Comparative analyses of East Texas forest cover maps generated from Landsat and AVHRR data

Comparing satellite data derived map products are affected by differences in data characteristics, image acquisition dates, processing techniques, and classification schemes used for assigning pixels to a thematic class. By comparing two forest maps generated from Landsat Enhanced Thematic Mapper Plus (ETM+) and Advanced Very High Resolution Radiometer (AVHRR) images acquired on the same day, and processed using identical classification scheme and methods these differences were minimized. The ETM+ derived map had higher classification accuracy values and more precise area estimates than the AVHRR derived map. In the ETM+ derived map, 87 of the 599 verification data were misclassified, whereas in the AVHRR derived map, 155 of the 469 verification data were misclassified. Detailed error analyses by land cover class revealed that a land use based definition of forest accounted for 74% (64 out of 87) and 57% (89 out of 155) of the classification errors in ETM+ and AVHRR derived maps, respectively.     

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.     

Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

渤海湾盆地新生界生油岩系底界面温度分布

依据渤海湾盆地2000余口测温井的地温梯度数据、地层岩性描述、分层数据以及钻井资料,计算了该盆地各生油岩系底界面的温度。统计结果表明:渤海湾盆地沙河街组大部分凹陷区地层底界面温度介于90℃至150℃,目前仍具有大量生油的温度条件,而在隆起或一些凸起地区,该地层组段温度普遍小于90℃,未能达到生油的温度指标。东营组和孔店组地层也仍具有一定的生油温度条件。研究还表明:地层温度与地层界面埋深密切相关,温度随界面埋深的增大而升高,沉积厚度大的凹陷区地层界面温度大于沉积厚度小的凸起区或斜坡地带,说明地层界面埋深是决定地温高低的主要控制因素,而地温梯度对地层界面温度的影响相对较小。     

塔里木盆地西部吐木休克断裂带的主要特征和构造演化

塔里木盆地西部的吐木休克断裂带是中央隆起(前身是晋宁期碰撞造山带)的次级单元巴楚断隆与北部坳陷的次级单元阿瓦提凹陷之间的分界。本文以大量的地质和地球物理证据,证明它是一条内部结构复杂且切穿地壳的深断裂。结合区域构造演化恢复了断裂发育史,指出它经历过三期重大的冲断活动,分别发生在加里东期、海西期和新近纪。新近纪的冲断与巴楚断隆的南界断裂带有相同的构造样式,可分为两幕:中新世的冲断受制于南天山前陆冲断带的向南扩展,更新世的冲断主要受制于西昆仑前陆冲断带的向北扩展。吐木休克断裂带的东西走向段和北西走向段的构造特征尚有若干差异,前者在加里东期活动较强,反映了构造的继承性;北西走向段则是加里东期出现的新生构造,在海西期进一步发展,更新世时因被卷入西昆仑的前陆冲断作用,表现出强烈而复杂的变形。     

塔里木西部地区古生代断裂活动的方式和机制

基于系统的地震剖面解释及其与塔中地区的对比,本文探讨了塔里木西部地区古生代断裂活动的方式和机制。玛东断裂带是一条宽阔的北东向盖层滑脱型褶皱冲断带,前展式向东南扩展,冲断作用发生在奥陶纪末。巴东断裂(吐土休克Ⅱ号断裂)为北西向基底卷入型冲断带,奥陶纪末和中二叠世末发生冲断。巴西断裂和塔参2井南断裂是海西期的正断层。塔里木古板块古生代的发育受邻侧的造山带演化制约,近东西向和北东向断裂奥陶纪末的冲断是继承基底构造发育的。塔中地区的近北西向断裂是晚寒武世的新生断裂,加里东运动可分为两幕:奥陶纪末的冲断(艾比湖运动)和晚志留-中泥盆世的冲断-走滑,后者向西明显减弱。塔里木西部的部分北西向断裂(如康西断裂)可归入塔中北西向断裂系。北东向的玛东断裂带是其西的向北(东)冲断的吐木休克断裂带与其东的向南偏东冲断的塔中8-1井——塔中5井断裂带之间的调节断层。     

新疆库车新生代前陆褶皱冲断带的变形特征、时代和机制

库车前陆褶皱冲断带自北向南可分为基底冲断带、箱状背斜带、梳状背斜带和挠曲褶皱带,东西方向上可分为西段、中段和东段。本文分段叙述了各变形带的变形特征,指出东段箱状背斜带不发育,秋里塔格山脉(构造带)东延未进入东段,因而总体看自西向东变形强度减弱,地形上趋于夷平。该冲断带的形成经历了两次重大的冲断活动,分别发生在中新世和早(-中)更新世;相应地,该带可分为南、北两个"盆""山"亚系统,两者在地层记录、变形期次和变形机制上尚有若干差异。库车前陆褶皱冲断带的发育,除了受南天山的冲断和向南扩展引起的近南北向挤压应力场控制外,还受到基底断裂在新生代的活化和膏盐层底辟的制约,前者以近北西向的构造变换带及其共轭发育的近北东向断层最为重要,后者既控制了秋里塔格山脉的形成(主要受垂直的挤压应力场作用),也在库车前陆褶皱冲断带东西方向的变形分段中起了重要作用。文章还讨论了变形与地貌发育的关系和在油气勘探中的指导意义。     

松辽盆地尚家—太平川地区石油地质条件及勘探方向分析

通过对尚家—太平川地区构造演化、烃源岩特征、沉积特征、储盖组合、油水关系及油藏类型和油气成藏特征的分析,研究了本区的石油地质条件,认为烃源岩具有较好的生、排烃能力,分流河道砂体为油气聚集提供较好的沉积环境,良好的储盖组合有利于油气的聚集与保存。研究区没有统一油水界面,尚家地区以岩性—构造油藏为主,太平川地区以构造—岩性油藏为主。区内扶余—杨大城子油层油气成藏受有效性圈闭、优势运移通道、过剩压力、储集条件和构造诱导作用控制。据上述认识确定了研究区下一步的勘探方向,并已在指导勘探实践中取得了较好的效果。     

Flexural isostatic response of the Alps to increased Quaternary erosion recorded by foreland basin remnants,SE France

We test the hypothesis that flexural isostatic compensation of the mass removed by enhanced Quaternary erosion is responsible for uplift of the Western European Alps and their forelands. We use two well‐preserved and well‐dated (1.8 Ma) abandonment surfaces of foreland basin remnants in SE France (the Chambaran and Valensole plateaux) as passive benchmarks for tilting of the foreland. Estimating their initial slope from morphometric scaling relationships, we determine bulk post‐depositional tilting of 0.5–0.8% for these surfaces. The calculated isostatic response of the Alpine lithosphere to erosional unloading, using the method recently proposed by Champagnac et al. [Geology 35 (2007) 195–198] , yields a predicted tilting of 0.3–0.4% in the considered areas, explaining approximately half of the determined post‐depositional tilting. Such long‐term deformation being insensitive to cyclic loading/unloading because of glaciations, we suspect the other half to be related to as yet undetermined long‐wavelength and long‐lived tectonic process(es).