Mapping distortion of detectors in UVIT onboard AstroSat observatory

Ultraviolet Imaging Telescope (UVIT) is one of the payloads onboard AstroSat, India’s first multi-wavelength Astronomy mission. UVIT is primarily designed to make high resolution images in wide field, in three wavelength channels simultaneously: FUV (130–180 nm), NUV (200–300 nm) and VIS (320–550 nm). The intensified imagers used in UVIT suffer from distortions, and a correction is necessary for these to achieve good astrometry. In this article we describe the methodology and calculations used to estimate the distortions in ground calibrations.     

Sedimentary environments of the east-central Bering Sea continental shelf

A factor analysis of 180 bottom sediment samples from the east-central Bering Sea continental shelf identifies five factors that account for 95% of the variation in the 17 whole ø size classes that were used as variables. Factor I represents coarse sediments that have been bypassed in areas of active water circulation. Factors II and III represent fine and very fine sands that have been hydraulically sorted, reworked, and mixed. Factor IV represents coarse to medium silt that has been segregated from areas of relatively high energy. Factor V represents both the production of sediments finer than medium silt and deposition within the lowest-energy environment in this area.Modern and palimpsest sediments are areally prevalent over this section of the shelf. Relict sediments occur in only a few small areas. The dispersal of sediments is affected by surface and tidal currents as well as wave action. Ice rafting is not an important geological agent. Data from the eastcentral Bering Sea shelf indicate that sediments on subarctic continental shelves are not necessarily characterized by an abundance of rocky sediments or gravel.     

Hydrochemical variations during flood pulses in the south‐west China peak cluster karst: impacts of CaCO3–H2O–CO2 interactions

High‐resolution measurements of rainfall, water level, pH, conductivity, temperature and carbonate chemistry parameters of groundwater at two adjacent locations within the peak cluster karst of the Guilin Karst Experimental Site in Guangxi Province, China, were made with different types of multiparameter sonde. The data were stored using data loggers recording with 2 min or 15 min resolution. Waters from a large, perennial spring represent the exit for the aquifer's conduit flow, and a nearby well measures water in the conduit‐adjacent, fractured media. During flood pulses, the pH of the conduit flow water rises as the conductivity falls. In contrast, and at the same time, the pH of groundwater in the fractures drops, as conductivity rises. As Ca²⁺ and HCO₃^? were the dominant (>90%) ions, we developed linear relationships (both r² > 0·91) between conductivity and those ions, respectively, and in turn calculated variations in the calcite saturation index (SI_C) and CO₂ partial pressure (P) of water during flood pulses. Results indicate that the P of fracture water during flood periods is higher than that at lower flows, and its SI_C is lower. Simultaneously, P of conduit water during the flood period is lower than that at lower flows, and its SI_C also is lower. From these results we conclude that at least two key processes are controlling hydrochemical variations during flood periods: (i) dilution by precipitation and (ii) water–rock–gas interactions. To explain hydrochemical variations in the fracture water, the water–rock–gas interactions may be more important. For example, during flood periods, soil gas with high CO₂ concentrations dissolves in water and enters the fracture system, the water, which in turn has become more highly undersaturated, dissolves more limestone, and the conductivity increases. Dilution of rainfall is more important in controlling hydrochemical variations of conduit water, because rainfall with higher pH (in this area apparently owing to interaction with limestone dust in the lower atmosphere) and low conductivity travels through the conduit system rapidly. These results illustrate that to understand the hydrochemical variations in karst systems, considering only water–rock interactions is not sufficient, and the variable effects of CO₂ on the system should be evaluated. Consideration of water–rock–gas interactions is thus a must in understanding variations in karst hydrochemistry. Copyright © 2004 John Wiley & Sons, Ltd.     

Influence of the seasonal thermocline on the intrusion of Kuroshio across the continental shelf northeast of Taiwan

The hydrographic surveys in an area immediately northeast of Taiwan showed that the Kuroshio surface water intruded onto the shelf in the spring and there was a thick mixed layer and weak vertical stratification in the Kuroshio at the time. During the summer season, a strong thermocline was developed in the Kuroshio and the flow shifted offshore from Taiwan in front of the continental shelf break of the East China Sea. A numerical model is used to examine the effect of this seasonal thermocline on the flow pattern of the survey area. We find that the surface strength of the disturbance above the Su-Ao ridge is closely related to the occurrence of the on-shelf intrusion of Kuroshio. The presence of a seasonal thermocline in the Kuroshio can greatly diminish this disturbance in the surface level.     

Yesterday's Freeway Network of Tomorrow

In 1939, the Futurama exhibit at the New York World's Fair amazed visitors with its diorama showing futuristic freeways crossing the countryside and reshaping cities. After the fair, the exhibit's designer, Norman Bel Geddes, elaborated the model into a proposal for a national freeway network. This paper examines the network structure and geographic dimensions of Bel Geddes's vision and compares it to the Interstate Highway System, created several years later. Despite the futuristic trappings inherited from the Futurama model, the two networks are surprisingly similar except in their relation to cities, which Bel Geddes's network avoids. The majority of elements in Bel Geddes's system have been incorporated into actual routes and networks, and it can be expected that his system would have gone through many of the same adaptations to changing economic, environmental, and political circumstances as the Interstate Highway System.     

Ti-in-zircon thermometry applied to contrasting Archean metamorphic and igneous systems

Ti-in-zircon thermometry with SHRIMP II multi-collector has been applied to two well-documented Archean igneous and metamorphic samples from southern West Greenland. Zircons from 2.71 Ga partial melt segregation G03/38 formed in a small (< 1 m³), closed system within a mafic rock under high pressure granulite facies conditions. Results of 14 Ti analyses present a mean apparent zircon crystallization temperature of 679 ± 11 °C, underestimating independent garnet-clinopyroxene thermometry by 20–50 °C but consistent with reduced a_TiO2 in this system. 36 spot analysis on 15 zircons from 3.81 Ga meta-tonalite G97/18, with an estimated magmatic temperature > 1000 °C, yield a low-temperature focused normal distribution with a mean of 683 ± 32 °C, further demonstrated by high resolution Ti mapping of two individual grains. This distribution is interpreted to represent the temperature of the residual magma at zircon saturation, late in the crystallization history of the tonalite. Hypothetically, Ti-in-zircon thermometry on Eoarchaean detrital zircons sourced from such a high temperature tonalite would present a low-temperature biased image of the host magma, which could be misconstrued as being a minimum melt granite. Multiple analyses from individual zircons can yield complex Ti distributions and associated apparent temperature patterns, reflecting cooling history and local chemical environments in large magma chambers. In addition to inclusions and crystal imperfections, which can yield apparent high temperature anomalies, zircon surfaces can also record extreme (> 1000 °C) apparent Ti temperatures. In our studies these were traced to ⁴⁹Ti (or a molecular isobaric interference) contamination derived from the double sided adhesive tape used in sample preparation, and should not be assigned geological significance.     

The stratigraphic and geographic distribution of giant craters and remobilised sediment mounds on the mid Norway margin,and their relation to long term fluid flow

Large craters associated with mounds of remobilised sediment have been recently mapped on the mid Norway margin in the Møre Basin. These craters and mounds may be linked to the long term migration of fluids upwards from the lower levels of the Møre Basin which exploit hydrothermal vent complexes emplaced in the late Paleocene and early Eocene. All of the craters are located on a regionally correlative seismic surface that is correlated with the basal shear plane of Slide W, a slide located at the base of the Plio-Pleistocene Naust Formation. The Craters are positioned in the western area of the Møre Basin at the foot of the continental slope on the crests and flanks of Miocene domes, where Oligocene biosiliceous ooze subcrops on the basal shear surface of Slide W. Not all of the craters are filled by Slide W. Mounds are emplaced above those craters which are filled by Slide W on the top surface of Slide W. Stratal relationships show that the mounds were emplaced on the paleo-seabed. We present and discuss two models that illustrate processes that may have been involved in the formation of craters and remobilisation of sediments. In one model, an eruption of fluid from beneath remobilises ooze into ooze mounds in a single event triggering slope failure, whereas in the other model the emplacement of Slide W and later slides loads low density ooze causing it to undergo liquefaction, a process which may have been facilitated by the trapping of continuous long term fluid migrating from beneath, causing the ooze to remobilise into ooze mounds in two or more events.     

Does canopy wetness matter? Evapotranspiration from a subtropical montane cloud forest in Taiwan

Evapotranspiration (ET) and canopy wetness were measured over a 2‐year intensive field campaign at the Chi‐Lan Mountain cloud forest site in Taiwan. Eddy covariance and sap flow methods were applied to measure ET and tree sap flow of the endemic yellow cypress (Chamaecyparis obtusa var. formosana). ET was 553 mm yr^?1 over the study period with an annual rainfall and fog deposition of 4893 and 288 mm yr^–1, respectively. The duration of canopy wetness exceeded actual fog or rain events (mostly in the afternoon), and the intercepted water was evaporated later in the following dry morning. The cumulative wet duration accounted for 52% of time over the study period, which was longer than the duration of rainfall and fog altogether (41%). As it adapted to the extremely moist environment, the yellow cypress behaved in a wet‐enhanced/dry‐reduced water use strategy and was sensitive to short periods of dry atmosphere with high evaporation potential. During dry days, the sap flow rate rose quickly after dawn and led to conservative water use through midday and the afternoon. During periodically wet days, the canopy was mostly wetted in the morning, and the interception evaporation contributed largely to the morning ET. The initiation of morning sap flow was postponed 1–3 h, and the sap flow rate tended to peak later at midday. The midday canopy conductance was higher in the periodically wet days (10.6 mm s^–1) as compared with 7.6 mm s^?1 in the dry days. Consequently, the dry‐reduced water use strategy led to much lower annual ET with respect to the available energy (~46%) and high precipitation input (~11%). The moist‐adapted ecohydrology we report reveals the vulnerability of montane cloud forests to prolonged fog‐free periods. More research is urgently needed to better understand the resilience of these ecosystems and formulate adaptive management plans. Copyright © 2012 John Wiley & Sons, Ltd.     

Giant sandstone pipes record basin-scale liquefaction of buried dune sands in the Middle Jurassic of SE Utah

Giant sandstone pipes crop out over a 20 000 km² area of SE Utah. They range from metres to decametres in diameter and crosscut more than 100 m of continental sediments. New and published observations, encompassing all known pipe localities in SE Utah, suggest that the pipes formed by upward movement of groundwater, sand and sediment blocks in response to liquefaction of buried dune sands. Pipe formation was most likely triggered by seismicity during a phase of Cordilleran shortening and regional tectonic reorganization in the late Middle Jurassic. The depth of liquefaction recorded by the pipes far exceeds depths usually considered in earthquake engineering.     

Climate change simulated by full and mixed-layer ocean versions of CSIRO Mk3.5 and Mk3.0: Large-scale sensitivity

The CSIRO Mk3.5 coupled atmosphere-ocean model includes upgrades to atmospheric and oceanic processes that remove a cold bias of the earlier Mk3.0. The global mean warming over the 21st century from Mk3.5 is 3.1 K under the CMIP3 A1B scenario, some 25% larger than that from Mk3.0. Two mixed-layer ocean versions of Mk3.5 were constructed, and these are also more sensitive than Mk3.0. To elucidate these differences, a simple feedback analysis is extended to Mk3.5, using changes for doubled CO₂ in each model version. The net feedback for the low-mid latitude region is the main driver of the sensitivity contrast. The clear-sky component is consistently larger in Mk3.5, as is the increase in specific humidity, even after standardizing by the global warming. Cloud forcing provides a small positive feedback, which is stronger in cases that had larger declines in low-layer cloud. The net positive feedback for the higher-latitude region is larger in the coupled Mk3.5 than Mk3.0, which had more stable Arctic sea ice. However, some contrasts differed among the versions. As for Mk3.0, the surface warming in the coupled Mk3.5 is suppressed over that from the MLO case. Over the ocean, the pattern of suppression is similar to the change in energy flux into the surface in the coupled model. There is also a gradient of equatorial warming in the Asia-Pacific region that relates to the change in net convergence of heat transport by ocean currents. The effect of this pattern on regional rainfall is a focus of Part 2 of the study.