黑河下游土壤和地下水盐分特征分析

根据405个土壤样品和101个水样,分析了黑河下游土壤盐分分布规律以及与地形地貌部位、地下水水化学的关系.结果表明:额济纳三角洲地区的土壤具有质地粗、含盐量高、盐分表聚性强的特征,该地区呈现盐碱化和沙漠化严重、可利用土地资源骤减、生态环境恶化的状况.在所有剖面上盐分的分布呈现漏斗型分布,土壤中盐分随地形变化较为复杂,但与地下水化学变化相一致.地下水矿化度普遍比较高,大多数地区的矿化度在800~3000 mg·L^-1之间变化;水化学类型主要有HCO₃·SO₄-Na、Cl·SO₄-Na(Ca)、HCO₃·Cl-Na(Ca)SO₄·Cl-Na和SO₄·Cl-Na(Ca-Mg).地下水矿化度的高低与补给源的距离远近密切相关,在河岸附近的矿化度变化幅度较小;在远离河道地区,随离岸距离的增减而升降,体现了矿化度的高低主要依赖于上游补给水量变化.     

全国七大流域设计径流变化分析及成果修订

在全国第二次水资源调查评价基础上,通过对比七大流域径流系列延长前后的变化情况,分析347个水文站点径流系列均值及特枯值的变化幅度,用以反映近10年各流域水文情势的变化情况。经分析,近10年天然来水总体偏枯,松辽、海河、黄河的设计径流呈现一定减小趋势,长江、淮河、太湖、珠江的设计径流变化趋势不显著。本次延长后的径流系列代表性总体较好,同时黄河流域还考虑近期下垫面对降雨径流关系影响,因此本次大多推荐七大流域延长后的设计径流成果,为开展全国第三次水资源调查评价提供一定的技术支撑。     

云南抚仙湖沉积物有机质来源与时空变化特征

为揭示抚仙湖沉积物总有机碳(TOC)和总氮(TN)的时空分布特征及其主要来源,对抚仙湖表层沉积物和沉积物柱芯的TOC、TN和有机碳同位素组成(δ13Corg)进行了分析。结果表明,表层沉积物的TOC和TN含量分别为2.02%~3.40%和0.16%~0.36%;沉积物柱芯的TOC和TN含量分别为0.41%~6.63%和0.08%~0.77%,呈现出北湖高南湖低、表层高底部低的分布特征。内源有机质是抚仙湖沉积物中有机质的主要来源,不同湖区外源有机质的输入差异明显,其中南湖沉积物有机质中陆源比例较高。沉积物柱芯C/N值从底部到表层逐步增大,表明抚仙湖沉积物有机质中陆源有机质所占比例持续增加。与内源有机质相比,外源有机质输入增加更快,指示流域内人为活动增强导致流域侵蚀和水土流失加剧。     

柴达木盆地西北古近系-新近系异常高压形成机制分析

柴达木盆地西北(以下简称“柴西北区”)古近系-新近系异常超压普遍存在。对超压的空间分布特征和形成机制的研究是评价该地区油气成藏条件与资源潜力的关键。依据柴西北区钻井实测压力数据及基于等效深度法计算的地层压力结果,对研究区异常高压的平面和剖面分布特征进行分析。在此基础上,结合柴西北区典型钻井泥岩声波时差曲线特征、不同时期沉积速率、各地层岩性特征、有机质生烃潜力及柴西北地区遭受的构造挤压作用,对研究区超压的形成机制进行分析,并对各控制要素在超压形成过程中的贡献进行定量评价。研究结果表明：柴西北区地层超压起始深度位于大约1 500 m,主要发育在古始新统路乐河组-中新统上干柴沟组内,总体上异常高压随深度加深逐渐增大。研究区超压的形成是多种因素综合作用的结果,其中欠压实作用、有机质生烃和构造挤压作用是该区超压形成演化的重要原因。对控制超压形成的各要素定量评价结果显示：欠压实作用是柴西北区超压形成的最重要控制因素,其贡献率高达60%;构造挤压作用次之,其贡献率在20%～30%左右;有机质生烃演化作用对超压形成也有影响,但贡献率相对较小。此外对柴西北区咸湖环境下的盐度分布特征研究初步表明,地层孔隙流体盐度和咸水半咸水环境下沉积的含盐塑性地层对超压的形成和保存也有一定的影响。     

Depositional System of the Carboniferous Huanglong Formation, Eastern Sichuan Basin: Constraints from Sedimentology and Geochemistry

Using analyses of the lithology, sequences, paleoenvironment, and tectonic setting, the depositional system of the Carboniferous Huanglong Formation in the eastern Sichuan Basin was identified. The lithological characteristics of the Lower Member, Middle Member, and Upper Member were analyzed and classified. Before the use of carbon, oxygen, and strontium isotopes in the analysis, all of the geochemical data were tested for validity. On the basis of the Z values obtained from carbon and oxygen isotopes, the paleoenvironments of the three members were elucidated. Lower Member was dominantly an enclosed marine environment with intense evaporation and little freshwater input into the sea. Middle Member developed in a semi-enclosed to normal marine environment with many rivers. Upper Member was formed in a normal marine environment. The east Sichuan Basin was enclosed by paleouplifts before the deposition of the Huanglong Formation, forming a relatively enclosed depositional setting. Paleogullies developed in the Silurian strata that underlie the Carboniferous rocks; these paleogullies can be identified. On the basis of a comprehensive analysis, we propose that the Huanglong Formation developed in a platform system. Four microfacies were identified: supratidal flat, dolostone flat, grain shoal, and shelf microfacies. The high-permeability and high-porosity characteristics of the grain shoal microfacies are favorable for hydrocarbon accumulation, while the supratidal flat and shelf microfacies developed very few high-quality reservoirs. The paleogullies, in which increased amounts of grain shoal microfacies developed, controlled the distribution of high-quality reservoirs.     

显微荧光光谱技术在油气成藏研究中的应用——以塔里木盆地巴什托上古生界油气藏为例

根据原油在紫外光的激发下产生荧光的特点,通过显微荧光光谱方法,对有机包裹体的荧光光谱进行定量化分析,利用其主峰波长与荧光强度、主峰波长与红/绿商的相关性,对塔里木盆地巴什托上古生界油气藏的成藏特征进行了初步研究。在研究区所采集的32块岩石样品中共获得64个荧光光谱数据。分析结果表明,巴什托上古生界油气藏存在3个油源,其主峰波长主要集中在439~443nm、469~472 nm和498~503 nm三个值段上,且为不同演化阶段的混源充注。前两者来自于寒武—奥陶系烃源岩,由下至上充注成藏;后一油源来自于石炭系巴楚组,随演化程度的变化同时向上、下两个方向充注。综合同期捕获不同主峰波长的有机包裹体,推测研究区至少存在4期油充注、1期天然气充注。     

Zircon U–Pb ages and O–Nd isotopic composition of basement rocks in the North Qinling Terrain, central China: evidence for provenance and evolution

The Qinling Group was previously interpreted as the oldest Precambrian basement unit of the North Qinling Terrain, recording its formation and early crustal evolution. The Qinling Group consists predominantly of gneisses, amphibolites, and marbles, which underwent multi-phase deformation and metamorphism. In order to better constrain the provenance and tectonic setting of this group and the evolution of the North Qinling orogenic belt, in situ U–Pb dating and oxygen isotopic analysis of zircons in combination with whole-rock geochemistry and Sr–Nd isotope analysis was performed on the two dominant rock types, amphibolite and felsic gneiss. Felsic gneisses exhibit enrichment of LREEs and LILEs (Rb, Ba, Th, K, Pb), negative Eu anomalies and depletion of HFSEs (Nb, Ta, P, Ti). The rocks have slightly elevated δ¹⁸O values (6.5–9.3 ‰) and initial ε _Nd values of ?4.6 corresponding to two-stage Nd model age of 1.99 Ga. Amphibolites are also enriched in LILEs and LREEs and depleted in Nb and Ta and have homogeneous δ¹⁸O values (5.0–6.0 ‰), but higher initial ε _Nd values (2.8–3.3) and younger two-stage Nd model ages (1.29–1.24 Ga) compared to the gneisses. The zircon age record indicates that the gneisses and amphibolites were formed in a ~960 Ma volcanic arc environment rather than in a rift setting as previously suggested. A major metamorphic event took place during the Early Paleozoic. Based on the age spectrum of detrital zircons, the Qinling Group is interpreted as an autonomous geological unit, which was mainly derived mostly from 1,000 to 900 Ma old granitoid rocks. The North Qinling Terrain can be regarded as a remnant of the Grenville orogenic belt with an early Neoproterozoic evolution different from that of the North and South China blocks.     

基于残余强度修正的岩石损伤软化统计本构模型研究

岩石随着围压的增大,残余强度的增加幅度比峰值强度大,残余强度逐渐成为影响岩石全应力-应变曲线峰后段的主要因素,因此,建立岩石损伤软化统计本构模型时,对残余强度进行修正是非常必要的。基于岩石应变强度理论以及岩石微元强度服从Weibull随机分布的假设,考虑岩石峰后残余强度对损伤变量进行修正,在微元破坏符合Hoek-Brown屈服准则条件下,建立了能够反映岩石峰后软化特征的三维损伤统计本构模型;依据岩石试验全应力-应变曲线的几何特征,推导出本构模型参数的数学表达式,并基于花岗岩室内试验数据对模型参数进行探讨,研究了Weibull分布参数与本构模型的关系,探讨了损伤修正系数的取值和岩石累积损伤的扩展过程;将建立的本构模型理论曲线与4种岩石（斑状二长花岗岩、细晶大理岩、砂岩和粉砂质泥岩）不同围压下的常规三轴压缩试验曲线进行对比分析,结果表明,该模型能很好地描述岩石破裂过程的全应力-应变关系和表征岩石残余强度特征。这对于岩石损伤软化问题以及岩石加固处理措施的研究均具有重要的意义。     

活性白云粉生产工艺及其物化性能研究

活性白云粉（ABP）是在白云岩经过破碎、细粉碎、表面改性的基础上得到的一种新型改性功能填料。本文利用河南辉县市的拍石头和张村两地产出的白云岩作为实验原料，对其表面改性的实验方法、改性剂选择及用量、改性条件及改性效果等方面进行了一定的探讨，并且对改性前后的白云石粉体的粒度、比表面积等性能及红外光谱特征做了对比研究。生产工艺和物性测试研究表明：活性白云粉代替轻质碳酸钙作橡胶填料前景广阔；与轻钙相比，活性白云粉的粒度不够均匀，经优化和改善生产工艺条件，可望进一步提高其应用价值。