy) was analyzed quantitatively for free hydrocarbons and organic sulphur compounds. Nickel boride was used as a desulphurizing agent to recover sulphur-bound lipids from the polar and asphaltene fractions. Carbon isotopic compositions (delta vs PDB) of free hydrocarbons and of S-bound hydrocarbons were also measured. Relationships between these carbon skeletons, precursor biolipids, and the organisms producing them could then be examined. Concentrations of S-bound lipids and free hydrocarbons and their delta values were plotted vs depth in the marl bed and the profiles were interpreted in terms of variations in source organisms, 13 C contents of the carbon source, and environmentally induced changes in isotopic fractionation. The overall range of delta values measured was 24.7%, from -11.6% for a component derived from green sulphur bacteria (Chlorobiaceae) to -36.3% for a lipid derived from purple sulphur bacteria (Chromatiaceae). Deconvolution of mixtures of components deriving from multiple sources (green and purple sulphur bacteria, coccolithophorids, microalgae and higher plants) was sometimes possible because both quantitative and isotopic data were available and because either the free or S-bound pool sometimes appeared to contain material from a single source. Several free n-alkanes and S-bound lipids appeared to be specific products of upper-water-column primary producers (i.e. algae and cyanobacteria). Others derived from anaerobic photoautotrophs and from heterotrophic protozoa (ciliates), which apparently fed partly on Chlorobiaceae. Four groups of n-alkanes produced by algae or cyanobacteria were also recognized based on systematic variations of abundance and isotopic composition with depth. For hydrocarbons probably derived from microalgae, isotopic variations are well correlated with those of total organic carbon. A resistant aliphatic biomacromolecule produced by microalgae is, therefore, probably an important component of the kerogen. These variations reflect changes in the depositional environment and early diagenetic transformations. Changes in the concentrations of S-bound lipids induced by variations in conditions favourable for sulphurization were discriminated from those related to variations in primary producer assemblages. The water column of the lagoonal basin was stratified and photic zone anoxia occurred during the early and middle stages of marl deposition. During the last stage of the marl deposition the stratification collapsed due to a significant shallowing of the water column. Contributions from anaerobic photoautotrophs were apparently associated with variations in depth of the chemocline.     

Estimation of seismic hazard parameters in TERESA test areas

A general overview of some of the problems involved in earthquake catalogue handling is given as part of the works carried out into the ESC/SC8-TERESA project related with the seismic hazard assessment in two selected test areas: Sannio-Matese in Italy and the northern Rhine region (BGN). Furthermore, the necessary input data to be used in the calculation of seismic hazard has been obtained, including earthquake source zones and their seismic hazard parameters.The importance is pointed out of detailed analysis of seismic catalogues, mainly in relation to the use of aftershock information, the historical records of the region, and the possible temporal and spatial variation of seismicity, which could have an important influence on short-term hazard assessment.     

Mineralogical data on a sulphosalt from the Rhodope mountains,Bulgaria

Zusammenfassung Bei dem Versuch, die Kristallstruktur von Bonchevit zu bestimmen, stellte sich heraus, daß dieses Mineral—bis dahin PbBi₄S₇—aus zwei Phasen besteht. Der Hauptanteil wurde eindeutig als Galenobismutit identifiziert. Der Rest wies nach den Gitterkonstanten (a₀=13,58±0,02 Å, b₀=20,51±0,07 Å, c₀=4,09±0,07 Å) auf ein bisher unbekanntes Mineral hin. Die Raumgruppe ist Bbmm. Ein indiziertes Pulverdiagramm und die dazugehörigen d-Werte werden angegeben.Die Emissionsspektralanalyse zeigt Pb und Bi als Hauptkomponenten, Cu und Ag als Nebenkomponenten und Spuren von Zn und Sn. Die Strukturanalyse führte zu der Formel Me₅S₆, wobei die Me-Atome etwa gleich schwer sind, so daß als chemischo Formel nur Pb₃Bi₂S₆ mit Z=4 in Frage kommt.Strukturell gehört das Mineral in die Gruppe Andorit-Ramdohrit-Fizelyit. Die Verwandtschaft bzw. Identität des Minerals mit anderen Mineralen und synthetischen Verbindungen wird diskutiert.

---

Mineralogical data on a sulphosalt from the Rhodope mountains, Bulgaria

Summary During an attempt to determine the crystal structure of bonchevite, this mineral was found to consist of two phases. Previously it was thought to have the composition PbBi₄S₇. The main constituent could unambiguously be identified as galenobismutite. For the rest the lattice constants (a₀=13.58±0,02 Å, b₀=20.51±0,07 Å, c₀=4.09±0.07 Å), indicated a new mineral. Space group is Bbmm. An indexed powder diagram (with d-values) is given.The emission spectrographic analysis shows Pb and Bi to be main components, Cu and Ag to be minor components, and traces only of Zn and Sn. The structure analysis has led to the formula Me₅S₆, with Me-atoms of approximately the same atomic number; therefore, the chemical formula has to be Pb₃Bi₂S₆, with Z=4.In a structural classification the mineral belongs to the andoriteramdohrite-fizelyite-group. The relationships to or the identity with other minerals and synthetic compounds are discussed.

     

The major‐ and trace‐element whole‐rock fingerprints of Egyptian basalts and the provenance of Egyptian artefacts

Discrimination diagrams have been developed that source Egyptian basaltic artefacts using whole‐rock major element geochemistry. These include K₂O versus SiO₂, TiO₂ and P₂O₅ against MgO/Fe₂O₃^t (total Fe as Fe₂O₃), and a discriminant analysis diagram using SiO₂, Fe₂O₃^t, CaO, and MnO. A complementary set of diagrams uses easily obtained trace element data (Nb/Y versus Zr/Nb; Zr [ppm] versus Rb/Sr; TiO₂ [wt % volatile free] versus V; and Cr [ppm] versus Zr/Y) to determine the bedrock sources. These diagrams have been applied to seven First Dynasty basalt vessels (Abydos), two Fourth Dynasty basalt paving stones (Khufu's funerary temple, Giza), and two Fifth Dynasty paving stones (Sahure's complex, Abu Sir). They show that the bedrock source for all the artefacts was the Haddadin flow in northern Egypt. Multidimensional scaling and cluster analysis applied to the whole‐rock data (major elements and trace elements together) and previously published mineral fingerprinting studies confirm these results. Comparing mineral versus whole‐rock fingerprinting techniques, a major advantage of the former is the small sample size required (0.001 g compared to ≥ 0.1 g). Analytical costs are similar for both methods assuming that a comparison (bedrock) database can be assembled from the literature. For most archaeological problems, a whole‐rock bedrock database is more likely to exist than a mineral database, and whole‐rock analyses on artefacts will generally be easier to obtain than mineral analyses. Whole‐rock fingerprinting may be more sensitive than mineral‐based fingerprinting. Thus, if sample quantity is not an issue, whole‐rock analysis may have a slight cost, convenience, and technical advantage over mineral‐based methods. Our results also emphasize that the Egyptians cherished their Haddadin basalt flow and used it extensively and exclusively for manufacturing basalt vessels and paving stones for at least 600 years (∼3150 B.C. to 2500 B.C., approximate ages of the vessels and Abu Sir paving stones, respectively). © 2001 John Wiley & Sons, Inc.     

The study of metal contamination in urban topsoils of Mexico City using GIS

This research presents and discusses information concerning the spatial distribution of heavy metals (Pb, Cu, Zn, Ba, Co, Cr, Ni and V) in the urban environments of Mexico City using geographical information system and statistical analysis. Superficial soil samples (n = 146) were analyzed. The highest contamination indices were found in the north and center zone of the metropolitan area. In contrast, the surrounding rural fields show a lower impact grade. The higher concentrations of Pb, Cu, Zn and Ba were observed as being related to high vehicular traffic, nevertheless other elements such as Co, Cr, Ni and V do not show anthropogenic influence and their content can be attributed to the parental rock. The results are compared with previous surveys carried out in 2003 in order to evaluate temporal deposition trends. No changes were found on reported concentrations except for Cu and Zn, whose concentration has increased in later years. The results suggest that spatial distribution analysis and results in comparison with previous studies could be useful for the management and sustainable development of the metropolitan area of Mexico City.     

Barium-rich fluids and melts in a subduction environment (La Corea and Sierra del Convento mélanges,eastern Cuba)

Whole-rock compositions of muscovite-bearing amphibolite, trondhjemite, pegmatite and quartz-muscovite rocks from Sierra del Convento and La Corea mélanges (eastern Cuba), as well as mineralogy, record complex circulation of Ba-rich fluids and melts in the subduction environment. Partial melting of fluid-fluxed, MORB-derived amphibolite produced trondhjemite magmas that crystallized at depth, in some cases evolving into pegmatites. Qtz-Ms rocks probably crystallized from primary fluids derived from subducted sediments. All these rocks have elevated concentrations of large-ion lithophile elements, especially Ba (up to 11,810 ppm), presumably released from slab sediments by fluids and/or melts. Fluid–rock interaction produced crystallization of phengite in parental amphibolites. The phengite crystallized in all types of rocks is rich in Ba, with concentric zoning, characterized by Ba-rich cores and Ba-poor rims, indicating a compatible behaviour of Ba in the studied systems. Zoning in phengite is governed primarily by the celadonite (tschermak) exchange vector ((Mg,Fe)Si-(Al)_-2), with more moderate contributions of the celsian (BaAl-(KSi)_-1) and paragonite (NaK_-1) exchange vectors. Late remobilization of Ba at relatively low temperature formed retrograde celsian. The compatible behaviour of Ba in the studied rocks strengthens the importance of the stability of phengite for the transfer of LIL elements from the subduction to the volcanic arc environments.