A time-dependent radiation condition for transient wave-structure interactions

An extrapolated version of a time-dependent nonreflecting boundary condition is developed for use at artificial boundaries to truncate infinite/semi-infinite domains for transient water wave problems. Test examples include single- and multiple-frequency flap wavemaker problems and free vibrations of a floating circular cylinder. The finite element results compare favorably to analytical solutions. It is shown that with the proposed boundary condition the numerical simulations have little reflections from the artificial boundaries.     

The pH measurements in seawater on the NBS scale

A new standardization method for glass electrodes is proposed for pH measurements on the NBS scale. An expression is obtained to evaluate the apparent activity coefficient of hydrogen ions as a function of salinity and temperature, from determinations obtained by Mehrbach et al., 1973 (Limnol. Oceanogr., 18: 897–907). This expression must be used to estimate systematic errors produced by variations of residual liquid-junction potential by estimating the apparent activity coefficient of hydrogen ions. In this way, values of pH obtained in oceanographical cruises can be standardized in order to determine and compare different parameters of the CO₂ system.Some experiments to study the variation of pH with temperature are carried out to compare the different series of acid constants used at present. A simple and precise polynomial equation is also obtained to determine the variation of pH with temperature.     

Dereverberation of marine reflection seismic data by a spatial combination of predictive deconvolution and velocity filtering

Contamination of seismic reflection records at early times by first-order water reverberations can be especially severe during survey operations over hard and flat sea floors on the continental shelf or in lake environments. A new dereverberation scheme based on two classical techniques — predictive deconvolution and velocity filtering — has been developed to address this problem. The techniques are combined spatially to take advantage of their complementary offset- and time-dependent properties. Stage I of the scheme consists of applying predictive deconvolution at short offset. The data are previously conditioned by a normal moveout correction with the water velocity which restores the periodicity of the reverberations in the offset-time plane and enhances the performance of deconvolution. Stage II of the scheme involves velocity filtering in the common-midpoint domain which is particularly effective at long offset where the moveout difference between primary reflections and reverberations is largest. The dereverberation scheme is well suited for the initial processing of large volumes of data due to the general availability of cost-effective deconvolution and velocity filtering algorithms in seismic processing software packages. Practical implementation issues are illustrated by a field example from the GLIMPCE survey in Lake Superior.Lithoprobe Publication No. 475.     

A new concept of a hull form to improve wave response characteristics for marine construction barges

The object of the new hull form is to provide a single hull which possesses long natural periods of roll and heave and has substantially reduced motion response amplitudes in very high sea states. Model tests and preliminary estimates indicated that the new hull form can be designed for roll and heave motions nearly equivalent to those of much larger semisubmersible units.All existing conventional marine construction barges have rectangular cross section hull. The new hull form consists of a system of upper side tanks and lower side tanks added onto a rectangular cross section hull. The upper tanks and lower tanks form longitudinal troughs on the port and starboard sides. Structural grillage of any open type is to connect the upper and lower tanks at the side of the vessel. Figure 1 indicates a profile and a typical transverse section of the new hull form. The new hull comprises the concept of reduced water plane area which is turn results in low transverse metacentric height and low tons per in. immersion. The novel features of combining low GM_T and low TPI with extremely heavy damping and added mass of the entrained water characteristics result in very long natural periods of roll and heave and considerably small rolling and heaving amplitudes in high sea states. The open side shell plating on the side of the vessel functions to dissipate wave energy at the side of the vessel which would have otherwise been transmitted to the vessel and caused the vessel to respond. This paper presents the conceptual foundation and outline of the new hull form. Model test results are presented and implemented. Also presented is the design philosophy.     

The capacity of marine plankton, macrophytes and particulate matter to adsorb Cu in the presence of Mg

A complexometric titration technique was employed to measure the total capacity of a variety of marine organisms to adsorb Cu²⁺. Measured adsorption capacities were 0.22 meq g⁻¹ for phytoplankton, 0.3–1.0 meq g⁻¹ for macrophytes, 1.0–2.5 meq g⁻¹ for zooplankton and 0.3 meq g⁻¹ for suspended particulate matter. The capacity of these materials to adsorb Cu²⁺ was reduced significantly in the presence of Mg²⁺ at seawater concentrations. Competition between Mg^t2+ and Cu²⁺ for adsorption sites at pH 6 is described by an average conditional equilibrium constant of 10^3.7. This constant is such that very little Cu²⁺ may be adsorbed onto particulates and marine phytoplankton in the presence of Mg²⁺. Further, primary productivity data and estimates of the detrital carbon sedimentation in Long Island Sound suggest that the flux of particulate carbon is insufficient to remove significant amounts of Cu from the water column to sediments by adsorption mechanisms.     

Simple determination of dimethylsulfide (DMS) and dimethylsulfoniopropionate (DMSP) using solid-phase microextraction and gas chromatography-mass spectrometry

Solid-phase microextraction (SPME) is a simple, sensitive and less destructive method for the determination of dimethylsulfide (DMS) in seawater. Combined with detection by gas chromatography-mass spectrometry (GC-MS), the method had sufficient sensitivity (minimum detectable concentration of DMS was 0.05 nM), and practical levels of reproducibility (relative standard deviation ≤7%) and linearity (r ² > 0.995) over a wide concentration range (0.5 to 910 nM). The protocol developed was applied to a Sagami Bay water sample to determine concentrations of DMS and DMSP, and in situ DMSP-lyase activity.     

Observations of polar patches generated by solar wind Alfvén wave coupling to the dayside magnetosphere

A long series of polar patches was observed by ionosondes and an all-sky imager during a disturbed period (K_p = 7- and IMF B_z <0). The ionosondes measured electron densities of up to 9 × 10¹¹ m⁻³ in the patch center, an increase above the density minimum between patches by a factor of ≈4.5. Bands of F-region irregularities generated at the equatorward edge of the patches were tracked by HF radars. The backscatter bands were swept northward and eastward across the polar cap in a fan-like formation as the afternoon convection cell expanded due to the IMF B_y > 0. Near the north magnetic pole, an all-sky imager observed the 630-nm emission patches of a distinctly band-like shape drifting northeastward to eastward. The 630-nm emission patches were associated with the density patches and backscatter bands. The patches originated in, or near, the cusp footprint where they were formed by convection bursts (flow channel events, FCEs) structuring the solar EUV-produced photoionization and the particle-produced auroral/cusp ionization by segmenting it into elongated patches. Just equatorward of the cusp footprint Pc5 field line resonances (FLRs) were observed by magnetometers, riometers and VHF/HF radars. The AC electric field associated with the FLRs resulted in a poleward-progressing zonal flow pattern and backscatter bands. The VHF radar Doppler spectra indicated the presence of steep electron density gradients which, through the gradient drift instability, can lead to the generation of the ionospheric irregularities found in patches. The FLRs and FCEs were associated with poleward-progressing DPY currents (Hall currents modulated by the IMF B_y) and riometer absorption enhancements. The temporal and spatial characteristics of the VHF backscatter and associated riometer absorptions closely resembled those of poleward moving auroral forms (PMAFs). In the solar wind, IMP 8 observed large amplitude Alfvén waves that were correlated with Pc5 pulsations observed by the ground magnetometers, riometers and radars. It is concluded that the FLRs and FCEs that produced patches were driven by solar wind Alfvén waves coupling to the dayside magnetosphere. During a period of southward IMF the dawn-dusk electric field associated with the Alfvén waves modulated the subsolar magnetic reconnection into pulses that resulted in convection flow bursts mapping to the ionospheric footprint of the cusp.     

A comparative mineralogical study of gas-related sediments of the Gulf of Cádiz

The Gulf of Cádiz area has been extensively surveyed in recent years and several gas-related fluid escape seafloor structures have been identified. In this study, gravity cores, collected during the ANASTASYA/00 and ANASTASYA/01 cruises, on mud volcanoes, hemipelagic sediments and dredged material from diapiric structures, have been studied. A comparative mineralogical analysis by XRD and SEM of samples from different areas has been performed in order to determine whether there is a characteristic mineralogy related to these fluid escape structures, and also to determine the origin of the mud matrix and constrain the depth of the parent units. The mineralogical analysis reflects the different origins of the different units described in the cores: hemipelagic material of the slope, clays that underlie the mud volcanoes and are discharged at the sea bottom surface, and authigenic and diagenetic minerals possibly involved in the anaerobic oxidation of methane in the mud volcano sediments.     

Pre- and post-drill comparison of the Mount Elbert gas hydrate prospect, Alaska North Slope

In 2006, the United States Geological Survey (USGS) completed a detailed analysis and interpretation of available 2-D and 3-D seismic data, along with seismic modeling and correlation with specially processed downhole well log data for identifying potential gas hydrate accumulations on the North Slope of Alaska. A methodology was developed for identifying sub-permafrost gas hydrate prospects within the gas hydrate stability zone in the Milne Point area. The study revealed a total of 14 gas hydrate prospects in this area.In order to validate the gas hydrate prospecting protocol of the USGS and to acquire critical reservoir data needed to develop a longer-term production testing program, a stratigraphic test well was drilled at the Mount Elbert prospect in the Milne Point area in early 2007. The drilling confirmed the presence of two prominent gas-hydrate-bearing units in the Mount Elbert prospect, and high quality well logs and core data were acquired. The post-drill results indicate pre-drill predictions of the reservoir thickness and the gas-hydrate saturations based on seismic and existing well data were 90% accurate for the upper unit (hydrate unit D) and 70% accurate for the lower unit (hydrate unit C), confirming the validity of the USGS approach to gas hydrate prospecting. The Mount Elbert prospect is the first gas hydrate accumulation on the North Slope of Alaska identified primarily on the basis of seismic attribute analysis and specially processed downhole log data. Post-drill well log data enabled a better constraint of the elastic model and the development of an improved approach to the gas hydrate prospecting using seismic attributes.