GPS signal acquisition using the repeatability of successive code phase measurements

This paper introduces a new method for GPS signal acquisition, which is based on the repeatability of successive code phase measurements and the M-of-N search algorithm. The performance of the proposed method in terms of probability of signal detection is similar to that of traditional methods, except that the calculation of the probability of detection does not rely on the noise distribution or the Carrier-to-Noise ratio (C/N₀). The code phase repeatability-based method is presented along with equations for probability of detection and probability of false detection. If the distribution of the noise is known, it also provides an estimate of the C/N₀. The proposed method is illustrated for coherent and non-coherent acquisition and C/N₀ estimation.     

Mirdita Zone ophiolites and associated sediments in Albania reveal Neotethys Ocean origin

The Mirdita Ophiolite Zone in Albania is associated with widespread mélanges containing components of up to nappe-size. We dated matrix and components of the mélange by radiolarians, conodonts, and other taxa. The components consist of radiolarites, pelagic limestones and shallow-water limestones, all of Triassic age, as well as ophiolites. Triassic radiolarite as a primary cover of ophiolite material proves Middle Triassic onset of Mirdita ocean-floor formation. The mélange contains a turbiditic radiolarite-rich matrix (“radiolaritic flysch”), dated as Late Bajocian to Early Oxfordian. It formed as a synorogenic sediment during west-directed thrusting of ophiolite and sediment-cover nappes representing ocean floor and underplated fragments of the western continental margin. The tectonic structures formed during these orogenic events (“Younger Kimmeridian or Eohellenic Orogeny”) are sealed by Late Jurassic platform carbonates. The geological history conforms with that of the Inner Dinarides and adjoining areas; we therefore correlate the Mirdita-Pindos Ophiolite Zone with the Vardar Zone and explain its present position by far-distance west-directed thrusting.     

Light Requirements for Growth and Survival of Eelgrass (<Emphasis Type="Italic">Zostera marina</Emphasis> L.) in Pacific Northwest (USA) Estuaries

We developed light requirements for eelgrass in the Pacific Northwest, USA, to evaluate the effects of short- and long-term reductions in irradiance reaching eelgrass, especially related to turbidity and overwater structures. Photosynthesis-irradiance experiments and depth distribution field studies indicated that eelgrass productivity was maximum at a photosynthetic photon flux density (PPFD) of about 350–550 μmol quanta m⁻² s⁻¹. Winter plants had approximately threefold greater net apparent primary productivity rate at the same irradiance as summer plants. Growth studies using artificial shading as well as field monitoring of light and eelgrass growth indicated that long-term survival required at least 3 mol quanta m⁻² day⁻¹ on average during spring and summer (i.e., May-September), and that growth was saturated above about 7 mol quanta m⁻² day⁻¹. We conclude that non-light-limited growth of eelgrass in the Pacific Northwest requires an average of at least 7 mol quanta m⁻² day⁻¹ during spring and summer and that long-term survival requires a minimum average of 3 mol quanta m⁻² day⁻¹.     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

Uncertainty as the overlap of alternate conditional distributions

An important task in modern geostatistics is the assessment and quantification of resource and reserve uncertainty. This uncertainty is valuable support information for many management decisions. Uncertainty at specific locations and uncertainty in the global resource is of interest. There are many different methods to build models of uncertainty, including Kriging, Cokriging, and Inverse Distance. Each method leads to different results. A method is proposed to combine local uncertainties predicted by different models to obtain a combined measure of uncertainty that combines good features of each alternative. The new estimator is the overlap of alternate conditional distributions.     

Groundwater resources in the Jabal Al Hass region,northwest Syria: an assessment of past use and future potential

In many cases, the development of groundwater resources to boost agricultural production in dry areas has led to a continuous decline in groundwater levels; this has called into question the sustainability of such exploitation. In developing countries, limited budgets and scarce hydrological data often do not allow groundwater resources to be assessed through groundwater modeling. A case study is presented of a low-cost water-balance approach to groundwater resource assessments in a 1,550 km² semi-arid region in northwestern Syria. The past development of irrigated agriculture and its effect on the groundwater system were studied by analysis of Landsat images and long-term groundwater level changes, respectively. All components of the groundwater balance were determined. Groundwater recharge was estimated using the chloride mass balance method. Over the past three decades, groundwater levels have declined, on average, 23 m, coinciding with a two-fold increase in the groundwater-irrigated area. Groundwater resources are currently depleted by a value that lies between 9.5×10⁶ and 118×10⁶ m³ year^?1, which is larger than can be compensated for by a future decrease in natural discharge or changes in boundary conditions. However, groundwater resources are likely to be sufficient to supply domestic and livestock needs in the area.     

High heat flow anomalies on an old oceanic plate observed seaward of the Japan Trench

Thirty-three new measurements on the seaward slope and outer rise of the Japan Trench along a parallel of 38°45′N revealed the existence of high heat flow anomalies on the subducting Pacific plate, where the seafloor age is about 135 m.y.. The most prominent anomaly with the highest value of 114 mW/m² is associated with a small mound on the outer rise, which was reported to be a kind of mud volcano. On the seaward slope of the trench, heat flow is variable: high (70–90 mW/m²) at some locations and normal for the seafloor age (about 50 mW/m²) at others. The spatial variation of heat flow may be related to development of normal faults and horst/graben structures due to bending of the Pacific plate before subduction, with fluid flow along the fault zones enhancing the vertical heat transfer. Possible heat sources of the high heat flow anomalies are intra-plate volcanism in the last several million years like that discovered recently on the Pacific plate east of the Japan Trench.     

Inversely-Mapped Analytical Solutions for Flow Patterns around and within Inclined Elliptic Inclusions in Fluid-Saturated Rocks

In this paper, an inverse mapping is used to transform the previously-derived analytical solutions from a local elliptical coordinate system into a conventional Cartesian coordinate system. This enables a complete set of exact analytical solutions to be derived rigorously for the pore-fluid velocity, stream function, and excess pore-fluid pressure around and within buried inclined elliptic inclusions in pore-fluid-saturated porous rocks. To maximize the application range of the derived analytical solutions, the focal distance of an ellipse is used to represent the size of the ellipse, while the length ratio of the long axis to the short one is used to represent the geometrical shape of the ellipse. Since the present analytical solutions are expressed in a conventional Cartesian coordinate system, it is convenient to investigate, both qualitatively and quantitatively, the distribution patterns of the pore-fluid flow and excess pressure around and within many different families of buried inclined elliptic inclusions. The major advantage in using the present analytical solution is that they can be conveniently computed in a global Cartesian coordinate system, which is widely used in many scientific and engineering computations. As an application example, the present analytical solutions have been used to investigate how the dip angle of an inclined elliptic inclusion affects the distribution patterns of the pore-fluid flow and excess pore-fluid pressure when the permeability ratio of the elliptic inclusion is of finite but nonzero values.     

Some results of biogeographic research on meadows in the Dyje-Svratka basin in the Czech Republic

Some results of biogeographic research on meadows in the Dyje-Svratka basin in the Czech Republic. The paper shows one example of biogeographic inventory of natural ecosystems in an unflooded meadow in the Dyje-Svratka basin. It is part of the complex physio-geographic research of the Geographic Department of the Masaryk University in Brno aimed at gaining a basis for territorial interpretation of ecological regularities and territorial application of general ecological optimizing principles. A segment of biocenosis of Ulmi-fraxineta carpini has been analyzed (Zlatník 1956).The endeavour of Czech geographers to study geosystems of various dimensions completely gets in the limelight. In question is the understanding of mutual relationship of components of geosystems based on the exchange of mass and energy. There are two ways of studying them: spatial relations or approaches concentrated on processes. In contrast to the above unilateral concept, the endeavour to make the approaches compatible appears rarely. This complex view is made possible by geobiocenologically taken biogeography in papers of Zlatník and Rauer, their students and successors. This paper shows only one example of the results of biogeographic stock-taking of meadows in the Dyje-Svratka basin, indicating relations of eco- and geosystems which confirm the necessity of ecological orientation of the present biogeography and its potential contribution to ecology.     

Geochronology and geochemistry of eclogites from the Mariánské Lázně Complex,Czech Republic: Implications for Variscan orogenesis

The Mariánské Lázn complex (MLC) is located in the Bohemian Massif along the north-western margin of the Teplá-Barrandian microplate and consists of metagabbro, amphibolite and eclogite, with subordinate amounts of serpentinite, felsic gneiss and calcsilicate rocks. The MLC is interpreted as a metaophiolite complex that marks the suture zone between the Saxothuringian rocks to the north-west and the Teplá-Barrandian microplate to the south-east. Sm-Nd geochronology of garnet-omphacite pairs from two eclogite samples yields ages of 377±7, and 367±4 Ma. Samples of eclogite and amphibolite do not define a whole rock Sm-Nd isochron, even though there is a large range in Sm/Nd ratio, implying that the suite of samples may not be cogenetic. Eclogites do not have correlated _Nd values and initial ⁸⁷Sr/⁸⁶Sr ratios. Five of the eight eclogite samples have high _Nd values (+10.2 to +7.1) consistent with derivation from a MORB-like source, but variable ⁸⁷Sr/⁸⁶Sr ratios (0.7033 to 0.7059) which probably reflect hydrothermal seawater alteration. Three other eclogite samples have lower _Nd values (+ 5.4 to –0.8) and widely variable ⁸⁷Sr/⁸⁶Sr ratios (0.7033 to 0.7096). Such low _Nd values are inconsistent with derivation from a MORB, source and may reflect a subduction or oceanic island basalt component in their source. The MLC is an important petrotectonic element in the Bohemian Massif, providing evidence for Cambro-Ordovician formation of oceanic crust and interaction with seawater, Late Devonian (Frasnian-Famennian) high- and medium-pressure metamorphism related to closure of a Saxothuringian ocean basin, Early Carboniferous (Viséan) thrusting of the Teplá terrane over Saxothuringian rocks and Late Viséan extension.