Comparison of three oxidation methods used for the analysis of the dissolved organic carbon in seawater

Three methods for the determination of dissolved organic carbon in seawater were compared. Samples were analysed using persulphate oxidation, high-temperature combustion, and ultraviolet photo-oxidation. The dissolved organic carbon content of the seawater samples ranged from 0.6 to 1.6 mg C/I. This study shows that results of high-temperature oxidation and photo-oxidation procedures differ by less than 5%, whereas results with persulphate oxidation are about 15% less than those obtained with the high-temperature oxidation. The relative merits of each of the oxidation techniques for the determination of organic matter in seawater are discussed.     

The sea as a source of atmospheric phosphorus

The geochemical fractionation of phosphorus on the drop produced by bubbles bursting in seawater has been studied using a field sampling system called the Bubble Interfacial Microlayer Sampler (BIMS). The droplets from bursting bubbles were collected on filter samples in Narragansett Bay, Rhode Island during the summer of 1975. Phosphorus was found to be fractionated by the bubble-bursting process. The enrichment factor ranged from 4 to 170. Enrichment was found to increase with decreasing phosphorus concentration at 20 cm depth while it decreases with increasing wind velocity. Enrichment was independent of bubbling depth. Together these facts suggest that the sea-surface microlayer is the source of the phosphorus on the ejected drops. Organic phosphorus on the filter samples was found to be enriched relative to surface-water phosphorus by factors of 100–200, while reactive phosphorus was enriched by factors of only 6–8. This suggests that surface-active organic phosphorus compounds are the source phosphorus in the microlayer.The organic phosphorus content of samples of atmospheric particulates collected over the phosphate-rich upwelling waters near the Peru coast was found to correlate significantly with sea-salt sodium. Enrichments calculated using the average phosphorus concentration of the surface water in this area agree well with the results of the BIMS study. Thus it appears that phosphorus fractionation does occur in nature and may be important in supplying this nutrient to some coastal regions of the world.     

Preservation of enzymic activity in marine plankton by low-temperature freezing

The measurement of enzymic activity in plankton communities is useful in the study of marine ecosystems. Such measurements can lead to a clearer understanding of the biological transformations in plankton communities at a particular time. However, the assays are somewhat time-consuming. To facilitate analysis of large numbers of samples, we have developed a method of quick-freezing of whole cells and of cell-free extracts of the diatom, Skeletonema costatum, followed by storage at ?60°C for up to one week. No loss in either the electron transport system (ETS) or the glutamate dehydrogenase (GDH) activity occurs. Similar conditions of storage can be used for the preservation of ETS activity in the marine copepod Calanus pacificus. Also, no measurable loss in either the GDH or the ETS activity is detectable after the quick-frozen whole cells of S. costatum have been kept frozen for over a year.     

Solubility of hydrous ferric oxide and iron speciation in seawater

Iron solubility equilibria were investigated in seawater at 36.22‰ salinity and 25°C using several filtration and dialysis techniques. In simple filtration experiments with 0.05 μm filters and Millipore ultra-filters, ferric chlorides fluorides, sulfates, and FeOH²⁺ species were found to be insignificant relative to Fe(OH)₂⁺ at p[H⁺] = ?log [H⁺] greater than 6.0. Hydrous ferric oxide freshly precipitated from seawater yielded a solubility product of ${}^1\text{K}{}_{\mathrm{<mtext>so</mtext>}}\text{=}\text{[Fe}{}^{\mathrm{3+}}\text{][H}{}^{\mathrm{+}}\text{]}{}^{\mathrm{?3}}\text{= 4.7 · 10}{}^5$. Solubility studies based on the rates of dialysis of various seawater solutions and on the filtration of acidified seawater solutions indicated the existence of the Fe(OH)₃⁰ species. The formation constant for this species can be calculated as ${}^1\text{β}{}_3\text{=}\text{[Fe(OH)}{}_3{}^0\text{] [H}{}^{\mathrm{+}}\text{]}{}^3\text{/[Fe}{}^{\mathrm{3+}}\text{] = 2.4 · 10}{}^{\mathrm{?14}}$. The Fe(OH)₄^? species is present at concentrations which are negligible compared to Fe(OH)₂⁺ and Fe(OH)₃⁰ in the normal pH range of seawater. However, there is at least one other significant ferric complex in seawater above p[H⁺] = 8.0 (possibly with bicarbonate, carbonate, or borate ions) in addition to the Fe(OH)₂⁺ and Fe(OH)₃⁰ species.     

In situ tests for ice strength measurements

Ice effects have caused extensive damage. Enormous forces have been recorded. On the other hand, ice has been used as a structural material under various situations. To use ice beneficially and to assess the danger of ice forces, it is necessary to know the mechanical properties of ice.Results from the large number of ice tests carried out in laboratories show the difficulties of sampling and testing procedures. Most of the tests have not reproduced faithfully enough the conditions existing in nature. To obtain adequate results, laborious and slow samplings and preparations of test specimens have been necessary. Recently, extensive use has been made of in situ tests in order to reduce the number of factors whixh can induce errors in measurements. Large scale tests have simulated actual structures. General ice properties have become available from small-scale in situ tests. Since these tests give rapid results, a large number are already available with a good coverage of field conditions.A theoretical basis has been devised for these in situ tests which measure essentially the unconfined and confined compressive strengths of ice, and practical devices have been developed to execute these tests. A correlation of measurements from laboratory tests and in situ tests has established a link between natural and artificial environments. Brittle elastic and clastic theories have been applied, to find the best correlations for ice tests. Test results have been related to the mechanical properties as used in engineering practice.A very summary conclusion of results is that cold sea ice and cold fresh water ice are both very strong. However, depending on the load rate, ice can be quite brittle, which mitigates dangerous effects from ice action against massive structures.     

Random wave-current interactions in water of varying depth

Refraction of incoherent random gravity waves with currents and bottom topography results in spatial variations in the spectral characteristics of the free surface. Prediction of such variations based on the radiation transfer equation is in a simple analytic form for the case of one dimensional inhomogeneities in currents and topography. This analytic form is examined in terms of two-dimensional wave number- and polar frequency-direction spectra along the associated dynamic and kinematic constraints relevant to wave breaking and reflection. Results are specialized to the simplest case of horizontal shear currents in deep and shallow water with explicit examples to illustrate the relative and combined effects of currents and topography on free surface spectra.     

Reflection of long internal waves of small amplitudes from an underwater slope

The dynamics of long waves in the vicinity of a transition point of a two-layer flow into a single-layer one is studied within the linear theory of shallow water. The analogy between this problem and the classical problem of surface wave runup on the shore is shown. Conditions for breaking internal waves on a slope are discussed.     

Distribution and characteristics of marine habitats in a subpolar bay based on hydroacoustics and bed shear stress estimates—Potter Cove,King George Island,Antarctica

Marine habitats worldwide are increasingly pressurized by climate change, especially along the Antarctic Peninsula. Well-studied areas in front of rapidly retreating tidewater glaciers like Potter Cove are representative for similar coastal environments and, therefore, shed light on habitat formation and development on not only a local but also regional scale. The objective of this study was to provide insights into habitat distribution in Potter Cove, King George Island, Antarctica, and to evaluate the associated environmental processes. Furthermore, an assessment concerning the future development of the habitats is provided. To describe the seafloor habitats in Potter Cove, an acoustic seabed discrimination system (RoxAnn) was used in combination with underwater video images and sediment samples. Due to the absence of wave and current measurements in the study area, bed shear stress estimates served to delineate zones prone to sediment erosion. On the basis of the investigations, two habitat classes were identified in Potter Cove, namely soft-sediment and stone habitats that, besides influences from sediment supply and coastal morphology, are controlled by sediment erosion. A future expansion of the stone habitat is predicted if recent environmental change trends continue. Possible implications for the Potter Cove environment, and other coastal ecosystems under similar pressure, include changes in biomass and species composition.     

Viruses,bacteria, and heterotrophic nanoflagellates in Laptev Sea plankton

The paper considers the concentrations and functional characteristics of viruses, bacteria, and heterotrophic nanoflagellates determined for the first time in the Laptev Sea in August-September, 2014. The abundance of bacteria, viruses, and heterotrophic nanoflagellates varied from 110.1 × 10³ to 828.4 × 10³ cells/mL, from 384.2 × 10³ to 2932.8 × 10³ particles/mL, and from 108 to 651 cells/mL, respectively. The daily bacterioplankton production varied from 4.2 × 10³ to 381.7 × 10³ cells/mL, with an average of 117.6 × 10³ cells/mL. Electron transmission microscopy has for the first time shown that the frequency of visibly infected bacterial cells varied from 0.2 to 2.0% (0.8% on average) of N_B. The average virus-induced mortality of bacteria was 6.3% of bacterioplankton production, with variations ranging from 1.4 to 16.9%. Grazing on bacteria by heterotrophic nanoflagellates contributed more to bacteria mortality than virus-induced bacterial lysis. By grazing on bacteria, heterotrophic nanoflagellates consumed large quantities of viruses located on the surface and inside bacterial cells.