天津滨海地区浅层剪切波速与基底构造关系研究

Shear wave velocity is one of the important dynamic characteristics of soil layers and applied widely in aseismic engineering. In this paper, 500 drill logging data are used to make a linear interpolation based on 0.01°×0.01°×1m grid. A shallow 3-D shear wave velocity structure of Tianjin coastal area is obtained. According to the data and geological background, we selected two typical velocity profiles to try to introduce and explain its relationship to basement structure. The results show that the shear wave velocity structure clearly presents the characteristic of stratification and lateral inhomogeneity. Furthermore, the difference of the shear wave structure between tectonic elements is clear and the velocity structure between the two sides of the local or border fault in the Quaternary is disturbed or affected significantly. It intuitively shows that the basement structure and fault activity of this region had good control of sedimentation development and strata formation in the Quaternary period which would have an important effect on engineering seismic and geological condition evaluation.     

东北冷涡南落型强对流天气的潜势预报分析

通过2005-2008年4-6月Micaps资料,查找500 hPa东北有冷涡,500 hPa和700 hPa江苏境内为大片的西北气流,当天午后到夜里出现强对流天气的若干典型个例,借助Micaps系统通过对一些个例的物理量资料分析,得出它们共同的发生强对流天气的机理;同时还分析得出诊断该类对流天气的不太适合使用的物理量和较适合使用的物理量;并分析个例的大气探空层结曲线,得出它们的对流层结与其它类型的区别,并剖析它们的一日转变情况;同时用Q矢量锋生函数方法分析,发现低层强锋生区域与强对流天气区域有较好的对应关系,锋生函数正值中心区域常出现个别站龙卷或大范围冰雹.     

电磁波井间CT成象技术及其在岩土工程中的应用

简要叙述了电磁波ＣＴ成象技术的基本原理、工作方法及其在岩土工程中诸如机场跑道、隧道工程和高层建筑地基评价中的应用。通过井下激发和观测电磁波能量的衰减，利用ＣＴ技术重建了地下介质在观测平面内相对吸收系数的二维分布图象，这些图象直观准确地反映出地下介质的构造形态、地层界面、风化壳以及破碎带的分布特征，在岩土工程探测中发挥了重要作用。     

用混合和扩散云室对大气冰核浓度的观测分析

继1963年用混合云室对春季冰核浓度观测之后，1994～1996年，在同季节、同地点用混合和静力扩散云室又做了同步观测。对取得的资料进行整理分析，得出了凝华核浓度在不同天气背景下占总冰核浓度的百分比，两种云室测值的对应关系；分析了扩散云室的容积效应及冰核浓度随气压、能见度等气象因子的变化。     

超慢速扩张环境下超镁铁质岩系统的热液硫化物成矿机理以及启示

西南印度洋63.5°E热液区是在超慢速扩张洋脊发现的首个超镁铁质岩热液系统。对取自该区的热液硫化物样品进行了系统的矿物学和地球化学分析,矿物学分析结果表明:该热液区硫化物为富Fe型高温硫化物,且经历了较深程度的氧化蚀变,大量中间态的Fe氧化物充填在硫化物矿物间的孔隙及内部解理中;这些硫化物相以白铁矿为主,其次是等轴古巴矿和少量铜蓝,缺乏黄铁矿、闪锌矿。据推断,该区的热液成矿作用分为4个阶段:低温白铁矿阶段→高温等轴古巴矿阶段→自形白铁矿阶段→后期海底风化阶段（少量铜蓝以及大量的Fe的羟氧化物）。与之相对应,地球化学分析结果表明这些硫化物的Fe含量较高（31.57%~44.59%）,Cu含量次之（0.16%~7.24%）,而Zn含量普遍较低（0.01%~0.11%）;微量元素较为富集Co（328×10-6~2 400×10-6）和Mn（48.5×10-6~1 730×10-6）。该区硫化物中较高含量的Fe、Co与超镁铁质岩热液系统相似,明显高于镁铁质岩热液系统。独特的热液硫化物矿物学特征和元素组成可能与该区普遍出露的地幔岩、橄榄岩蛇纹石化作用以及拆离断层的广泛发育的环境有关。     

水下航行体双空泡相互作用数值模拟研究

高速水下航行体头肩部和表面突起等位置很容易产生空泡,不失一般性,将表面突起结构简化为一定高度的台阶.针对简化的航行体模型,基于数值模拟方法研究了头肩部空泡与台阶处空泡、头肩部空泡与尾空泡2种类型的双空泡相互作用问题.不同的来流攻角下,头肩部空泡与台阶处空泡的作用过程存在区别,可以分为大攻角和小攻角2种类型.当尾空泡内有...     

Big spatial data for urban and environmental sustainability

ABSTRACT

Eighty percent of big data are associated with spatial information, and thus are Big Spatial Data (BSD). BSD provides new and great opportunities to rework problems in urban and environmental sustainability with advanced BSD analytics. To fully leverage the advantages of BSD, it is integrated with conventional data (e.g. remote sensing images) and improved methods are developed. This paper introduces four case studies: (1) Detection of polycentric urban structures; (2) Evaluation of urban vibrancy; (3) Estimation of population exposure to PM2.5; and (4) Urban land-use classification via deep learning. The results provide evidence that integrated methods can harness the advantages of both traditional data and BSD. Meanwhile, they can also improve the effectiveness of big data itself. Finally, this study makes three key recommendations for the development of BSD with regards to data fusion, data and predicting analytics, and theoretical modeling.     

周期性的或伴有贯穿流的西边界流跨隙流动的迟滞变异过程

使用1.5层准地转约化重力模式研究了周期性的或伴有贯穿流的西边界流跨隙流动的迟滞变异过程。当西边界流变化的周期比罗斯贝波在缺口处调整的时间尺度大得多时,在雷诺数增加和减少过程的霍夫分叉点都发生延迟,从而产生新的雷诺数迟滞区间;并且西边界流流态转变的临界值变化显著;且周期强迫越短,雷诺数迟滞区间越大。当西边界流变化的周期与罗斯贝波在缺口处调整的时间尺度相当时,西边界流在缺口的流态呈无迟滞的周期性变化,且西边界流入侵西海盆的程度随周期减少而变小。此外,当贯穿流的流量大于西边界流的一半时,会显著影响西边界流在缺口处的迟滞变异过程;西边界流向西入侵程度和流态转变发生的临界雷诺值均发生变化,且贯穿流流量越大变化越大。     

Experimental study on wide-shallow composite bucket foundation for offshore wind turbine under cyclic loading

As an appropriate type of foundation for offshore wind turbines (OWTs), wide-shallow composite bucket foundation (WSCBF) is cost-competitive, and it has a unique and special substructure that comprises seven internal rooms arranged in a honeycomb-like structure. In this study, the cyclic behavior of WSCBF for OWTs embedded in saturated clay was investigated using a large-scale model subjected to lateral cyclic loading. The responses of foundation under constant- and various-amplitude cyclic loadings were recorded in terms of displacements, rotations, and bending moments. The variations in stiffness and damping were obtained, and a collaborative bearing mechanical model between the bucket and soil was considered, which was beneficial for improving the stiffness of the whole structure. Accumulative deformation was found to have little effect on the bearing capacity of the foundation. Dynamic analysis in frequency domain was further performed on both moment and rotation data, and the complex, frequency-dependent impedance was also studied.     

A new method for the quantification of different redox-species of molybdenum (V and VI) in seawater

A new method for the direct determination of reduced and oxidized Mo species (Mo (V) and Mo (VI)) in seawater was developed and used for the first time. The method includes the complexation of Mo (V) with tartrate, solid phase extraction of the Mo (V)–tartrate complex by a XAD 7HP resin, followed by elution with acidic acetone. In this study, the eluted Mo (V) was quantified by graphite furnace atomic absorption spectrometry. The detection limit of this protocol was on the order of 0.2 nM. The analytical precision was 10% of ~ 10 nM. This method was successfully applied to the determination of Mo (V) and Mo (VI) in surface and bottom waters at the head of Peconic River Estuary. Total Mo (Mo (V) + Mo (VI)) ranged from 100–120 nM in most bottom saline waters, and 2.5–15 nM for surface fresher waters. Concentrations of Mo (V) in these environments ranged from 0 nM to ~ 15 nM, accounting for 0%–15% of the total dissolved Mo pool. The time series experiments showed that the Mo speciation changed within 1 h after the water collection, and therefore it is strongly suggested that speciation analysis be carried out within the first 15 min. However, since these are the first Mo speciation data in concentration ranges typical of normal marine and coastal waters, additional research may be required to optimize the methodology and further explore Mo cycling mechanisms.