A spatio-temporal three-dimensional conceptualization and simulation of Dera Ismail Khan alluvial aquifer in visual MODFLOW: a case study from Pakistan

Dera Ismail Khan (DIK) is situated in the Lower Indus Basin of Pakistan. The land use has been changed in the canal command area due to irrigation activities near the Indus River. To check the current status and predict the groundwater levels in the area, the unconfined aquifer has been simulated in Visual MODFLOW for a period of 35 years, i.e., from 1985 to 2020. The 2900-km² area has been modeled with a grid of 500 by 500 m and the depth set to 100 m. The aquifer in the study area has been divided vertically and laterally into three and ten zones, respectively, for the characterization. Water wells and streams were used as the sinks and hydrologic boundaries, respectively. The model was successfully calibrated in steady and the non-steady state. The simulation revealed that the whole simulation can be divided into two phases, i.e., before and after the construction of the Chashma Right Bank Canal (CRBC), whereas the results were summarized in the form of water table depth maps and groundwater budget calculations. To determine the groundwater sustainability, a conjunctive use scenario has been employed to simulate the aquifer dynamics till 2020. The simulation revealed incremental drawdowns till the end.     

威海市“海联大厦”强夯法处理高填土,松软土地基工程实录

强夯法处理地基在我国应用发展已有十几年的历史，本文介绍的威海市“海联大厦”地基处理工程，以较大的吨位及能级进行高填土、松软土地基处理取得成功，成为威海市首例以较大吨位及能级强夯处理地基工程，文中着重介绍了方案选择、强夯设计、强夯施工及效果检测情况，综合地进行了技术、经济效果评价。     

水浴消解-顺序注射-氢化物发生原子荧光光谱法测定铁矿石中砷和汞

采用水浴加热低温消解浸取铁矿石样品,顺序注射-氢化物发生原子荧光光谱法测定铁矿石样品中砷和汞的含量.选择了消解试剂,研究了硼氢化钾浓度、载气流量、屏蔽气流量、溶液酸介质、载流、溶液酸碱比例、样品中的主要基体元素等因素对砷和汞测定的干扰,并确立了适宜的测定条件.砷浓度在0～100 μg/L与荧光强度呈良好的线性关系,砷的...     

Effects of biochar and bio-fertilizer on yield and qualitative properties of soybean and some chemical properties of soil

This study attempted to examine the effects of biochar amendment together with bio-fertilizer on soybean yield and its qualitative properties, as well as a few chemical properties of soil through a factorial randomized complete block design at three replications in east of Golestan Province (Iran) during 2014. The two factors under study included the following: (1) biochar amendment (in four levels of 0, 2.5, 8, and 16 tons per hectare), (2) bio-fertilizer containing phosphorus and sulfur growth-promoting rhizobacteria (in two levels of inoculation and non-inoculation) applied through foliar feeding. The results of analysis of variance indicated that interactions of biochar amendment and bio-fertilizer on harvest index and grain yield were significant (p ≤?0.01). According to the results of this study, the highest harvest index and oil content were 56.9, and 17.7%, respectively, in the treatment of 8 tons per hectare biochar and inoculation with bio-fertilizer. The lowest harvest index and the lowest oil content were in the control treatment. The interaction of biochar and bio-fertilizer on bulk density and cation exchange capacity was significant (p ≤?0.01). The results of this study demonstrated that biochar affected the amount of residual nitrogen in the soil after harvest, cation exchange capacity (CEC), acidity (pH), and electrical conductivity (EC). The highest grain yield (3440 kg/ha) was in the 8-ton biochar treatment with inoculated bio-fertilizer. Our study concludes that the biochar and bio-fertilizers can improve grain yield of soybean till 51% relative to the control.     

Evidence for the occurrence of hydrogeochemical processes in the groundwater of Khoy plain,northwestern Iran,using ionic ratios and geochemical modeling

Rapid population growth, industrialization, and agricultural expansion in the Khoy area (northwestern Iran) have led to its dependence on groundwater and degradation of groundwater quality. This study attempts to decipher the major processes and factors that degrade the groundwater quality of the Khoy plain. For this purpose, 54 groundwater samples from unconfined and confined aquifers of the plain were collected in July 2017 and analyzed for major cations and anions (Na, K, Ca, Mg, HCO₃, SO_4, and Cl), minor ions (NO₃ and F), and Al. Magnesium and bicarbonate were identified as the dominant cation and anion, respectively. Several ionic ratios and geochemical modeling using PHREEQC indicated that the most important hydrogeochemical processes to affect groundwater quality in the plain were weathering and dissolution of evaporitic and silicate minerals, mixing, and ion exchange. There were smaller effects from evaporation and anthropogenic factors (e.g., industries). Results showed that the high salinity of the groundwater in the northeast area of the plain was due to the high solubility of the evaporitic minerals, e.g., halite and gypsum. Reverse ion exchange and the contribution of mineral dissolution were more significant than ion exchange in the northeastern part of the plain. Elevated salinity of the groundwater in the southeast was attributed mostly to reverse ion exchange and somewhat to evaporation.     

Hydrogeochemical processes of thallium in a rural area of Southwest Guizhou, China

The water system in a rural area of Lanmuchang in Southwest Guizhou is facing a risk of thallium (Tl) contamination due to Tl mineralization around the area. The major trace elements and Tl in the water system are studied to understand the hydrogeochemical processes of Tl constrained by Tl mineralization. The results showed that the dispersion pattern of Tl follows a descending order in concentration from mine groundwater (deep groundwater) →stream water→shallow groundwater→background water, reflecting the impact of Tl mineralization on the hydrogeochemical composition. Tl concentrations in stream water in both regimes are remarkably higher (2-30 fold) downstream than up- and mid-streams, probably caused by the unidentified discharge of deep groundwater. Low Tl levels are detected in the current drinking water, however, the highly elevated Tl in stream water and ground water may pose a potential environmental risk through daily washing and agricultural irrigation. This study suggests that human activities, such as agricultural irrigation, could intensify the environmental risk of Tl.     

On the Collision Nature of Two Coronal Mass Ejections: A Review

Observational and numerical studies have shown that the kinematic characteristics of two or more coronal mass ejections (CMEs) may change significantly after a CME collision. The collision of CMEs can have a different nature, i.e. inelastic, elastic, and superelastic processes, depending on their initial kinematic characteristics. In this article, we first review the existing definitions of collision types including Newton’s classical definition, the energy definition, Poisson’s definition, and Stronge’s definition, of which the first two were used in the studies of CME–CME collisions. Then, we review the recent research progresses on the nature of CME–CME collisions with the focus on which CME kinematic properties affect the collision nature. It is shown that observational analysis and numerical simulations can both yield an inelastic, perfectly inelastic, merging-like collision, or a high possibility of a superelastic collision. Meanwhile, previous studies based on a 3D collision picture suggested that a low approaching speed of two CMEs is favorable for a superelastic nature. Since CMEs are an expanding magnetized plasma structure, the CME collision process is quite complex, and we discuss this complexity. Moreover, the models used in both observational and numerical studies contain many limitations. All of the previous studies on collisions have not shown the separation of two colliding CMEs after a collision. Therefore the collision between CMEs cannot be considered as an ideal process in the context of a classical Newtonian definition. In addition, many factors are not considered in either observational analysis or numerical studies, e.g. CME-driven shocks and magnetic reconnections. Owing to the complexity of the CME collision process, a more detailed and in-depth observational analysis and simulation work are needed to fully understand the CME collision process.     

云南云龙天池枝角类群落演替对1950s以来人类活动影响信号的识别

从1950s开始,云南地区部分湖泊受到了水文调控(如筑坝)和鱼类引入等流域开发活动的直接影响,湖泊水环境与生态系统结构已出现明显改变.开展浮游动物群落的长期生态响应评价有助于认识气候波动和人为胁迫的影响模式.本文选取云龙天池进行了沉积物记录分析,在重建过去100年环境变化历史的基础上开展了枝角类群落的多指标分析(物种组成、个体大小、生物量等),进一步结合多变量分析识别了枝角类群落构建的关键驱动因子.结果显示,云龙天池在过去100年间经历了明显的水位波动,约1962年以前水位较低,1950s起的水文调控(筑坝)导致湖泊水位波动上升,2006年以来略有下降.枝角类群落随水位波动呈现由底栖种向浮游种占优转变的模式,并在2006年以来底栖种略有增加.总体上,低水位时期底栖枝角类占优,高水位时期浮游枝角类占优.水体营养水平也对枝角类群落产生了较为显著的影响.在沉积物总氮和有机质通量上升时,长额象鼻溞(Bosmina longirostris)相对丰度和枝角类浓度都明显上升.枝角类象鼻溞个体大小表明,1969年鱼类引入后象鼻溞的壳长、壳刺长度、触角长度显著减小,反映了鱼类捕食压力上升的影响.本研究...     

Asymmetric variability between maximum and minimum temperatures in Northeastern Tibetan Plateau: Evidence from tree rings

Ecological systems in the headwaters of the Yellow River, characterized by hash natural environmental conditions, are very vulnerable to climatic change. In the most recent decades, this area greatly attracted the public's attention for its more and more deteriorating environmental conditions. Based on tree-ring samples from the Xiqing Mountain and A'nyêmagên Mountains at the headwaters of the Yellow River in the Northeastern Tibetan Plateau, we reconstructed the minimum temperatures in the winter half year over the last 425 years and the maximum temperatures in the summer half year over the past 700 years in this region. The variation of minimum temperature in the winter half year during the time span of 1578―1940 was a relatively stable trend, which was followed by an abrupt warming trend since 1941. However, there is no significant warming trend for the maximum temperature in the summer half year over the 20th century. The asymmetric variation patterns between the minimum and maximum temperatures were observed in this study over the past 425 years. During the past 425 years, there are similar variation patterns between the minimum and maximum temperatures; however, the minimum temperatures vary about 25 years earlier compared to the maximum temperatures. If such a trend of variation patterns between the minimum and maximum temperatures over the past 425 years continues in the future 30 years, the maximum temperature in this region will increase significantly.     

COULOMB STRESS CHANGE ON ACTIVE FAULTS IN SICHUAN-YUNNAN REGION AND ITS IMPLICATIONS FOR SEISMIC HAZARD

Coulomb stress change on active faults is critical for seismic hazard analysis and has been widely used at home and abroad. The Sichuan-Yunnan region is one of the most tectonically and seismically active regions in Mainland China, considering some highly-populated cities and the historical earthquake records in this region, stress evolution and seismic hazard on these active faults capture much attention. From the physical principal, the occurrence of earthquakes will not only cause stress drop and strain energy release on the seismogenic faults, but also transfer stress to the surrounding faults, hence alter the shear and normal stress on the surrounding faults that may delay, hasten or even trigger subsequent earthquakes. Previously, most studies focus on the coseismic Coulomb stress change according to the elastic dislocation model. However, the gradually plentiful observation data attest to the importance of postseismic viscoelastic relaxation effect during the analysis of seismic interactions, stress evolution along faults and the cumulative effect on the longer time scale of the surrounding fault zone. In this paper, in order to assess the seismic hazard in Sichuan-Yunnan region, based on the elastic dislocation theory and the stratified viscoelastic model, we employ the PSGRN/PSCMP program to calculate the cumulative Coulomb stress change on the main boundary faults and in inner blocks in this region, by combining the influence of coseismic dislocations of the M≥7.0 historical strong earthquakes since the Yongsheng M7.8 earthquake in 1515 in Sichuan-Yunnan region and M≥8.0 events in the neighboring area, and the postseismic viscoelastic relaxation effect of the lower crust and upper mantle. The results show that the Coulomb stress change increases significantly in the south section of the Xianshuihe Fault, the Anninghe Fault, the northern section of the Xiaojiang Fault, the southern section of the Longmen Shan Fault, the intersection of the Chuxiong-Jianshui Fault and the Xiaojiang Fault, and the Shawan section of the Litang Fault, in which the cumulative Coulomb stress change exceeds 0.1MPa. The assuming different friction coefficient has little effect on the stress change, as for the strike-slip dominated faults, the shear stress change is much larger than the normal stress change, and the shear stress change is the main factor controlling the Coulomb stress change on the fault plane. Meanwhile, we compare the Coulomb stress change in the 10km and 15km depths, and find that for most faults, the results are slightly different. Additionally, based on the existing focal mechanism solutions, we add the focal mechanism solutions of the 5 675 small-medium earthquakes(2.5≤M≤4.9)in Sichuan-Yunnan region from January 2009 to July 2019, and invert the directions of the three principal stresses and the stress shape factor in 0.1°×0.1° grid points; by combining the grid search method, we compare the inverted stress tensors with that from the actual seismic data, and further obtain the optimal stress tensors. Then, we project the stress tensors on the two inverted nodal planes separately, and select the maximum Coulomb stress change to represent the stress change at the node. The results show that the cumulative Coulomb stress change increase in the triple-junction of Sichuan-Yunnan-Tibet region is also significant, and the stress change exceeds 0.1MPa. Comprehensive analysis of the Coulomb stress change, seismic gaps and seismicity parameters suggest that more attention should be paid to the Anninghe Fault, the northern section of the Xiaojiang Fault, the south section of the Xianshuihe Fault, the southern section of the Longmen Shan Fault and the triple-junction of the Sichuan-Yunnan-Tibet region. These results provide a basis for future seismic hazard analysis in the Sichuan-Yunnan region.