An optimized use of limited ground based topographic data for river applications

A prime requirement for hydrological applications,such as sediment budgeting or numerical modelling,is that produced Digital Terrain Models(DTMs)accurately represent the shape of landforms,especially for river reaches where data are not homogeneous.DTM error is a function of data point measurement accuracy and density and also of the field survey strategy when limited amounts of data will be acquired.This paper aims to advance the importance of the field survey strategy for the specific,but common cases,where only limited topographic data will be available.This methodology is based on the idea that any feature can be properly described by a set of cross sections and breaklines describing both main and secondary directions of the flow.Then,a longitudinal linear interpolation can be applied to the defined homogeneous zones.This morphologically oriented(MO)method that includes data acquisition strategy and interpolation,was validated using a reference DTM derived from LiDAR measurements.An estimation of the uncertainties also is suggested based on the distance of the nearest point and the local slope using a geographically weighted regression.The proposed MO method is typically applicable to Alpine river reaches characterized by multiple channels that may always be underwater and not navigable such as an alternate bar system with secondary and transverse channels.     

Characterization of the dynamic behavior of a concrete arch dam by means of forced vibration tests and numerical models

The characterization of the dynamic behavior of an arch dam, and its evolution throughout the structure's lifetime, provides important data for the safety control process. Forced vibration tests remain a reliable technique for this purpose. The Baixo Sabor dam is a 123 m high arch dam recently built in Portugal. Forced vibration tests were performed before and after the reservoir filling. Two techniques for forced vibration test are compared, discrete frequency scanning, the standard methodology, and continuous frequency scanning (sine sweep), a new proposed methodology, which allowed faster results without loss of precision. For the interpretation of test results two numerical models of the dam-reservoir-foundation system were built, and calibrated with the experimental data. A good match of numerical and experimental results was obtained for the six lowest frequencies and corresponding mode shapes.     

Reach-scale bankfull channel types can exist independently of catchment hydrology

Reach-scale morphological channel classifications are underpinned by the theory that each channel type is related to an assemblage of reach- and catchment-scale hydrologic, topographic, and sediment supply drivers. However, the relative importance of each driver on reach morphology is unclear, as is the possibility that different driver assemblages yield the same reach morphology. Reach-scale classifications have never needed to be predicated on hydrology, yet hydrology controls discharge and thus sediment transport capacity. The scientific question is: do two or more regions with quantifiable differences in hydrologic setting end up with different reach-scale channel types, or do channel types transcend hydrologic setting because hydrologic setting is not a dominant control at the reach scale? This study answered this question by isolating hydrologic metrics as potential dominant controls of channel type. Three steps were applied in a large test basin with diverse hydrologic settings (Sacramento River, California) to: (1) create a reach-scale channel classification based on local site surveys, (2) categorize sites by flood magnitude, dimensionless flood magnitude, and annual hydrologic regime type, and (3) statistically analyze two hydrogeomorphic linkages. Statistical tests assessed the spatial distribution of channel types and the dependence of channel type morphological attributes by hydrologic setting. Results yielded 10 channel types. Nearly all types existed across all hydrologic settings, which is perhaps a surprising development for hydrogeomorphology. Downstream hydraulic geometry relationships were statistically significant. In addition, cobble-dominated uniform streams showed a consistent inverse relationship between slope and dimensionless flood magnitude, an indication of dynamic equilibrium between transport capacity and sediment supply. However, most morphological attributes showed no sorting by hydrologic setting. This study suggests that median hydraulic geometry relations persist across basins and within channel types, but hydrologic influence on geomorphic variability is likely due to local influences rather than catchment-scale drivers. © 2020 John Wiley & Sons, Ltd.     

Video-monitoring of wood discharge: first inter-basin comparison and recommendations to install video cameras

Wood in rivers plays a major role both ecologically and morphologically. In recent decades, due to human activities in the river channels and along the riparian zone, wood obstruction and jamming has exacerbated flooding hazards and infrastructure damage. Therefore, it is necessary to quantify the wood flux and discharge in rivers to improve wood hazard management. Among the various methods for monitoring the wood flux in a river, the streamside videography technique is effective given its high temporal and spatial resolution. Previous work monitored the wood discharge (m³/s) using this technique in the Ain River (France) during three floods (MacVicar and Piégay, 2012), and the same method is implemented on the Isère River (France) to obtain the statistics of wood discharge for two floods. Comparison between the two sites supports the generalization of both the monitoring technique and the link between wood discharge and flood characteristics. We first show that the maximum wood discharge is observed at bankfull discharge, and we confirm the three stage model proposed by MacVicar and Piégay (2012). Additionally, transverse distributions of the number of wood pieces and corresponding wood length appear to be similar for different flood magnitudes on each site. As a technical contribution, the use of the same technique on two sites allows for recommendations on key decisions related to the location and implementation of the equipment. Both statistical and technical contributions can be used by decision makers to implement this monitoring technique, acquire the wood transport parameters, and evaluate the potential wood hazards at local scale or along a river. © 2020 John Wiley & Sons, Ltd.     

Effect of fabric on shear wave velocity in granular soils

Acta Geotechnica - The small-strain elastic shear wave velocity ($$V_S$$) is a basic mechanical property of soils and is an important parameter in geotechnical engineering. Recently, $$V_S$$ has...     

Soil hydrological response under simulated rainfall in the Dehesa land system (Extremadura,SW Spain) under drought conditions

Soil hydrology was investigated in the Guadelperalón experimental watershed in order to determine the influence of land use and vegetation cover on runoff and infiltration within the Dehesa land system. Five soil–vegetation units were selected: (1) tree cover, (2) sheep trials, (3) shrub cover, (4) hillslope grass and (5) bottom grass. The results of the simulated rainfall experiments performed at an intensity of 56·6 mm h⁻¹ during one hour on plots of 0·25 m², and the water drop penetration time test indicate the importance of water repellency in the Dehesa land system under drought conditions. Low infiltration rates (c. 9–44 mm h⁻¹) were found everywhere except at shrub sites and in areas with low grazing pressure. Soil water repellency greatly reduced infiltration, especially beneath Quercus ilex canopies, where fast ponding and greater runoff rates were observed. The low vegetation cover as a consequence of a prolonged drought and grazing pressure, in conjunction with the soil water repellency, induces high runoff rates (15–70 per cent). In spite of this, macropore fluxes were found in different locations, beneath trees, on shrub-covered surfaces, as well as at sites with a dominance of herbaceous cover. Discontinuity of the runoff fluxes due to variations in hydrophobicity causes preferential flows and as a consequence deeper infiltration, especially where macropores are developed. © 1998 John Wiley & Sons, Ltd.     

Impact of vehicles on benthic macrofauna on a subtropical sand beach

Our study aimed to identify possible relationships between the structure of the benthic macrofauna and the intense use of vehicles in Cassino Beach. Physical changes in the sediment were identified, with high compaction in the sector most affected by the vehicles, especially during the summer. The benthic macrofauna was significantly affected by vehicles, with lower densities observed in the most impacted sector, mainly in the summer, unlike the control sector, where higher densities were observed during the pre-summer and summer. We concluded that the vehicle traffic changes the physical environment of the beach and consequently affects the benthic community in the face of this disturbance. We conclude that the benthic macrofauna is highly impacted by vehicle traffic at Cassino Beach, mainly in the period with the highest traffic, and alternatives are needed for this impact, helping to recover this ecosystem.     

Spatio-temporal variability of benthic macroalgae in a coral reef system highly influenced by fluvial discharge: Veracruz,Gulf of Mexico

The Veracruz Reef System, in the southern Gulf of Mexico, is a suitable area for the study of the temporal and spatial variability of macroalgae abundance, at reef settings influenced by the fluvial discharge of the Jamapa River, and by human activities in the city and port of Veracruz. With this purpose, the bottom cover of each morpho-functional group of benthic macroalgae (frondoses, turf, and crustose corallines), and hermatypic corals, was determined at ten selected coral reefs, on a seasonal basis (rainy and dry seasons), for the 2009–2015 period. The average cover of benthic macroalgae was high (53.1%), with turf as the dominant morpho-functional group (31.9%), as in several reef ecosystems in the tropical Atlantic, followed by crustose corallines (15.2%), and frondoses (6.1%). Although turf macroalgae is dominant, due to their high temporal and spatial variability, the Veracruz Reef System could not be considered to be in a stable state, but just in an intermediate unstable equilibrium state, which is highly influenced by a high sediment load. As expected, nearshore reefs presented higher macroalgae covers, and unexpectedly, the outer-shelf reefs presented the highest cover of frondoses. Despite fluvial discharge influence, no differences in cover were found between the rainy and dry seasons. There was a negative and significantly correlation between the cover of frondoses and turf, which suggests that the driver/s of the abundance of these macroalgae, act in opposite ways for each group. Three clusters of reefs, defined by community structure and conservation degree, were determined: nearshore or degraded, offshore or moderately conserved, and conserved; and the entire Veracruz Reef System is considered to be in a moderately state of conservation.     

Geographical ecology of the symbiotic crabs Libinia ferreirae and Libinia spinosa: Distributional patterns in south and south-eastern coast of Brazil

The Brazilian coast is home to two species of Majoid crabs: Libinia ferreirae and Libinia spinosa, with similar habits, as they live in symbiosis with the jellyfish Lychnorhiza lucerna during their juvenile stage and dwell on the bottom of the ocean near the coast when adults. This study investigated the spatial and temporal distribution of L. ferreirae and L. spinosa during different ontogenic phases on the south and south-eastern coast of Brazil, between latitudes 22º and 27ºS. Our results showed that both species have different distributions during their development in the three studied regions. Libinia ferreirae were more abundant associated with jellyfish, and L. spinosa were more abundant in the free-living phase. Environmental factors, especially temperature and salinity, for associated and free-living crabs, respectively, are the main factors that need to be supported for the establishment of these specimens. We were able to identify that the presence or absence of hosts (given the ecological interactions between the species) is determinant in finding the associated crabs. Geographical variations (morphology of the regions, marine currents and the strength of the tide) are linked directly to the movement of the jellyfish hosts to the coast, influencing the abundance of L. fereirae and L. spinosa populations and affecting their distribution patterns. We can infer that both species are connected with other populations because of the association with the jellyfish, crabs could be passively transported along the south and south-eastern coast of Brazil, maintaining the connection between metapopulations.