Effects of Geometries and Substructures of ICMEs on Geomagnetic Storms

To better understand geomagnetic storm generations by ICMEs, we consider the effect of substructures (magnetic cloud, MC, and sheath) and geometries (impact location of flux-rope at the Earth) of the ICMEs. We apply the toroidal magnetic flux-rope model to 59 CDAW CME–ICME pairs to identify their substructures and geometries, and select 20 MC-associated and five sheath-associated storm events. We investigate the relationship between the storm strength indicated by minimum Dst index \((\mathrm{Dst}_{\mathrm{min}})\) and solar wind conditions related to a southward magnetic field. We find that all slopes of linear regression lines for sheath-storm events are steeper (\({\geq}\,1.4\)) than those of the MC-storm events in the relationship between \(\mathrm{Dst}_{\mathrm{min}}\) and solar wind conditions, implying that the efficiency of sheath for the process of geomagnetic storm generations is higher than that of MC. These results suggest that different general solar wind conditions (sheaths have a higher density, dynamic and thermal pressures with a higher fluctuation of the parameters and higher magnetic fields than MCs) have different impact on storm generation. Regarding the geometric encounter of ICMEs, 100% (2/2) of major storms (\(\mathrm{Dst}_{\mathrm{min}} \leq -100~\mbox{nT}\)) occur in the regions at negative \(P_{Y}\) (relative position of the Earth trajectory from the ICME axis in the \(Y\) component of the GSE coordinate) when the eastern flanks of ICMEs encounter the Earth. We find similar statistical trends in solar wind conditions, suggesting that the dependence of geomagnetic storms on 3D ICME–Earth impact geometries is caused by asymmetric distributions of the geoeffective solar wind conditions. For western flank events, 80% (4/5) of the major storms occur in positive \(P_{Y}\) regions, while intense geoeffective solar wind conditions are not located in the positive \(P_{Y}\). These results suggest that the strength of geomagnetic storms depends on ICME–Earth impact geometries as they determine the solar wind conditions at Earth.     

Lie group variational integrators for the full body problem in orbital mechanics

Equations of motion, referred to as full body models, are developed to describe the dynamics of rigid bodies acting under their mutual gravitational potential. Continuous equations of motion and discrete equations of motion are derived using Hamilton’s principle. These equations are expressed in an inertial frame and in relative coordinates. The discrete equations of motion, referred to as a Lie group variational integrator, provide a geometrically exact and numerically efficient computational method for simulating full body dynamics in orbital mechanics; they are symplectic and momentum preserving, and they exhibit good energy behavior for exponentially long time periods. They are also efficient in only requiring a single evaluation of the gravity forces and moments per time step. The Lie group variational integrator also preserves the group structure without the use of local charts, reprojection, or constraints. Computational results are given for the dynamics of two rigid dumbbell bodies acting under their mutual gravity; these computational results demonstrate the superiority of the Lie group variational integrator compared with integrators that are not symplectic or do not preserve the Lie group structure.     

Evaluation of Hydraulic Properties of Aquitards Using Earthquake‐Triggered Groundwater Variation

The hydraulic properties of aquitards are not easily obtained because monitoring wells are usually installed in aquifers for groundwater resources management. Earthquake‐induced crust stress (strain) triggers groundwater level variations over a short period of time in a large area. These groundwater anomalies can be used to investigate aquifer systems. This study uses a poroelastic model to fit the postseismic variations of groundwater level triggered by the Chi‐Chi earthquake to evaluate the hydraulic properties of aquitards in the Jhoushuei River alluvial fan (JRAF), Taiwan. Six of the adopted eight wells with depths of 70 to 130 m showed good agreement with the recovery theory. The mean hydraulic conductivities (K) of the aquifers for the eight wells are 1.62 × 10^?4 to 9.06 × 10^?4 m/s, and the thicknesses are 18.8 to 46.1 m. The thicknesses of the aquitards are 11.3 to 42.0 m. Under the isotropic assumption for K, the estimated values of K for the aquitards are 3.0 × 10^?8 to 2.1 × 10^?6 m/s, corresponding to a silty medium. The results match the values obtained for the geological material of the drilling core and those reported in previous studies. The estimated values were combined with those given in previous studies to determine the distribution of K in the first two aquitards in the JRAF. The distribution patterns of the aquitards reflect the sedimentary environments and fit the geological material. The proposed technique can be used to evaluate the K value of aquitards using inverse methods. The inversion results can be used in hydrogeological analyses, contaminant modeling, and subsidence evaluation.     

Modeling the sediment yield from landslides in the Shihmen Reservoir watershed,Taiwan

Landslides generate enormous volumes of sediment in mountainous watersheds; however, quantifying the downstream transport of landslide‐derived sediment remains a challenge. Landslide erosion and sediment delivery to the Shihmen Reservoir watershed in Taiwan was estimated using empirical landslide frequency–area and volume–area relationships, empirical landslide runout models, and the Hydrological Simulation Program‐ FORTRAN (HSPF). Landslide erosion rates ranged from 0.4 mm yr^‐1 to 2.2 mm yr^‐1 during the period 1986–2003, but increased to 7.9 mm yr^‐1 following Typhoon Aere in 2004. The percentage of landslide sediment delivered to streams decreased from 78% during the period 1986–1997 to 55% in 2004. Although the delivery ratio was lower, the volume of landslide sediment delivered to streams was 2.81 × 10⁶ Mg yr^‐1 in 1986–1997 and 8.60 × 10⁶ Mg yr^‐1 in 2004. Model simulations indicate that only a small proportion of the landslide material was delivered downstream. An average of 13% of the landslide material delivered to rivers was moved downstream during the period 1986–1997. In 2004, the period including Typhoon Aere, the annual fluvial sediment yield accounted for approximately 23% of the landslide material delivered to streams. In general, the transfer of sediment in the fluvial system in the Shihmen Reservoir watershed is dominantly transport limited. The imbalance between sediment supply and transport capacity has resulted in a considerable quantity of landslide material remaining in the upper‐stream regions of the watershed. Copyright © 2012 John Wiley & Sons, Ltd.     

Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.     

Climate change influences on pollinator,forest, and farm interactions across a climate gradient

Improved cookstoves have been identified in Mexico as a key opportunity to advance sustainable local development priorities in disadvantaged regions while mitigating climate change. This paper reviews the Patsari Cookstove Project initiated in 2003 by an NGO, Interdisciplinary Group on Appropriate Rural Technology (GIRA). The project applied an interdisciplinary and participative user-centered approach to disseminate improved cookstoves in rural Mexico, with a special focus on indigenous and poor rural communities. To date, GIRA and the Patsari Network have disseminated thousands of stoves using a “training to trainers” model. Benefits from the project include tangible improvements in users’ health, as well as savings in time and money expended on fuelwood procurement and use. The project has also documented substantive environmental benefits from significant mitigation of greenhouse gas (GHG) emissions associated with traditional open fires. To sustain scaling up efforts over the long-term, two networks have been created: The Patsari Network, which includes several organizations promoting Patsari stoves for household users, and the Tsiri Network, which supports local food security and the empowerment of indigenous women through the promotion of institutional cookstoves. Through appropriately designed and implemented local interventions, the project demonstrates that the goals of advancing sustainable local development in rural areas and climate change mitigation may not be contradictory, and may in fact reinforce one another.     

Hard x-ray and Microwave Flux Spectra of the 2 November 1991 Solar Flare

We analysed the hard X-ray and microwave flux spectra of the solar flare (BATSE No. 1791) on 2 November 1991, which started at 16:11:03 UT and ended at 16:56:10 UT. This flare is particularly interesting because of its deep cyclic intensity modulation. Data are available simultaneously from the 16-channel BATSE/LAD hard X-ray and 45-frequency OVRO microwave database. We quantitatively compare the time variations in profiles of the hard X-ray spectral photon index, the 50 keV X-ray flux, and microwave spectral indices (at both high and low frequency ends). As expected, the X-ray photon spectral index decreases as the hard X-ray flux increases. This pattern appears in all the sub-peaks. This is consistent with previous observations that hard X-ray emission hardens at the emission peak. However, the behaviour of the high-frequency microwave index is unexpected. We observe an anti-correlation between the high-frequency microwave index and the hard X-ray photon index during the course of the flare. Finally, we study the arrival time of microwave flux peaks as a function of frequency and find that the microwave peak at a higher frequency comes earlier than that at a lower frequency. A maximum delay of 72 s is found among the main peaks at different frequencies. Shorter delays are found for the other five sub-peaks.