A Fluid Inclusion Study on Columnar Adularia from the Hishikari Low-sulfidation Epithermal Gold Deposit, Japan

Abstract: In the Hishikari low-sulfidation epithermal gold deposit, Japan, columnar adularia crystals commonly precipitated directly on to the fracture surface of wall rock, and then electrum precipitated on the columnar adularia with fine-grained adularia and quartz. To reveal the characteristics of mineralizing fluids and the elevation of paleo-water tables at the earliest stage of mineralization in the Honko-Sanjin zone of the Hishikari deposit, the fluid inclusions in the columnar adularia in gold-bearing quartz–adularia veins were studied.
Coexistence of vapor-rich and liquid-rich two–phase primary fluid inclusions indicates the deposition of columnar adularia from boiling fluids. The precipitation temperatures range from 175 to 215C, and generally increase with depth. The temperatures of final melting point of ice range from –1.2 to –0.1C with an average of –0.5C, corresponding to salinity ranging from 0.2 to 2.1 wt% NaCl equivalent with an average of 0.9 wt% NaCl (eq.). Concentrations of non-condensable gases such as CO₂ were under the detection limit of a laser Raman microprobe spectrometer. From the precipitation temperature of columnar adularia in the Hosen–2 vein and the boiling point – depth curve for a 0.9 wt% NaCl (eq.) fluid, paleo-water table was estimated to be at an elevation of about +170 m. The elevation of the paleo-water tables for other veins was estimated to range from +140 to +215 m.     

Specific accumulation of persistent organochlorines in bluefin tuna collected from Japanese coastal waters

Concentrations of persistent organochlorines (OCs) such as PCBs, DDTs, chlordanes (CHLs), HCHs and HCB were determined in the liver of bluefin tuna (Thunnus thynnus) collected from Japanese coastal waters in order to elucidate accumulation profiles and to evaluate the suitability of this species as a biomonitor for pollution in the open sea ecosystem. Concentrations of PCBs, DDTs and CHLs in bluefin tuna increased significantly with body length (30–190 cm). HCHs and HCB residues were comparable among all the sampling regions, and the levels of these chemicals did not show correlation with body length. These results suggest significance of dietary uptake of PCBs, DDTs and CHLs compared to the intake via the gill. On the other hand, equilibrium partitioning with ambient water is a major determinant of the levels of HCHs and HCB in tuna. Body-length normalized values (BLNV) of PCBs, DDTs and CHLs concentrations in bluefin tuna were calculated using the linear regression equation obtained from the plot of concentrations and body length. BLNV of these chemicals on a lipid wt basis, which was adjusted for 100 cm body length, were indicative of the present state water pollution by PCBs, DDTs and CHLs. These results suggest that bluefin tuna is a suitable bioindicator for monitoring OCs contamination in the open sea ecosystem.     

Modification of North Pacific Intermediate Water around Mixed Water Region

The mixing processes in the Mixed Water Region (MWR) that lead to changes in the properties of North Pacific Intermediate Water (NPIW) have been studied using observational data sets obtained in May–June 1998. Neutral surfaces, the equation of water mass conversion rate on neutral surfaces and the equation of vertical velocity across neutral surfaces have been used to distinguish dominant processes by assuming the horizontal scale to be the streamer scale (under 100 km). The possibility of double diffusive convection is also discussed in relation to the density ratio. These results may be summarized as follows: (1) the difference between the potential density surface and the neutral surface may rise to −0.04 kg/m³ around the source water of NPIW; (2) horizontal diffusion causes strong modifications of the source water of NPIW; (3) the density range within which strong modification of the source water of NPIW occurs becomes dense from the northern part of MWR near the Oyashio Front to the southern part near the Kuroshio Front, and to the eastern part. Our modeling of these processes shows that cabbeling has effects on the density increment of the source water of NPIW in the northern and southern part of MWR. Double diffusive convection has effects on the density increment of the source water of NPIW, mainly in the northern part of MWR. The possible density increment due to cabbeling in these areas is estimated to be 0.01≈0.03 kg/m³. The possible density increment due to double diffusive convection is 0.01≈0.03 kg/m³. The total density increment due to cabbeling and double diffusive convection amounts to 0.06 kg/m³. This revised version was published online in July 2006 with corrections to the Cover Date.     

New record of <Emphasis Type="Italic">Lobophora rosacea</Emphasis> (Dictyotales; Phaeophyceae) from the South China Sea

Lobophora rosacea C.W. Vieira, Payri et De Clerck is reported from the South China Sea for the first time. Our specimens are very similar to L. rosacea recently described from New Caledonia, not only in morphology but also in rbcL and cox3 gene sequences. The fan-shaped thallus grows erectly, attaching to the substrate by a basal holdfast. The thallus is composed of a single layer of large medullary cells and three to four layers of cortical cells on both sides of the medulla. Mature sporophytes are detected, with sporangium sori scattered on both surfaces of the thallus.     

Giant planet formation

The accumulation of giant planets involves processes typical for terrestrial planet formation as well as gasdynamic processes that were previously known only in stars. The condensible element cores of the gas-giants grow by solid body accretion while envelope formation is governed by stellar-like equilibria and the dynamic departures thereof. Two hypotheses for forming Uranus/Neptune-type planets — at sufficiently large heliocentric distances while allowing accretion of massive gaseous envelopes, i.e. Jupiter-type planets at intermediate distances — have been worked out in detailed numerical calculations: (1) Hydrostatic gas-accretion models with time-dependent solid body accretion-rates show a slow-down of core-accretion at the appropriate masses of Uranus and Neptune. As a consequence, gas-accretion also stagnates and a window is opened for removing the solar nebula during a time of roughly constant envelope mass. (2) Gasdynamic calculations of envelope accretion for constant planetesimal accretion-rates show a dynamic transition to new envelope equilibria at the so called critical mass. For a wide range of solar nebula conditions the new envelopes have respective masses similar to those of Uranus and Neptune and are more tightly bound to the cores. The transitions occur under lower density conditions typical for the outer parts of the solar nebula, whereas for higher densities, i.e. closer to the Sun, gasdynamic envelope accretion sets in and is able to proceed to Jupiter-masses.     

Gas Measurement of Fluid Inclusions from the Hishikari Epithermal Gold Deposit, Southern Kyushu, Japan, Using Laser Raman Microprobe

Abstract. Laser Raman microprobe analysis was performed on the fluid inclusions from the Honko-Sanjin zone in the Hishikari epithermal gold deposit, southern Kyushu, Japan. Gas concentrations of fluid inclusions through the zone were below detection limits (e.g., 5 mmole/kg H₂O for CO₂), with an exception at shallow portion in which the CO₂/N₂ mole ratio was determined to be 5.3. Boiling of hydrothermal solutions probably separated gases from ore fluids at the deep portion of the deposit, and migration of gases to shallow portion resulted in CO₂-rich steam-heated water and related acid alteration.     

Estimating ground motions using recorded accelerograms

A procedure for estimating ground motions using recorded accelerograms is described. The premise of the study is the assumption that future ground motions will be similar to those observed for similar site and tectonic situations in the past. Direct techniques for scaling existing accelerograms have been developed, based on relative estimates of local magnitude,M _L . Design events are described deterministically in terms of fault dimension, tectonic setting (stress drop), fault distance, and site conditions. A combination of empirical and theoretical arguments is used to develop relationships betweenM _L and other earthquake magnitude scales. In order to minimize scaling errors due to lack of understanding of the physics of strong ground motion, the procedure employs as few intermediate scaling laws as possible. The procedure conserves a meaningful measure of the uncertainty inherent when predicting ground motions from simple parameterizations of earthquake sources and site conditions.     

Forced reconnection by nonlinear magnetohydrodynamic waves

Forced magnetic reconnection induced by magnetohydrodynamic (MHD) waves may account for the triggering of explosive solar activities such as flares. Reconnection in a neutral sheet plasma can be driven by the ponderomotive force associated with nonlinear MHD waves accompanying plasma vortex motion. The nonlinear stage of forced reconnection by MHD waves is simulated with a MHD particle-code: Some conditions for fast reconnection are discussed with applications to solar flares.     

Sumisu volcano,Izu-Bonin arc,Japan: site of a silicic caldera-forming eruption from a small open-ocean island

Sumisu volcano was the site of an eruption during 30–60 ka that introduced ∼48–50 km³ of rhyolite tephra into the open-ocean environment at the front of the Izu-Bonin arc. The resulting caldera is 8 × 10 km in diameter, has steep inner walls 550–780 m high, and a floor averaging 900 m below sea level. In the course of five research cruises to the Sumisu area, a manned submersible, two ROVs, a Deep-Tow camera sled, and dredge samples were used to study the caldera and surrounding areas. These studies were augmented by newly acquired single-channel seismic profiles and multi-beam seafloor swath-mapping. Caldera-wall traverses show that pre-caldera eruptions built a complex of overlapping dacitic and basaltic edifices, that eventually grew above sea level to form an island about 200 m high. The caldera-forming eruption began on the island and probably produced a large eruption column. We interpret that prodigious rates of tephra fallback overwhelmed the Sumisu area, forming huge rafts of floating pumice, choking the nearby water column with hyperconcentrations of slowly settling tephra, and generating pyroclastic gravity currents of water-saturated pumice that traveled downslope along the sea floor. Thick, compositionally similar pumice deposits encountered in ODP Leg 126 cores 70 km to the south could have been deposited by these gravity currents. The caldera-rim, presently at ocean depths of 100–400 m, is mantled by an extensive layer of coarse dense lithic clasts, but syn-caldera pumice deposits are only thin and locally preserved. The paucity of syn-caldera pumice could be due to the combined effects of proximal non-deposition and later erosion by strong ocean currents. Post-caldera edifice instability resulted in the collapse of a 15° sector of the eastern caldera rim and the formation of bathymetrically conspicuous wavy slump structures that disturb much of the volcano’s surface.     

Ambient vibration test of an anchorage of South Bisan-seto suspension bridge

Dynamical properties of an anchorage of South Bisan-seto Suspension Bridge are determined by means of in situ measurement of the ambient vibrations. This anchorage, being located in the sea, is tall and slender; its natural frequencies are expected to be low. On the other hand, the elasticity of the ground estimated from the conventional geological data is highly dispersed. It even suggests the possibility of resonance between the towers and this anchorage. It is therefore necessary to know its natural frequencies precisely. Seismic motions and microtremors are acquired and used properly. The observation is repeated every year during the period of construction of the anchorage so that its inertial properties change significantly. First modes of the longitudinal and the transversal vibrations of the anchorage are identified and their frequencies determined. The elasticity modulus estimated from these natural frequencies is about five times as large as that of the geological survey while it is consistent with that obtained from the velocity of the elastic waves of the ground.