陕西小秦岭华阳川韧性剪切带的特征 及其区域构造意义

陕西小秦岭华阳川韧性剪切带发育在新太古界太华群之中,野外调研和显微构造观察结果表明,该韧性剪切带是由构造片岩、眼球状片麻岩组成的深层次韧性剪切带,具有逆冲兼左行走滑的斜冲特征。对韧性剪切带构造片岩黑云母进行^40Ar／^39Ar同位素定年,获得坪年龄为419M±0．6Ma,反等时线年龄为417Ma±0．8Ma。认为华阳川韧性剪切带及其相应的小秦岭区域主导构造变形是发生于419Ma左右的秦岭加里东事件的结果。     

基于奇异值分解法的含量-面积法对化探异常的确定

地球化学场的数据通常具有分形的特征。应用奇异值分解方法对元素含量数据矩阵进行分解,对奇异值进行分形统计,得到了分形模型。重建元素含量的数据矩阵。然后利用含量-面积的分形方法对重建后的数据矩阵进行分形处理。使用MAPGIS软件进行统计分析,得出研究地区元素的异常下限,做出元素异常分布图,并与该地区已知矿点的分布图进行叠加分析,预测潜在的成矿区。     

均匀设计与灰色理论在边坡稳定性分析中的应用

采用均匀设计安排试验,运用灰色理论中的灰色关联分析考察边坡稳定性影响因素的主次.结果表明,边坡稳定性影响因素的敏感性由大到小依次为:粘聚力、内摩擦角、重度、预应力、锚索间排距、锚索长度、锚固段长度、锚固角.可见,岩体的抗剪强度指标是影响边坡稳定性的最重要参数,其次是岩体的容重,而预应力锚索的设计参数对边坡的稳定性也有一定影响.这一分析结果为边坡开挖设计和加固方案的优化提供了重要依据.     

姬塬油田长4＋5砂岩储层孔隙类型与成岩作用

通过常规物性、岩石及铸体薄片、重矿物、X射线衍射、扫描电镜等多项测试方法,对鄂尔多斯盆地姬塬油田长4 5含油砂体的岩石学特征、成岩作用、储集类型进行了分析和研究。长4 5储层孔隙主要以粒间孔和长石溶孔为主,粒间溶孔次之,孔隙组合一般以粒间孔和溶孔-粒间孔为主。本区破坏性成岩作用包括机械压实作用、石英及长石的次生加大、碳酸盐胶结作用等,其中压实作用是造成本区砂岩原生孔隙大量丧失的主要原因。建设性成岩作用为溶蚀作用、绿泥石粘土膜形成作用,但溶蚀作用产生的次生孔隙对储层物性的改善不足。     

Pelagic records from the Equatorial Ninetyeast Ridge and significant environmental events during the past 3.5 Ma

This paper presents pelagic records of planktic foraminifera, as well as data of stable isotope stratigraphy and carbonate stratigraphy since 3.5 Ma B.P. from site ODP758 in the Ninetyeast Ridge of the Indian Ocean. Based on these data, manifestations and related mechanisms of major tectonic and environmental events such as the rapid uplift of the Himalaya Mountains, “middle Pleistocene climatic transition” and “mid-Brunhes dissolution event” in the region are discussed. According to the analysis and comparison of various indices and changes in terms of foraminifera assemblage, paleotemperature, paleosalinity and themocline from site ODP758, the authors deduce that the paleoclimatic changes might correlate with the mid-Pleistocene transition at 1.4–1.7 Ma B.P. The changes of CaCO₃, mass accumulation rates (MAR) of CaCO₃ and non- CaCO₃ MAR indicate that the loaded terrigenous sediments increased at 1.7 Ma, which is in agreement with the uplift history of the Qinghai-Tibet plateau as shown by the available data. The last two changes coincide with the uplift of the Qinghai-Tibet plateau, hence they are called “Qinghai-Tibet movement” (1.7 Ma), and the “Kunlun-Yellow River movement” (1.2–0.6 Ma). The changes of the CaCO₃ content, coarse fraction (> 150 μm) content and planktonic foraminifera biostratigraphy show that strong dissolution of abyssal CaCO₃ occurred in the study region during 0.5–0.4 Ma. The event was consistent with the “mid-Brunhes dissolution event” in the sedimentary records of the Atlantic Ocean, Pacific Ocean, Indian Ocean and Nansha sea area of the South China Sea. __________ Translated from Geological Bulletin of China, 2007, 26(12): 1627–1632 [译自: 地质通报]     

光谱快速预选筛分算法研究

利用一组标准正交化的参考向量得到一个可能匹配区域,排除了绝大部分不可能匹配的样本,从而大大提高光谱预选筛分的速度;同时介绍了一种平衡速度与精度的编码替代算法.实验证明:压缩影像的目视效果较好,未产生边缘模糊及条带现象;采用自动目标生成方法(ATGP)从样本集中提取端元并进行光谱角度制图,其效果令人满意.     

GPS-RTK联合全站仪的野外数据采集

对于地形测绘和其它环境条件复杂的地区,用常规方法进行数据采集比较困难,传统的测绘方法越来越不能满足测量效率和成本的要求,但采用GPS RTK与全站仪联合作业,使RTK与全站仪优势互补,在保证测量精度的前提下,可大幅度提高测量速度和效率。     

山西天池煤矿构造特征及其形成机制

基于天池煤矿地质勘探资料,结合区域构造背景研究了矿井地质构造特征及形成机制。天池煤矿构造属简单构造,地层总体呈走向北东、倾向北西的单斜构造,矿井内褶皱发育程度较低,断层以正断层为主,其次为低角度逆掩断层。陷落柱分布较为杂乱,成群出现,常见于褶皱轴部。自三叠纪末期开始一直受到区域构造活动的控制作用,印支期受SN向的挤压,形成了一些近EW向的构造;燕山期经历两期NWW--SEE向挤压使井田内地层及煤层主体呈NE走向;喜山早期的NE—SW向挤压,导致NE向断层的性质发生转变;上新世开始表现为区域上的伸展作用。     

焦煤集团九里山矿14101工作面突水治理浅析

通过对焦煤集团九里山矿14101工作面底板突水经过的研究,认为工作面底板突水的水源是是Lg灰岩水,其直接补给水源为L2灰岩水,间接补给水源为O2灰岩水;导水通道为底板采动裂隙带。采取了在工作面打水闸墙,利用钻孔对采空区灌注骨料,增加水流阻力,切断导水通道,封堵水源,加固隔水层的地面注浆和井下工程相结合的综合治水方案。通过观察,工作面中间巷无水流出,突水前后水位变化明显,在较短时间内获得了堵水成功。取得了显著的经济效益和社会效益,为矿井突水治理积累了经验。     

The propagation of a single shear crack: A displacement discontinuity model

Numerical studies using the displacement discontinuity method show that a single shear crack under compression propagates in its own direction, because such propagation results in the maximum release of strain energy. The methods of linear elastic fracture mechanics may not be used for such a closed crack, and the stress intensity factors are meaningless in that case. Laboratory observations of propagation by means of kinks at an angle of approximately 70° to the crack may be due to heterogeneities, to the effect of a preexisting crack, to end effects, to microcracking, or to some combination of these factors. Such kinks may thus be local phenomena which cannot release most of the strain energy, and are not incompatible with our numerical results which are based on a global energy balance.