Rates of stream incision in the middle part of the Arkansas River basin based on late Tertiary to mid-Pleistocene volcanic ash

Ages and elevations of ash layers correlated with late Tertiary and Pleistocene eruptions in the western US and present stream elevations are used to calculate net rates of incision by streams in the middle reaches of the Arkansas River basin in the south central US. The mean of the 23 measurements of rate of stream incision in the study area is 4.2±2.7 cm/ky with a range of 0.6 to 9.7 cm/ky. Major influences on rate of stream incision in the study area include the arid to semi-arid climate of the region, the type of material being incised by streams, stream captures, and salt dissolution in the bedrock that underlies the region. Rates of incision exceeded rates of basin filling but significant deposits of unconsolidated late Cenozoic sediments occur in the study area. Basins of streams that have incised the slowest since the late Tertiary contain the thickest and most extensive amounts of unconsolidated Quaternary sediments. Rates of incision by streams in the study area are similar to or slower than rates reported for streams elsewhere in the US and the world. Streams in mountainous regions and areas affected by rapid uplift have incised at rates orders of magnitude faster than streams in the study area.     

The Homestead kimberlite, central Montana, USA: mineralogy, xenocrysts, and upper-mantle xenoliths

The Homestead kimberlite was emplaced in lower Cretaceous marine shale and siltstone in the Grassrange area of central Montana. The Grassrange area includes aillikite, alnoite, carbonatite, kimberlite, and monchiquite and is situated within the Archean Wyoming craton. The kimberlite contains 25–30 modal% olivine as xenocrysts and phenocrysts in a matrix of phlogopite, monticellite, diopside, serpentine, chlorite, hydrous Ca–Al–Na silicates, perovskite, and spinel. The rock is kimberlite based on mineralogy, the presence of atoll-textured groundmass spinels, and kimberlitic core-rim zoning of groundmass spinels and groundmass phlogopites.

Garnet xenocrysts are mainly Cr-pyropes, of which 2–12% are G10 compositions, crustal almandines are rare and eclogitic garnets are absent. Spinel xenocrysts have MgO and Cr₂O₃ contents ranging into the diamond inclusion field. Mg-ilmenite xenocrysts contain 7–11 wt.% MgO and 0.8–1.9 wt.% Cr₂O₃, with (Fe⁺³/Fe^tot) from 0.17–0.31. Olivine is the only obvious megacryst mineral present. One microdiamond was recovered from caustic fusion of a 45-kg sample.

Upper-mantle xenoliths up to 70 cm size are abundant and are some of the largest known garnet peridotite xenoliths in North America. The xenolith suite is dominated by dunites, and harzburgites containing garnet and/or spinel. Granulites are rare and eclogites are absent. Among 153 xenoliths, 7% are lherzolites, 61% are harzburgites, 31% are dunites, and 1% are orthopyroxenites. Three of 30 peridotite xenoliths that were analysed are low-Ca garnet–spinel harzburgites containing G10 garnets. Xenolith textures are mainly coarse granular, and only 5% are porphyroclastic.

Xenolith modal mineralogy and mineral compositions indicate ancient major-element depletion as observed in other Wyoming craton xenolith assemblages, followed by younger enrichment events evidenced by tectonized or undeformed veins of orthopyroxenite, clinopyroxenite, websterite, and the presence of phlogopite-bearing veins and disseminated phlogopite. Phlogopite-bearing veins may represent kimberlite-related addition and/or earlier K-metasomatism.

Xenolith thermobarometry using published two-pyroxene and Al-in-opx methods suggest that garnet–spinel peridotites are derived from 1180 to 1390 °C and 3.6 to 4.7 GPa, close to the diamond–graphite boundary and above a 38 mW/m² shield geotherm. Low-Ca garnet–spinel harzburgites with G10 garnets fall in about the same T and P range. Most spinel peridotites with assumed 2.0 GPa pressure are in the same T range, possibly indicating heating of the shallow mantle. Four of 79 Cr diopside xenocrysts have P–T estimates in the diamond stability field using published single-pyroxene P–T calculation methods.     

A semi-analytical solution for swelling around a borehole

Previous field and laboratory studies have shown that the creation of a borehole in a saturated cohesive soil mass induces significant pore water suctions in the vicinity of the hole. The dissipation of these pore water suctions (swelling) leads to local increases in the moisture content and hence a softening of the soil around the hole. This softening may have important consequences for the stability of the hole and also for the ultimate load capacity of any foundation elements (bored piles or drilled shafts) constructed in these holes. This paper presents a semi-analytical solution for the radial dissipation of pore water pressure around a freshly created, vertical hole. It is assumed the soil deforms elastically during the swelling process. The solutions are presented in the form of isochrones of excess pore water pressure and may be used to obtain estimates of the time required for the soil around the hole to swell and therefore to soften. Both permeable and impermeable borehole interfaces have been considered, together with either no support for the hole or partial support provided by hydrostatic pressure within the hole.     

Consolidation of axi-symmetric bodies subjected to non axi-symmetric loading

In many cases the analysis of the consolidation of axi-symmetric bodies subjected to non axi-symmetric loading may be carried out without recourse to a full three-dimensional treatment. Advantage may be taken of the axi-symmetric nature of the body and field quantities such as displacement and pore pressure can be given a Fourier representation. The problem is then reduced from one in three spatial dimensions (r, θ, z) and the time domain to one in two spatial dimensions (r, z) and the time domain.     

Organochlorine and heavy metal concentrations in blubber and liver tissue collected from Queensland (Australia) dugong (Dugong dugon)

Tissue samples of liver and blubber were salvaged from fifty-three dugong (Dugong dugon) carcasses stranded along the Queensland coast between 1996 and 2000. Liver tissue was analysed for a range of heavy metals and blubber samples were analysed for organochlorine compounds. Metal concentrations were similar in male and female animals and were generally highest in mature animals. Liver concentrations of arsenic, chromium, iron, lead, manganese, mercury and nickel in a number of individual animals were elevated in comparison to concentrations previously reported in Australian dugong. Dieldrin, DDT (and its breakdown products) and/or heptachlor epoxide were detected in 59% of dugong blubber samples. In general, concentrations of organochlorines were similar to those reported in dugong 20 years earlier, and were low in comparison to concentrations recorded from marine mammal tissue collected elsewhere in the world. With the exception of lead, the extent of carcass decomposition, the presence of disease or evidence of animal starvation prior to death did not significantly affect dugong tissue concentrations of metals or organochlorines. The results of the study suggest that bioaccumulation of metals and organochlorine compounds (other than dioxins) does not represent a significant risk to Great Barrier Reef dugong populations, particularly in the context of other pressures associated with coastal development and other anthropogenic activities.     

Late- and post-Variscan cooling and exhumation history of the northern Rhenish massif and the southern Ruhr Basin: new constraints from fission-track analysis

Apatite fission-track analyses were carried out on outcrop and core samples from the Rhenish massif and the Carboniferous Ruhr Basin/Germany in order to study the late- and post-Variscan thermal and exhumation history. Apatite fission-track ages range from 291±15 Ma (lower Permian) to 136±7 Ma (lower Cretaceous) and mean track lengths vary between 11.6 m and 13.9 m, mostly displaying unimodal distributions with narrow standard deviations. All apatite fission-track ages are younger than the corresponding sample stratigraphic age, indicating substantial post-depositional annealing of the apatite fission-tracks. This agrees with results from maturity modelling, which indicates 3500–7000 m eroded Devonian and Carboniferous sedimentary cover. Numerical modelling of apatite fission-track data predicts onset of exhumation and cooling not earlier than 320 Ma in the Rhenish massif and 300 Ma in the Ruhr Basin, generally followed by late Carboniferous–Triassic cooling to below 50–60°C. Rapid late Variscan cooling was followed by moderate Mesozoic cooling rates of 0.1–0.2°C/Ma, converting into denudation rates of <1 mm/a (assuming a stable geothermal gradient of 30°C/km). Modelling results also give evidence for some late Triassic and early Jurassic heating and/or burial, which is supported by sedimentary rocks of the same age preserved at the rim of the lower Rhine Basin and in the subsurface of the Central and Northern Ruhr Basin. Cenozoic exhumation and cooling of the Rhenish massif is interpreted as an isostatic response to former erosion and major base-level fall caused by the subsidence in the lower Rhine Basin.     

A procedure to locate slip surfaces beneath active landslides using surface monitoring data

Accurate determination of the slip surface profile beneath a landslip is difficult and costly using traditional methods, yet such knowledge is essential for stability analysis and for the design of remedial works. The technique presented here utilises measurements of surface displacements to predict the position and shape of the underlying slip surface. The proposed method has been tested in model studies of all major classes of landslip and on three large landslips. Results indicate that, from a knowledge of ground surface displacements alone, the position of the slip surface can be predicted to within 2% of the distance between movement monitoring stations on the ground surface.